TRAINING AND RELATED MATTERS The parties recognise that in order to increase the efficiency and productivity of the company a significant commitment to structured training and skill development is required. Accordingly the parties commit themselves to:
a) The parties to this Agreement recognise the importance of the apprenticeship system to the construction industry. It is agreed that every employer party to this Agreement who employs five (5) or more tradespersons in any one classification shall undertake to employ at least one (1) apprentice or make arrangements to host an apprentice from an agreed group apprenticeship scheme. Where an employer does not currently have an apprentice as per this provision, reasonable time shall be allowed to enable the employer to comply with this clause. Further, the parties are committed to a strong ratio of apprentices in the industry. Apprenticeship levels on a specific project may be discussed at the Project Pre-Commencement Conference (refer Clause 16).
b) Providing employees with the opportunity to acquire additional skills within relevant career path structures through appropriate structured training based on nationally endorsed (i.e. Construction Training Australia endorsed) competency standards and curriculum;
c) Actively encouraging employees to seek formal recognition of their skills (i.e. recognition of prior learning); and
d) Using training providers accredited and acceptable to the parties. The CFMEU, MBAV and other employer associations are legitimately engaged in providing training to industry and it is hereby agreed that all parties will properly recognise and accept the validity of nationally accredited training as provided by the other parties.
e) The parties will consult on the development of training programs which are consistent with the following: • Training provided will be consistent with the company’s business requirements, relevant to the work of the employees, consistent with the skills development of each employee and with applicable national competency standards. • Training may be taken either on or off the job with all reasonable steps being taken to conduct training in normal working hours. • If an approved training activity is undertaken during ordinary working hours, the employee/s concerned shall not suffer any loss of pay. • Approved training activities undertaken outside of ordinary hours will be paid at single time or will, at the employee’s option, be taken as time off in lieu of payment. Provided that the scheduling of time off must be consistent with the needs of the business and be by agreement with the company. • Training costs of courses approved by the company will be met by the company. • The company will not be asked to meet the costs of training undertaken by employees which was not approved by the company. • Leave of absence granted pursuant to this clause shall count as service for all purposes of the award and this agreement. • Accredited members of the union will be allowed up to 5 days per year, without loss of pay, to attend trade union educational courses conducted or approved by the union. (see appendix H)
f) The parties to this Agreement recognise the importance of the role that Apprentices/Trainees fulfill within the industry and, more importantly, a role that they will fulfill as trades persons following the conclusion of the indentures. To this end the Victorian Building Industry Consultative Committee will investigate ways of enhancing employment prospects for Apprentice/Trainees. In addition it is agreed that, where appropriate, employers will use their best endeavours to employ Apprentices/Trainees in order to ensure appropriate trade persons levels for the future.
LAYOFFS AND RECALLS (a) Employees will be laid off in reverse order of seniority whenever there is a reduction of employees in the bargaining unit. The only exception to this provision is when the client requests in writing that a specific security guard be retained at their site. Guards can bump due to (1) loss of site, (2) being bumped by a senior guard, (3) client removal for non-disciplinary reasons, (4) return from approved leave of absence or (5) loss of position on a site.
(b) The Company shall notify employees whose position is to be eliminated due to the loss of work at a specific site or the loss of the entire site at least five (5) working days prior to the effective date of termination of the position. Such employee will be entitled to bump junior employees at other sites in order to maintain employment and status. The company will meet with the affected employee and their Union representative as quickly as possible after notification in order to allow the employee to review options and make an informed decision where they wish to bump into. The parties will attempt to place the security guard into an alternate site where said guard will not lose any days of pay, but in no event, will the placement, or bumping take more than five (5) working days (no more than five (5) unpaid days). If an employee is not slotted into their new position within said five (5) working days, the company will provide payment in lieu of work. During the up to five (5) days waiting period, the employee will be entitled to be on top of the spare board list if they so desire.
(c) The Company shall generally give notice of recall by registered mail to the last recorded address of the employee. The employee shall keep the Company informed of the employee's present address of location where he may be reached. The employee who fails to do so shall forfeit his right of recall.
(d) If, within one (1) calendar day from the receipt of such notice, the employee accepts the recall, the job will be held open for one (1) calendar day from the day of the employee's acceptance. In the event that such recalled employee is employed elsewhere at the time of recall, the Company will hold the position vacant for two (2) weeks if the Company has received appropriate advance notice from its client.
(e) In circumstances where the Company must fill vacant positions without delay, the Company shall give notice of recall by telephone until able to find a qualified employee who is prepared to report to work immediately.
(f) If the employee declines the position, or fails to respond to the notice within one (1) calendar day from the date of receipt of the original notice, or fails to report to work within the time period outlined above, such employee shall be considered to have resigned and shall forfeit his recall rights. Should such employee be prevented from returning to work due to illness or accident he shall retain his recall rights and the Company shall be at liberty to recall another employee. The employee shall be required to show proof of such illness or accident.
Subsidies 1. A Party which considers that it is adversely affected by a subsidy of another Party may request ad hoc consultations with that Party on such matters. The requested Party shall enter into such consultations.
2. The Parties shall review any disciplines agreed under Article XV of the GATS with a view to incorporating them into this Chapter.
