Deadline for Submission of the Bids Sample Clauses

Deadline for Submission of the Bids. 15.1 Bids must be received by the Purchaser at the address specified above not later than 1600 Hours on 04 Sep 2019. In the event of the specified date for the submission of bids declared a holiday for the Purchaser, the Bids will be received upto the appointed time on the next working day. 15.2 The Purchaser may extend the deadline for submission of bids by issuing an amendment in accordance with Clause 12.3, in which case all rights and obligations of the Purchaser and the bidders previously subject to the original deadline will then be subject to the new deadline.
AutoNDA by SimpleDocs
Deadline for Submission of the Bids. Complete Bids (including Technical and Financial) must be uploaded online through a e-portal before the date and time (as per server clock) as specified in the appendix to ITB. The department does not take any responsibility for the delay caused due to non-availability of internet connection or network traffic jam etc.
Deadline for Submission of the Bids. 20.1 Complete Bids (including Technical and Financial) shall be received by Executive Engineer, Construction Division, Punjab PWD B&R Branch, Sirhind on behalf of the Employer at the PIDB Chandigarh address given on Page 1 of this document not later than the date indicated in appendix. In the event of the specified date for the submission of bids declared a holiday for the Employer, the Bids will be received upto the appointed time on the next working day. 20.2 The Employer may extend the deadline for submission of bids by issuing an amendment in accordance with Clause 10, in which case all rights and obligations of the Employer and the bidders previously subject to the original deadline will then be subject to the new deadline.
Deadline for Submission of the Bids. 22.1 Bids must be received by the Employer at the address specified above not later than 28.03.
Deadline for Submission of the Bids. 20.1 Bids must be received by the Employer online not later than ………………. hours on ……………….. 20.2 The Employer may extend the deadline for submission of bids by issuing an amendment in accordance with Clause 10, in which case all rights and obligations of the Employer and the bidders previously subject to the original deadline will then be subject to the new deadline.

Related to Deadline for Submission of the Bids

  • Deadline for Submission of Bids 19.1 Bids must be received by the Purchaser at the address specified under ITB Clause 18.2 no later than the time and date specified in the Bid Data Sheet.

  • Submission of Bids The Tender shall be submitted in two part: one comprising a Technical Tender and one containing the Commercial Tender. The Technical Tender shall contain all the required documents requested in the Tender Documents excluding any financial references. The Commercial Tender shall contain all financial documents and information. Bidders who fail to adhere to this requirement will result in the disqualification of their Tender. The Bid Form together with all information and documentation shall be completed and submitted by email only. The bidder must affix its initialed company stamp to every page of its original Tender submission which should include all parts of the Tender Documents. The original shall be clearly marked “ORIGINAL” Bidders not complying with the requirements of the Bid Form and the submission and delivery of the bids may be deemed non-responsive to the Invitation to Tender and their bids may be excluded from further consideration. The Bidders should submit the bids which should be signed by Authorized person of the company and company may verify if it is required from CEO or Owner of bidder or any other Agencies e.g. Chamber of Commerce. . No deletions or erasures may be made in the list of prices and the schedule of categories. Any correction in the prices etc. shall be re-written in numbers and words and signed by the authorized person. The bidder may not delete or modify any clauses or technical specifications irrespective of the nature of such modification. Any special conditions or modifications shall be sent in or attached with a separate letter kept in the tender envelope. A reference shall be made to this letter in the bid itself. No other alternative shall be acceptable. The price schedule shall specify whether the item is manufactured in the Sultanate of Oman or abroad. Inaccuracy of the information submitted, partly or fully, shall lead to the rejection of the item without prejudice to the Abraj Tender Committee’s right to deprive the bidder of the facility to deal with other tenders of the Company within a period specified by the relevant Abraj Tender Committee (ATC), depending on the situation of each case. The prices quoted by the bidder in the schedule of categories shall include and cover all the expenses and liabilities, irrespective of their nature, to be incurred or met in respect of each clause and shall also include those involved in the completion, delivery and maintenance if required, of all the works during the period of guarantee and maintenance. The final calculation shall be done on the basis of these prices irrespective of fluctuations in the market, the customs duty and other duties and taxes. The bidder shall, in case of the submission of one or more alternative offer, ensure that these offers are clear and detailed and referred to in the list of contents. If the bidder fails to specify the price of an item required to be supplied in the price list, this shall be considered as abstention from participation in the tender in respect of such item. The prices specified in words shall be accepted. As an exception, the relevant may accept the offer specified in numbers only in the Company’s interest. A bid based on a reduction in the lowest bid by a specified percentage shall also not be acceptable. To submit the Commercial bid, the following shall be taken into account: a. If the goods are required to be delivered on board the ship, the price given in the bid shall include the price of the items, adding thereto the expenses for mobilization, transportation and loading in accordance with the FOB system. b. If the goods are required to be delivered at the port of arrival, the price given in the bid shall include the price of the items, adding thereto the expenses for mobilization, transportation, loading and shipping in accordance with the C & F system. c. If the goods are required to be delivered at the port of arrival, the price given in the bid shall include the price of the items, adding thereto the expenses for mobilization, transportation, loading, shipping, insurance and unloading in accordance with the CIF system. d. If the goods are required to be delivered at the stores of the purchaser or the work sites, the price given in the bid shall include the price of the items, adding thereto the expenses for mobilization, transportation and loading, the shipment charges, the insurance cost and expenses on unloading, customs duties, internal transportation and other additional charges. e. In all cases, the contractor shall bear all the expenses for getting the letter of credit from the Company pertaining to their banker while the Company shall bear the letter of credit opening charges pertaining to its banker in Oman. f. The data or information for Commercial Bid submission will be as per attached Annexure-10. Bidders accept full responsibility for ensuring their bids are delivered or submitted to the correct email address by the specified deadline. Bids submitted to any other address or later than the deadline may not be considered. Bidders forwarding their bids by courier should advise by email to Xxxxxxxx@xxxxxxxxxxx.xxx , when the bid has been sent by courier, naming the courier and tracing number. Bids received after the final bid submission deadline will be returned unopened to the bidder. Company expressly reserves the right to extend the bid submission deadline. You have to forward your offer in soft copy addressed to the Senior Tender Committee to the mail ID: Xxxxxx.XXX@xxxxxxxxxxx.xxx on or before official Bid closing date.

