Cryo-coolers Sample Clauses

Cryo-coolers. The State-of-the-Art performance capability for cryo-coolers is fundamentally dictated by their adaptiveness to a wide variety of application sectors in industry and science. Cryocoolers cover the small-scale power range and are limited in efficiency due to their working principle. Striving to achieve higher efficiencies and capacities at lower temperatures, in order to make such technologies more attractive to SRF applications is a key driving motivation. Their advantage is a relatively small technical effort for local cooling.
AutoNDA by SimpleDocs
Cryo-coolers. Innovative materials and adopting development technologies employed from space industry applications, would provide high heat capacity and improved insulation performance. A two orders of magnitude cooling power gap currently exists between cryo-coolers and cryoplants. New cryogenic fluid mixtures offer the opportunity for efficient and cost-effective cryogenic cooling in the mid-scale power range for decentralised local cooling of accelerator equipment. Larger numbers of smaller cryo-cooler units also offers a better market for cryogenic industry.

Related to Cryo-coolers

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • GRILLS Individually owned grills, smokers, hibachis, and other outside cooking appliances may not be used or stored on the premises.

  • Brakes Master cylinder, wheel cylinders, hydraulic lines and fittings, power booster and brake callipers. Excludes linings, pads, drums and discs.

  • KITCHEN  Discard all leftover food in large trash receptacle in kitchen and empty any smaller trash receptacles if used into large trash can in kitchen.  Empty large trash bin into the dumpster, (if feasible). If not, please notify front desk.  Flatware is to be pre-soaked, washed in dishwasher, dried, returned to drawers and placed facing in the same direction.  Dishes, glassware, chopping boards, cooking utensils, pots/pans, baking sheets etc. should be washed in accordance with the instructions on the dish washing machine and returned DRY to dish carts and cupboards. Please check for lipstick/chap stick marks and clean those off accordingly before putting glasses/cups away.  Wipe down outside of dishwasher, empty dishwasher food trap into trash and wash out.  Counters and sinks wiped down with the water and bleach solution.  If used, please wipe inside and out microwave oven; wall/warming ovens, inside the refrigerator and refrigerator door.  Run garbage disposal in large double sink by dishwashing machine to clear food waste (Please do not put any food waste in small sinks).  Wipe out Alto-Shaam (Warming Ovens) and clean food trays if used.  Rinse out any Dish Tubs.  Empty any tubs of excess ice outside, if used.  Sweep floor of food debris.  Empty large trash bin into the dumpster (if feasible). If not please notify front desk. B BQ’s:  Make sure propane is turned off after use  Clean grill racks with wire brush and wipe up any spills /food debris from the BBQ  Leave outside to cool.  Please check with Front Desk regarding storage of cold and cleaned BBQ’s PATIO:  Return outdoor umbrellas and furniture to original positions.  Wipe down outdoor furniture if spills have occurred.  Dispose of trash/food waste and cigarette butts in trash receptacles. The following applies if any food and/or beverages have been served in these rooms: GREAT ROOM:  Wipe down tables with bleach /water solution. (Located under the sink in the kitchen next to the coffee maker).  If linens have been used or rented, please shake off any food debris in trash receptacles and place linens in mesh bags provided. Sorting by color or type is not necessary.  Notify front desk of any beverage spills as soon as they occur.  Empty any trash receptacles into large trash can in kitchen and then empty that into the dumpster (if feasible). If not please notify front desk.  Sweep/Vacuum carpet of any food debris. (These items are located in the cupboard next to Men’s restroom.

  • Vlastnictví Zdravotnické zařízení si ponechá a bude uchovávat Zdravotní záznamy. Zdravotnické zařízení a Zkoušející převedou na Zadavatele veškerá svá práva, nároky a tituly, včetně práv duševního vlastnictví k Důvěrným informacím (ve smyslu níže uvedeném) a k jakýmkoli jiným Studijním datům a údajům.

  • Blasting Blasting shall be permitted only for road construction purposes unless advance permission is obtained from Forest Service. Whenever the Industrial Fire Precaution Level is II or greater, a fire security person equipped with a long handled round point No. 0 or larger shovel and a 5 gallon backpack pump can filled with water, will stay at location of blast for 1 hour after blasting is done. Blasting may be suspended by Forest Service, in areas of high rate of spread and resistance to control. Fuses shall not be used for blasting. Explosive cords shall not be used without permission of Forest Service, which may specify conditions under which such explosives may be used and precautions to be taken.

  • Firefighters Any truck with an inoperative aerial ladder shall be regularly and routinely staffed with one (1) officer and five (5) firefighters for the period of time that the aerial ladder is inoperative, or until such time as the truck with the inoperative aerial ladder is replaced with a truck with an operative aerial ladder. At 0800 and 2000 hours, all trucks shall be staffed with one (1) officer and four (4) firefighters, and any truck with an inoperative aerial ladder shall be staffed with one (1) officer and five (5) firefighters.

  • Prosthodontics We Cover prosthodontic services as follows: • Removable complete or partial dentures, for Members 15 years of age and above, including six (6) months follow-up care; • Additional services including insertion of identification slips, repairs, relines and rebases and treatment of cleft palate; and • Interim prosthesis for Members five (5) to 15 years of age. We do not Cover implants or implant related services. Fixed bridges are not Covered unless they are required: • For replacement of a single upper anterior (central/lateral incisor or cuspid) in a patient with an otherwise full complement of natural, functional and/or restored teeth; • For cleft palate stabilization; or • Due to the presence of any neurologic or physiologic condition that would preclude the placement of a removable prosthesis, as demonstrated by medical documentation.

  • Welders a) The following shall be the recognized classifications of “

  • Welder (a) The Welder shall when issued a specific job assume the role of a Welder and representative of the Employer and take the initiative to perform the work, according to the best practice of this industry. Where circumstances are beyond his or her control he or she shall immediately advise the Employer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!