Dispatch Method Sample Clauses

Dispatch Method automated via cloud control, or other (Seller shall provide a description)
AutoNDA by SimpleDocs
Dispatch Method. Sleeper cab operations shall be between the designated home terminal and a designated area and/or a destination terminal unless otherwise agreed. The A, B, C, dispatch principle shall apply. All regular sleeper runs shall be posted for bid once each six (6) months unless otherwise agreed. The number of regular runs or teams in designated areas shall be determined by taking fifty percent (50%) of the average number of runs operated by sleeper teams between two (2) or more designated points for a period of six (6) months. Disputes over bids will be referred to the Sleeper Resolution Committee. The sleeper trip must equal a minimum of thirteen hundred (1300) paid miles. All sleeper trips are limited to one via on the return home dispatch, (B-A), (C-A), unless otherwise mutually agreed or as approved by the appropriate committee. All sleeper teams must be sent to their home terminal on the third dispatch unless otherwise mutually agreed.
Dispatch Method. Sleeper cab operations shall be between the designated home termi- nal and a designated area and/or a destination terminal unless oth- erwise agreed. The A, B, C, dispatch principle shall apply. All regular sleeper runs shall be posted for bid once each six (6) months unless otherwise agreed. The number of regular runs or teams in designated areas shall be determined by taking fifty per- cent (50%) of the average number of runs operated by sleeper teams between two (2) or more designated points for a period of six
Dispatch Method. Sleeper cab operations shall be between the designated home termi- nal and a designated area and/or a destination terminal unless oth- erwise agreed. The A, B, C, dispatch principle shall apply.
Dispatch Method. Sleeper cab operations shall be between the designated home termi- nal and a designated area and/or a destination terminal unless oth- erwise agreed. The A, B, C, dispatch principle shall apply. All regular sleeper runs shall be posted for bid once each six (6) months unless otherwise agreed. The number of regular runs or teams in designated areas shall be determined by taking fifty per- cent (50%) of the average number of runs operated by sleeper teams between two (2) or more designated points for a period of six (6) months. Disputes over bids will be referred to the Sleeper Resolution Committee. The sleeper trip must equal a minimum of thirteen hundred (1300) paid miles. All sleeper trips are limited to one via on the return home dispatch, (B-A), (C-A), unless otherwise mutually agreed or as approved by the appropriate committee.

Related to Dispatch Method

  • Billing Method 2.6.1 To receive payment for services rendered pursuant to this contract the Contractor shall submit a fully completed invoice for work previously performed to: 2.6.2 At a minimum, the invoice shall detail the following information: 2.6.2.1 Unique invoice number; 2.6.2.2 Contractor’s name, address, and telephone number; 2.6.2.3 Date of invoice and/or billing period; 2.6.2.4 Applicable Contract No.;

  • Dispatch The Power Project shall be required to maintain compliance to the applicable Grid Code requirements and directions, if any, as specified by concerned SLDC/RLDC from time to time.

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • Dispatching 1. Dispatchers will schedule and assign drivers and vehicles in accordance with the trips scheduled for each day; 2. Dispatchers will assist drivers while they are in service to carry out the assigned trips on time by providing address assistance and telephoning passengers as needed. 3. Dispatchers will monitor the performance of scheduled trips, reassigning trips and/or adjusting the number of vehicles in service as needed to ensure on-time performance in the most efficient manner. 4. Dispatchers will provide continuous monitoring of assigned radio frequencies during all hours that vehicles are in service, answer and respond to telephone calls on the Ride Status line, and respond to calls from drivers and OoA staff.

  • Procurement Method Quality-Based Selection (b) Selection under a Fixed Budget

  • PayPal as Login Method We may allow you to authenticate with PayPal when you log into certain external websites or mobile apps. If we do so, we may share your login status with any third party enabling you to log in in this way, as well as the personal and other account information that you consent to being shared so that the third party can recognize you. PayPal will not give the third party access to your account and will only make payments from your account to that third party with your specific authorization and instruction.

  • Measurement method An isolation resistance test instrument is connected between the live parts and the electrical chassis. The isolation resistance is subsequently measured by applying a DC voltage at least half of the working voltage of the high voltage bus. If the system has several voltage ranges (e.g. because of boost converter) in conductively connected circuit and some of the components cannot withstand the working voltage of the entire circuit, the isolation resistance between those components and the electrical chassis can be measured separately by applying at least half of their own working voltage with those components disconnected.

  • Construction Methods 3.1 The Contractor shall provide all tools, equipment, materials, labor and work for the excavation and removal of the unsuitable subgrade soils and their subsequent replacement with the specified backfill soils as directed by the Owner’s representative. All work under this item shall be performed in a safe and workmanlike manner. 3.2 All work shall be performed in accordance with DelDOT Standard Specifications Section 821. 3.3 Following the removal of existing pavements, the Owner’s representative will review the exposed subgrade and provide recommendations for the undercutting of unsuitable subgrade materials as required. The depth and extent of undercut excavation, if required, will be determined by the Owner’s representative at the time of excavation. 3.4 All excavated materials shall become the property of the Contractor and be removed from the site at the completion of the project at no additional expense to the Owner. 3.5 Undercut excavations should be backfilled with graded aggregate. Backfill shall be placed in loose lifts not exceeding 8 inches thick. Each lift should be compacted with at least 3 passes of a minimum 5-ton, walk-behind or self-propelled vibratory roller when the size of the area permits, or with a vibrating plate mechanical compactor for smaller areas. Lift thickness shall be reduced to 6 inch loose lift when using a vibratory plate compactor. 3.6 The Contractor shall take precautions as necessary to minimize the potential for disturbance or softening of the pavement subgrade materials from inclement weather or construction traffic. As a minimum, this shall include the placement of backfill on the same day as the excavation. Any soft areas which develop shall be undercut and replaced with graded aggregate at no additional cost to the Owner. 3.7 Where undercutting is performed, the geotextile fabric shall be installed. The fabric should be pulled tight and lapped a minimum of 12 inches.

  • Test method This test is intended to demonstrate the immunity of the vehicle electronic systems. The vehicle shall be subject to electromagnetic fields as described in this annex. The vehicle shall be monitored during the tests. If not otherwise stated in this annex the test shall be performed according to ISO 11451-2.

  • Allocation Method (Choose one of a. or b.): a. [ ] All the same. Using the same allocation method as applies to the Signatory Employer under this Election 28. b. [ ] At least one different. Under the following allocation method(s): .

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!