DSD Sample Clauses

DSD. The City’s Development Services Department, or any successor City department carrying out similar functions on the City’s behalf.
Sample 1Sample 2
AutoNDA by SimpleDocs
DSD. Merchandise does not include products that as of the date hereof, or in the future pursuant to this Section 1.2(a), are supplied by direct store delivery (“DSD”) vendors, including, but not limited to the list of DSD vendors attached hereto as Schedule 1.2(a), which are providing products to BWD as of the date hereof. Nothing in this Agreement shall prohibit or otherwise limit BWD’s ability to substitute a DSD vendor with a vendor of the same or similar DSD items, or to purchase any item that is available through DSD only and not available through C&S. BWD may convert [***] that are procured by C&S and carried in the Facilities to DSD. If: (x) BWD would like to have an item of C&S-supplied Merchandise become a DSD item; or (y) C&S would like to convert DSD items to warehouse delivery, then in accordance with Section 3.9(a) (Best Intentions), the Parties shall meet and discuss an appropriate adjustment of the [***] resulting from such conversion, to the extent applicable. To the extent an item of C&S-supplied Merchandise is converted to DSD, [***]. If BWD requests to convert an item to DSD for a special distribution [***] then BWD will pay [***] Notwithstanding the foregoing, BWD will not be required to pay such [***] fee if [***].
Sample 1
DSD. During the Term, McKesson agrees to sell, supply and deliver to Rite Aid, upon Rite Aid's Orders therefor from time to time, and Rite Aid agrees to purchase from McKesson (subject to paragraph (c) below), only for the purpose of dispensing by Rite Aid, upon the terms and subject to the conditions of this Agreement, all of Rite Aid's requirements for Rx Products for Rite Aid purchases for DSD that are not supplied to Rite Aid stores from Rite Aid warehouses.
Sample 1
DSD. The EDI Invoice Price for all Contract Products purchased DSD will be the [ ] The EDI Invoice Price for such Contract Products shall be determined as of the time of McKesson's issuance of a Store Invoice for such Product, which invoice shall be issued no later than the DSD Scheduled Delivery Date for that Product at such Rite Aid store.
Sample 1
DSD. Rite Aid stores may place Orders for Products for DSD at any time and from time to time. For every Product that is ordered by Rite Aid for DSD that McKesson repackages or contracts to repackage, McKesson shall automatically substitute such repackaged Product for the Product ordered. In the event that McKesson is out of stock of such repackaged Product, McKesson shall automatically substitute the manufacturer's original package.
Sample 1
DSD. Unless Rite Aid elects to pay EDI Invoices under the accelerated weekly payment incentive program under Section 3.2(b)(iv), EDI Invoices for store deliveries of Products for DSD shall be due and payable as follows: (a) on the [ ] of each month, with respect to EDI Invoices containing DSD Invoice Dates from the 1st to the 15th day of the month, inclusive, and (b) on the [ ] of the following month, with respect to EDI Invoices containing DSD Invoice Dates from the 16th to the end of the month, inclusive, but in no event sooner than [ ] after receipt of the EDI Invoices by Rite Aid.
Sample 1

Related to DSD

  • The Business The parties acknowledge that the Company is engaged in the development, marketing and sale of certain proprietary technologies, processes and related products in the areas of chemical detection, technical processes, and technical/business services, and that the Company may also from time to time become or may intend to become engaged in other business endeavors (individually and collectively, the "BUSINESS"). The Company shall be deemed to intend to become engaged in a business endeavor if it has devoted or expended any significant resources, either financial or human resources, towards the proposed endeavor, either in planning or implementing the undertaking of such planned endeavor.

  • Assumed Business Names Borrower has filed or recorded all documents or filings required by law relating to all assumed business names used by Borrower. Excluding the name of Borrower, the following is a complete list of all assumed business names under which Borrower does business: None.

