Controller-Processor Terms. The Controller-Processor Terms set forth in this Section 6 will apply only in connection with Customer’s use of the Processor Services and Unity’s processing of personal data in connection therewith.
Controller-Processor Terms Sample Clauses
Related to Controller-Processor Terms
Quality Control Procedures The Seller shall have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program shall include evaluating and monitoring the overall quality of the Seller's loan production and the servicing activities of the Seller. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with Accepted Servicing Standards and the Underwriting Guidelines; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.
General Servicing Procedures Section 6.01
Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.
SUPERVISION AND CONSTRUCTION PROCEDURES 4.3.1 The Contractor shall supervise and direct the Work, using his / her best skill and attention. The Contractor shall be solely responsible for all construction means, methods, techniques, sequences and procedures and for coordinating all portions of the Work under the Contract. All aspects of the Project shall be subject to the inspection and approval of the State. Contractor guarantees to repair, replace, re-execute or otherwise correct any defect in workmanship, materials, or the like that fails to conform to the requirements of this Contract or that appears during the progress of the Work or within one year of final acceptance by the State. 4.3.2 The Contractor shall be responsible to the State for the acts and omissions of his / her employees, Subcontractors and their agents and employees, and other persons performing any of the Work under a contract with the Contractor. 4.3.3 The Contractor shall not be relieved from his / her obligations to perform the Work in accordance with the Contract Documents either by the activities or duties of the Architect in his / her administration of the Contract, or by inspections, tests or approvals required or performed under Paragraph 7.7 by persons other than the Contractor. 4.3.4 The Contractor shall acquaint himself (herself / itself) with the limits of the property or right- of-way of the State and shall not trespass on other property. The Contractor shall adequately protect the project, adjacent property and the public, and shall be responsible for any damage or injury due to the Contractor’s act or neglect, and shall save the State harmless in respect thereto. 4.3.5 All work shall be done in such a manner as not to interfere with the State’s operating functions. Contractor and his employees shall familiarize themselves and comply with all rules and regulations applicable to the project. 4.3.6 The Contractor shall keep the premises free from liens arising out of or from the Project. Contractor shall obtain and submit waivers of liens with a request for a progress or final payment.
Additional Procedures Once initiated by an Auction Notice, the Borrowers may withdraw a Dutch Auction by written notice to the Auction Manager no later than 24 hours before the original Expiration Time so long as no Qualifying Bids have been received by the Auction Manager at or prior to the time the Auction Manager receives such written notice from the Borrower Representative. Any Return Bid (including any component bid thereof) delivered to the Auction Manager may not be modified, revoked, terminated or cancelled; provided that a Term Loan Lender may modify a Return Bid at any time prior to the Expiration Time solely to reduce the Reply Price included in such Return Bid. However, a Dutch Auction shall become void if the Borrowers fail to satisfy one or more of the conditions to the purchase of Term Loans set forth in, or to otherwise comply with the provisions of Section 10.6(c) of the Second Lien Credit and Guaranty Agreement. The purchase price for all Term Loans purchased in a Dutch Auction shall be paid in cash by the Borrowers directly to the respective assigning Term Loan Lender on a settlement date as determined by the Auction Manager in consultation with the Borrowers (which shall be no later than ten (10) Business Days after the date Return Bids are due), along with accrued and unpaid interest (if any) on the applicable Term Loans up to the settlement date. The Borrowers shall execute each applicable Auction Assignment and Acceptance received in connection with a Qualifying Bid. All questions as to the form of documents and validity and eligibility of Term Loans that are the subject of a Dutch Auction will be determined by the Auction Manager, in consultation with the Borrowers, and the Auction Manager’s determination will be conclusive, absent manifest error. The Auction Manager’s interpretation of the terms and conditions of the Offer Document, in consultation with the Borrowers, will be final and binding. None of the Administrative Agent, the Auction Manager, any other Agent or