Felling and Bucking Felling shall be done to minimize breakage of Included Timber and dam- age to residual timber. Unless agreed otherwise, felling shall be done by saws or shears. Bucking shall be done to permit removal of all minimum pieces set forth in A2. B6.411 Felling in Clearings. Insofar as ground conditions, tree lean, and shape of clearings per- mit, trees shall be felled so that their tops do not extend outside Clearcutting Units, construction clearings, and ar- eas of regeneration cutting. B6.000 Xxxxx Xxxxxxx. Stumps shall not exceed, on the side adjacent to the highest ground, the maximum heights set forth in A6, except that occasional stumps of greater heights are acceptable when Purchaser determines that they are necessary for safe and efficient conduct of logging. Unless otherwise agreed, Purchaser shall re-cut high stumps so they will not exceed heights specified in A6 and shall dispose of severed portions in the same manner as other logging debris. The xxxxx heights shown in A6 were selected with the objective of maximum reasonable utilization of the timber, unless Sale Area Map shows special areas where xxxxx heights are lower for aesthetic, land treatment, or silvicultural rea- sons.
Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.
LAYOFFS AND RECALL 16.01 It is not the intent of these lay-off and recall procedures to apply to the normal summer period. However, where known, recall dates of ten (10) month employees shall be indicated on the Separation Certificate issued by the Employer.
16.02 In the event of lay-off, employees shall be laid off in reverse order of their seniority provided that those persons retained have the necessary skills, qualifications, and ability to perform the duties of those jobs maintained.
a) In order to minimize the potentially disruptive nature of an Educational Assistant lay-off during the school year, an Educational Assistant who has received a lay-off notice during the school year may elect to:
i) Accept the lay-off and be recalled under the terms of the Collective Agreement or;
ii) Displace the most junior permanent Educational Assistant in the Division.
b) Where there are Educational Assistants who are on lay-off or who are laid off at the end of June, and there will not be sufficient positions in September for them all to be recalled, then the Employer will lay-off a sufficient number of the most junior Educational Assistants so as to enable the more senior Educational Assistants to be recalled in September.
c) Educational Assistants who receive a lay-off notice must declare their intention to displace a junior Educational Assistant within the first five (5) working days of receipt of the lay-off notice. It is agreed between the parties that failure to do so will mean that the Educational Assistant accepts lay-off at the end of the notice period.
16.03 Employees shall be recalled in order of their seniority provided that the person recalled has the necessary skills, qualifications, and ability to perform the duties of the job.
16.04 New employees shall not be hired if there are employees on lay-off with the necessary skills, qualifications, and ability to perform the work.
16.05 In the event of lay-off, every employee affected shall be given four (4) weeks’ notice before the date on which she is to be laid off, and to the extent that such minimum notice is not given, the employee shall receive pay in lieu thereof.
16.06 Grievances concerning lay-offs and recalls shall be initiated at Step II of the grievance procedure.
16.07 Notwithstanding the provisions of Article 15.01, an Educational Assistant who normally works twenty-seven and one-half (27 ½) or more hours per week, and whose hours of work have been unilaterally reduced during the school year, shall, at the Educational Assistant’s option, be deemed to have been laid off. An Educational Assistant accepting a position having fewer hours than their normal working day will be given primary consideration upon application when new positions become available having comparable hours.
16.08 All Educational Assistants laid off shall be placed on a recall list, with copy furnished to the Union, and shall be called back to work as required beginning with the most senior Educational Assistant and descending from there.
16.09 No Educational Assistant shall be permitted to have her name remain on the recall list in excess of twelve (12) school months following the month in which the layoff occurred.
Advertising and Publicity No Credit Party shall issue or disseminate to the public (by advertisement, including without limitation any “tombstone” advertisement, press release or otherwise), submit for publication or otherwise cause or seek to publish any information describing the credit or other financial accommodations made available by the Lenders pursuant to this Agreement and the other Loan Documents without the prior written consent of the Administrative Agent. Nothing in the foregoing shall be construed to prohibit any Credit Party from making any submission or filing which it is required to make by applicable law or pursuant to judicial process; provided, that, (i) such filing or submission shall contain only such information as is necessary to comply with applicable law or judicial process and (ii) unless specifically prohibited by applicable law or court order, the Borrower shall promptly notify the Administrative Agent of the requirement to make such submission or filing and provide the Administrative Agent with a copy thereof.
Training and Orientation (a) No employee shall be required to work on any job or operate any piece of equipment until he/she has received proper training and instruction.
(b) The Employer shall provide sufficient and adequate training and/or orientation to any employee working in a new or unfamiliar work area or position.
Training and Support Licensor shall offer installation support to the Licensee and each of the Members, including assisting with the implementation of any Licensor software. Licensor will provide appropriate training to Licensee and Member staff relating to the use of the Licensed Materials and any Licensor software. Licensor will offer reasonable levels of continuing support to assist Licensee and Members in use of the Licensed Materials, including providing help files and other appropriate user documentation in connection with the use of and access to Licensed Materials. Licensor will, at a minimum, make its personnel available by email, telephone or via the Web, or in person during Licensor’s regular business hours, Monday through Friday, for training and user access support.
Department of Housing and Urban Development Iowa Civil Rights Commission 000 Xxxx 00xx Xxxxxx