  • Time Limits for Submission of Claim Failure by Purchaser to submit a Claim within established time limits shall relinquish the United States from any and all obligations whatsoever arising under the contract or portions thereof. Purchaser shall file such Claim within the following time limits: (a) When Purchaser constructs Specified Road, Pur- chaser must file any Claim not later than 60 days after re- ceipt of Forest Service written notification of acceptance; (b) When Forest Service constructs Specified Road, Purchaser must file any Claim not later than 60 days after receipt of Forest Service written notification authorizing use of road; (c) For subdivisions or cutting units, Purchaser must file any Claim not later than 60 days after receipt of Forest Service written notification that subdivision or cutting unit has been accepted; and (d) In all other cases, Purchaser must file any Claim not later than 60 days after receipt of Contracting Officer written notification that timber sale is closed.

  • SUBMISSION OF BID Bids may be submitted via the electronic submission portal at: xxxxx://xxx.xxxxxxxxxx.xxx/buyer/691, or in the Procurement Division; Internal Operations Centre II, 000 X. Xxxxx Xxxxxx; 0xx Xxxxx, Xxxxxxx, XX 00000, prior to the submission deadline. Bids will be opened per the public meeting notice. If bid will be mailed or hand delivered, ensure it is secured in a sealed envelope, addressed as follows: A. Invitation for Bids Number B. Due Date of Bid Submittal C. Name of Bidder

  • Requests for Swing Loans Borrower shall give Administrative Agent prior notice (which may be written or oral) no later than 12:00 Noon on the date upon which Borrower requests that any Swing Loan be made, of the amount and date of such Swing Loan, and, if applicable, the Interest Period requested therefor. Administrative Agent shall promptly advise the Swing Line Lender of any such notice received from Borrower. After receiving such notice, the Swing Line Lender shall in its discretion quote an interest rate to Borrower at which the Swing Line Lender would be willing to make such Swing Loan available to Borrower for the Interest Period so requested (the rate so quoted for a given Interest Period being herein referred to as “Swing Line Lender’s Quoted Rate”). Borrower acknowledges and agrees that the interest rate quote is given for immediate and irrevocable acceptance. If Borrower does not so immediately accept the Swing Line Lender’s Quoted Rate for the full amount requested by Borrower for such Swing Loan, the Swing Line Lender’s Quoted Rate shall be deemed immediately withdrawn and such Swing Loan shall bear interest at the rate per annum determined by adding the Applicable Margin for Base Rate Loans under the Revolving Credit to the Base Rate as from time to time in effect. Subject to the terms and conditions hereof, the proceeds of each Swing Loan extended to Borrower shall be deposited or otherwise wire transferred to Borrower’s Designated Disbursement Account or as Borrower, Administrative Agent, and the Swing Line Lender may otherwise agree. Anything contained in the foregoing to the contrary notwithstanding, the undertaking of the Swing Line Lender to make Swing Loans shall be subject to all of the terms and conditions of this Agreement (provided that the Swing Line Lender shall be entitled to assume that the conditions precedent to an advance of any Swing Loan have been satisfied unless notified to the contrary by Administrative Agent or the Required Lenders).