any of their respective Affiliates assumes any responsibility for the accuracy or completeness of the information concerning the Borrowers, the Restricted Subsidiaries or any of their Affiliates contained in the Offer Documents or otherwise or for any failure to disclose events that may have occurred and may affect the significance or accuracy of such information. The Auction Manager acting in its capacity as such under a Dutch Auction shall be entitled to the benefits of the provisions of Sections 9, 10.2 and 10.3 of the Second Lien Credit and Guaranty Agreement to the same extent as if each reference therein to the “Administrative Agent” were a reference to the Auction Manager, each reference therein to the “Credit Documents” were a reference to the Offer Documents, the Auction Notice and Auction Assignment and Acceptance and each reference therein to the “Transactions” were a reference to the transactions contemplated hereby and the Administrative Agent shall cooperate with the Auction Manager as reasonably requested by the Auction Manager in order to enable it to perform its responsibilities and duties in connection with each Dutch Auction. This Appendix C shall not require any Borrower or any Restricted Subsidiary to initiate any Dutch Auction, nor shall any Term Loan Lender be obligated to participate in any Dutch Auction. 1. Not later than the date that is three Business Days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), Corsair Memory (Cayman) Ltd. shall have transferred to Corsair Components, Inc., all of the Equity Interests of Corsair Components, Inc. owned by Corsair Memory (Cayman) Ltd. and such Equity Interests shall have been converted into treasury shares, or such Equity Interests shall have been cancelled. 2. Not later than the date that is 20 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received evidence, in form and substance reasonably satisfactory to it, that (i) the HK Process Agent has accepted the appointment by the Borrower Representative and/or Holdings for a period ending one year after the Term Loan Maturity Date and (ii) all fees in connection with such appointment, if any, have been paid for the entire term of such appointment. 3. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received, all Delayed Approvals, Guarantees and Security that were not delivered by the Credit Parties on or prior to the Closing Date pursuant to Section 3.1(r) of the Agreement. 4. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received all lender’s loss payable and additional insured endorsements as described in and required by Section 5.5, in form and substance reasonably satisfactory to the Administrative Agent. 5. Not later than the date that is 45 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received, an amendment to the Organizational Documents of Corsair Components Limited removing any restrictions with respect to any pledge of its Equity Interests owned by Corsair (Hong Kong) Limited or any other Person as collateral security for the Obligations, in form and substance reasonably satisfactory to the Administrative Agent. 6. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), (a) Corsair Components B.V. shall have been wound up or dissolved, (b) all of Corsair Components B.V.’s business, property and assets shall have been conveyed, sold, leased, transferred or otherwise disposed of, in one transaction or a series of transactions, to another Credit Party and (c) the Administrative Agent shall have received one or more Foreign Collateral Documents duly executed and delivered by each applicable Credit Party as may be required by the Administrative Agent in order to create, perfect and establish a first priority Lien on all of the Equity Interests of Corsair (Hong Kong) Limited as Collateral for the Obligations, unless prior to such date, the Administrative Agent shall have received (i)(A) a Counterpart Agreement duly executed and delivered by Corsair Components B.V., (B) one or more applicable Collateral Documents, agreements, instruments, approvals or other documents required under Section 5.11 with respect to new Subsidiaries of Holdings to create, perfect and establish a first priority Lien on all of the Equity Interests of Corsair Components B.V. and all property and assets of Corsair Components B.V. as Collateral for the Obligations.
Other Procurement Procedures National Competitive Bidding
Additional Wet Weather Procedure 14.15.1 Remaining On Site a) for more than an accumulated total of four hours of ordinary time in any one day; or b) after the meal break, as provided for in clause 17.1 of the Award, for more than an accumulated total of 50% of the normal afternoon work time; or c) during the final two hours of the normal work day for more than an accumulated total of one hour, the Enterprise will not be entitled to require the employees to remain on site beyond the expiration of any of the above circumstances.