  • Customers and Suppliers (a) Neither the Company nor any Subsidiary has any outstanding material disputes concerning its products and/or services with any customer or distributor who, in the year ended September 30, 2009 or the six (6) months ended March 31, 2010, was one of the ten (10) largest sources of revenues for the Company and its Subsidiaries, based on amounts paid or payable (each, a “Significant Customer”), and the Company has not received any written notice of any material dissatisfaction on the part of any Significant Customer. Each Significant Customer is listed in Schedule 2.22(a) of the Company Disclosure Letter. Neither the Company nor any of its Subsidiaries has received any information from any Significant Customer that such Significant Customer will not continue as a customer of the Company as wholly-owned by the Acquiror or such Subsidiary, after the Closing or that such Significant Customer intends to terminate or materially modify existing Contracts with the Company as wholly-owned by the Acquiror or such Subsidiary. The Company has not had any of its products returned by a purchaser thereof except for normal warranty returns consistent with past history and those returns that would not have a Material Adverse Effect on the Company and its Subsidiaries, taken as a whole. (b) All Company Products sold, licensed, leased or delivered by the Company or any Subsidiary to customers and all services provided by or through the Company or any Subsidiary to customers on or prior to the Closing Date conform in all material respects to applicable contractual commitments, express and implied warranties (to the extent not subject to legally effective express exclusions thereof), and conform in all material respects to packaging, advertising and marketing materials and to applicable product or service specifications or documentation. Neither the Company nor any Subsidiary has any Liability (and, to the knowledge of the Company, there is no legitimate basis for any present or future action, suit, proceeding, hearing, investigation, charge, complaint, claim or demand against the Company or any Subsidiary giving rise to any material Liability relating to the foregoing Contracts) for replacement or repair thereof or other damages in connection therewith in excess of any reserves therefor reflected on the Company Balance Sheet. (c) Neither the Company nor any Subsidiary has any outstanding material dispute concerning products and/or services provided by any supplier who, in the year ended September 30, 2009 or the six (6) months ended March 31, 2010, was one of the ten (10) largest suppliers of products and/or services to the Company and its Subsidiaries, based on amounts paid or payable (each, a “Significant Supplier”), and the Company has no knowledge of any material dissatisfaction on the part of any Significant Supplier. Each Significant Supplier is listed in Schedule 2.22(c) of the Company Disclosure Letter. Other than as set forth in Schedule 2.22(c) of the Company Disclosure Letter, neither the Company nor any of its Subsidiaries has received any information that any such Significant Supplier will not continue as a supplier to the Company as wholly-owned by the Acquiror or such Subsidiary after the Closing or that such Significant Supplier intends to terminate or materially modify existing Contracts with the Company as wholly-owned by the Acquiror or such Subsidiary. The Company and its Subsidiaries have access, on commercially reasonable terms, to all products and services reasonably necessary to carry on their respective businesses, and the Company has no knowledge of any reason why they will not continue to have such access on commercially reasonable terms.

  • Purchased Services During the term of this Collective Agreement, no regular employee will be declared surplus in his/her position as a result of the use of purchased services to perform the work normally performed by that employee.

  • Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group. 5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise. 5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.

  • Supplier’s Staff 3.3.1 Access to the Premises shall be limited to such Staff and the Supplier’s suppliers as are necessary for the Supplier to fulfil its obligations under the Contract. The Supplier shall co-operate with others working on the Premises to such extent as the Authority may reasonably require. 3.3.2 The Authority reserves the right to refuse to admit to, or to withdraw permission to remain on, the Premises:- (a) for any member of the Staff; or (b) for any person employed or engaged by any member of the Staff, whose admission or continued presence would be, in the reasonable opinion of the Authority, undesirable. 3.3.3 At the Authority’s written request, the Supplier shall provide a list of the names and business addresses of all persons who may require admission in connection with the Contract to the Premises, specifying the capacities in which they are concerned with the Contract and giving such other particulars as the Authority may reasonably request. 3.3.4 The Supplier’s Staff, engaged within the boundaries of the Premises, shall comply with such rules, regulations and requirements (including those relating to security arrangements) as may be in force from time to time for the conduct of personnel when at or outside those premises. 3.3.5 If the Supplier fails to comply with Clause 3.3.3 within one (1) Month of the date of the request and in the reasonable opinion of the Authority, such failure may be prejudicial to the interests of the Crown, then the Authority may terminate the Contract, provided always that such termination shall not prejudice or affect any right of action or remedy which shall have accrued or shall thereafter accrue to the Authority. 3.3.6 The decision of the Authority as to whether any person is to be refused access to the Premises and as to whether the Supplier has failed to comply with Clause 3.3.3 shall be final and conclusive.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • DELIVERY, STORAGE, AND HANDLING The Contractor shall be responsible to inspect all components on delivery to ensure that no damage occurred during shipping or handling for furnish and installation projects. For equipment only purchases, the ordering entity shall be responsible to inspect all components on delivery. Materials must be stored in original undamaged packaging in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism, and theft until ready for installation.

  • Contact with Customers and Suppliers Until the Closing Date, the Buyer shall not, and shall cause its Affiliates and direct its other Representatives not to, contact or communicate with the employees, customers, suppliers, distributors or licensors of the Acquired Entities, or any other Persons having a business relationship with the Acquired Entities, concerning the transactions contemplated hereby or any of the foregoing relationships without the prior written consent of the Seller.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!