  • SUBMISSION OF TENDERS i. The tenders received after the specified time of their submission shall be treated as `Late Tenders’ and shall not be considered under any circumstances. xx. Xxxxxxx shall be opened by authorized officer at his office at the time and date as specified in the NIT, in the presence of such of those tenderers or their authorized representatives who may be present. iii. Tenders whose bids are found techno-commercially qualified shall be informed by E-mail the date and time of opening of the Bids. XXXX’s decision in this regard shall be final and binding. iv. Before submission of Bid, the tenderers are advised to inspect the site of work and the environments and be well acquainted with the actual working and other prevalent conditions, facilities available, position of material and labour, means of transport and access to Site, accommodation, etc. No claim will be entertained later on the grounds of lack of knowledge of any of these conditions.

  • Rejection of Bids 22.1. The ACCO may reject a Bid if: 22.1.1. The Bidder is determined to be not responsible pursuant to the PPB Rules; or if 22.1.2. The Bid is determined to be non-responsive pursuant to the PPB Rules; or if 22.1.3. Any of the Bid prices for lump sum or unit items are significantly unbalanced to the potential detriment of NYCDOT. An unbalanced Bid is considered to be a Bid containing lump sum or unit item prices which do not reflect reasonable actual costs plus a reasonable proportionate share of the Bidder’s anticipated profit, overhead costs and other indirect costs anticipated for the performance of the item in question. 22.2. The ACCO may reject all Bids and may elect to re-solicit by bid or by other method authorized by the PPB Rules.

  • Submission of Grievances A. Any employee or group of employees shall have the right to present a grievance. No employee or group of employees shall be hindered from or disciplined for exercising this right. B. If any two (2) or more employees have essentially the same grievance they may, and if requested by the County must, collectively present and pursue their grievance if they report to the same immediate supervisor. C. If the grievant is a group of more than three (3) employees, the group shall, at the request of the County, appoint one (1) or two (2) employees to speak for the collective group. To be considered a grievant in a group grievance, each employee must be individually identified as a grievant when the grievance is submitted at Step 2.

  • BID SUBMISSION All Bids are to be packaged, sealed and submitted to the location stated in the Bid Specifications. Bidders are solely responsible for timely delivery of their Bids to the location set forth in the Bid Specifications prior to the stated Bid opening date/time. A Bid return envelope, if provided with the Bid Specifications, should be used with the Bid sealed inside. If the Bid response does not fit into the envelope, the Bid envelope should be attached to the outside of the sealed box or package with the Bid inside. If using a commercial delivery company that requires use of their shipping package or envelope, Bidder’s sealed Bid, labeled as detailed below, should be placed within the shipper’s sealed envelope to ensure that the Bid is not prematurely opened. All Bids must have a label on the outside of the package or shipping container outlining the following information: “BID ENCLOSED (bold print, all capitals) • Group Number • IFB or RFP Number • Bid Submission date and time” In the event that a Bidder fails to provide such information on the return Bid envelope or shipping material, the receiving entity reserves the right to open the shipping package or envelope to determine the proper Bid number or Product group, and the date and time of Bid opening. Bidder shall have no claim against the receiving entity arising from such opening and such opening shall not affect the validity of the Bid or the procurement. Notwithstanding the receiving agency’s right to open a Bid to ascertain the foregoing information, Bidder assumes all risk of late delivery associated with the Bid not being identified, packaged or labeled in accordance with the foregoing requirements. All Bids must be signed by a person authorized to commit the Bidder to the terms of the Bid Documents and the content of the Bid (offer).

  • Submission of Tender The tender shall be submitted online in two part, viz., technical bid and financial bid. All the pages of bid being submitted must be signed and sequentially numbered by the bidder irrespective of nature of content of the documents before uploading.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!