Operational Procedures In order to minimize operational problems, it will be necessary for trade information to be supplied in a secure manner by the Subadviser to the Fund’s Service Providers, including: JPMorgan Chase Bank, National Association (the “Custodian”), Virtus Fund Services (the “Fund Administrator”) BNY Mellon Investment Servicing (US) Inc., (the “Sub-Accounting Agent”), any Prime Broker to the Series, and all other Counterparties/Brokers as required. The Subadviser must furnish the Fund’s service providers with required daily information as to executed trades in a format and time-frame agreed to by the Subadviser, Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties and designated persons of the Fund. Trade information sent to the Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties must include all necessary data within the required timeframes to allow such parties to perform their obligations to the Series. The Sub-Accounting Agent specifically requires a daily trade blotter with a summary of all trades, in addition to trade feeds, including, if no trades are executed, a report to that effect. Daily information as to executed trades for same-day settlement and future trades must be sent to the Sub-Accounting Agent no later than 4:30 p.m. (Eastern Time) on the day of the trade each day the Fund is open for business. All other executed trades must be delivered to the Sub-Accounting Agent on Trade Date plus 1 by Noon (Eastern Time) to ensure that they are part of the Series’ NAV calculation. (The Subadviser will be responsible for reimbursement to the Fund for any loss caused by the Subadviser’s failure to comply with the requirements of this Schedule A.) On fiscal quarter ends and calendar quarter ends, all trades must be delivered to the Sub-Accounting Agent by 4:30 p.m. (Eastern Time) for inclusion in the financial statements of the Series. The data to be sent to the Sub-Accounting Agent and/or Fund Administrator will be as agreed by the Subadviser, Fund Administrator, Sub-Accounting Agent and designated persons of the Fund and shall include (without limitation) the following:
CUSTOMER SERVICE FUNCTIONS The Servicer shall handle all Customer inquiries and other Customer service matters according to the same procedures it uses to service Customers with respect to its own charges.
Construction Phase - Administration of the Construction Contract INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE 1.1.9.1. The Construction Phase will commence with the award of the Construction Contract to a selected vendor (“Contractor”) and will terminate when final payment is made by the State to the Contractor. In any event, the construction phase will not extend 60 days beyond the substantial completion date unless extended by change order. If such extension occurs, additional costs due to the ARCHITECT/ENGINEER shall be negotiated with the State. 1.1.9.2. The ARCHITECT/ENGINEER shall work with the State during the construction of the Project to provide the administration of the contract between the State and the Contractor in accordance with the terms herein and consistent with the contract between the State and the Contractor, and the extent of his/her duties and responsibilities and the limitations of his/her authority as assigned therein shall not be modified without his/her written consent. 1.1.9.3. The ARCHITECT/ENGINEER shall advise and consult with the State, and all of the State's instructions to the Contractor shall be issued through the ARCHITECT/ENGINEER after authorization by the State. 1.1.9.4. The ARCHITECT/ENGINEER shall, at all times, have access to the work wherever it is in preparation or progress. 1.1.9.5. The ARCHITECT/ENGINEER shall make periodic visits to the Project site, at least biweekly, and shall make such further visits when reasonably requested by the State, as to familiarize himself/herself with the progress and quality of the work performed and as to determine, on the basis of such visits, if such progress and quality are in accordance with the Contract Documents. The ARCHITECT/ENGINEER shall be responsible for project meeting minutes. In addition to this, the ARCHITECT/ENGINEER shall periodically report his/her findings thereon to the State, at such times as in the exercise of his/her professional judgment such findings are appropriate and at least monthly, at the conference provided for in Section 1.1.9.6, and further at such times as the State may reasonably request. The ARCHITECT/ENGINEER shall not be required to make exhaustive or continuous on-site inspections, except as required in the exercise of his/her professional judgment for said reports and, except in particular, to fulfill the commissioning requirements. The ARCHITECT/ENGINEER shall not be responsible for construction means, methods, techniques, sequences or procedures or for safety precautions and programs in connection with the work, and he/she shall not be responsible for the Contractor's failure to carry out the work in accordance with the Contract Documents except as provided for herein specifically between the State and the ARCHITECT/ENGINEER. 1.1.9.6. In preparing the bid documents, to the extent that the ARCHITECT/ENGINEER utilizes sub- consultants for their expertise, such as, but not limited to: Landscape Architects, Civil, Structural, Mechanical, and Electrical Engineers, these consultants, in effect, become an extension of the ARCHITECT/ENGINEER. Where the term ARCHITECT/ENGINEER is used in Section 1.1.9.2 as well as 1.1.9.5, it shall include those sub-consultants when work is being performed in their area of expertise. For example, the Mechanical Engineer would inspect the under slab plumbing before it is backfilled, but then wouldn’t necessarily be needed on site until the rest of the mechanical systems are being installed. The sub-consultant shall also be required to periodically inspect the progress of the “As-builts” and verify that they are up-to-date and verify such to the ARCHITECT/ENGINEER, before the ARCHITECT/ENGINEER issues the certificate of payment for that pay period. 1.1.9.7. Based upon his/her determinations and reports made under Section 1.1.9.5 of this Agreement and upon the Contractor's applications for payment, the ARCHITECT/ENGINEER shall once every month, after an on-site conference between the State, the Contractor and the ARCHITECT/ENGINEER, determine the amount then owing to the Contractor and shall then issue a certificate of payment for the amount agreed upon. The issuance of a Certificate for Payment shall constitute a representation by the ARCHITECT/ENGINEER to the State, based on such ARCHITECT/ENGINEER'S determination and report and the data supplied to him/her by the Contractor (without affecting his/her duties defined in Section 1.1.9.5.), that the work has progressed to the point indicated; that the quality of the work is in accordance with the Contract Documents (subject to the results of any specified subsequent tests required by the Contract Documents, to immaterial and insubstantial deviations from the Contract Documents, which will be corrected prior to completion, and to any further specific qualifications stated in the Certificate for Payment); and that the Contractor is entitled to such payment in the amount certified. Provided, however, the issuance of such certificate will not affect any obligations of the Contractor to the State. By issuing a certificate for payment, the ARCHITECT/ENGINEER shall not be deemed to represent that he/she has made any examination to ascertain how and for what purpose the Contractor has used the monies paid on account of the contract sum. ARCHITECT/ENGINEER shall not accept any part of the work on behalf of the State; ARCHITECT/ENGINEER may only recommend acceptance. Final acceptance is a right reserved solely to the State. 1.1.9.8. The ARCHITECT/ENGINEER shall be, in the first instance, the interpreter of the requirements of all Construction Documents, and shall have all requisite authority relating thereto for the purposes of authorizing the Contractor to proceed or stop with any component of the project after consultation and agreement with the State. The ARCHITECT/ENGINEER shall not be liable to the State for any loss or cost incurred by the State arising from delays in the construction schedule caused by any decision made by the ARCHITECT/ENGINEER in the reasonable exercise of professional judgment either to exercise or not to exercise his/her authority to stop the Work. 1.1.9.9. The ARCHITECT/ENGINEER shall review and respond to shop drawings, samples, and other submissions of the Contractor as in conformance with the design concept and information in the Contract Documents and the designs and plans relating to the project until approved or not requiring re-submission. The ARCHITECT/ENGINEER shall also review the submittal log at construction meetings and report to the State, on a monthly basis, their findings thereon. 1.1.9.10. The ARCHITECT/ENGINEER shall prepare all change orders and supporting data for the State's approval. 1.1.9.11. The ARCHITECT/ENGINEER shall conduct inspections to determine the Dates of Substantial Completion and Final Completion and shall receive written guarantees and related documents assembled by the Contractors and shall issue a final certificate of payment in accordance with Section 1.1.9.6. 1.1.9.12. The ARCHITECT/ENGINEER shall be responsible for system commissioning in accordance with the BGS Design Guidelines and as indicated in the BGS Commissioning Guidelines. Please see the BGS website xxxx://xxx.xxxxxxx.xxx/facilities/forms . The ARCHITECT/ENGINEER shall inspect, and document, each and every system to ensure that it complies with design intent, including but not limited to: system installation, system operation, and seasonal changeover. 1.1.9.13. Except in the manner specifically provided for herein, the ARCHITECT/ENGINEER shall not be responsible to the State for the acts or omissions of the Contractor or any of the Contractor’s agents or employees, or any other person not an employee or agent of the ARCHITECT/ENGINEER performing work on the Project. The ARCHITECT/ENGINEER shall be responsible for and shall pay the amount of any increase in the total Contract Price or the total Change Order(s) Price, which increase results from an error, inconsistency, or omission in the Contract Documents or instructions. 1.1.9.14. ARCHITECT/ENGINEER shall furnish to the State, a complete set of marked-up drawings and specifications showing all the changes to the Construction Documents made by Addenda, Change Orders, Shop Drawings, RFIs and other information received from the Clerk; and General Contractor’s As-built markups. The changes to the drawings are to be created on a separate layer in the DWG set and highlighted in a box, cloud or the like in the PDF set. The specifications are also to differentiate the changes made by highlighting in a box, cloud, etc. and be provided in Microsoft Word. These drawings and specifications shall be supplied within three (3) months of the date of Substantial Completion and before final payment. 1.1.9.15. Architect/Engineer (and design team members as required) shall conduct a one-year warranty inspection of the completed construction project between the eleventh and twelfth month from the date of substantial completion and shall issue a list of defective items needing correction to the Contractor.
