Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.
Unbundled Sub-Loop Feeder 2.8.4.1 Unbundled Sub-Loop Feeder (USLF) provides connectivity between BellSouth's central office and cross-box (or other access point) that serves an end user location.
2.8.4.2 USLF utilized for voice traffic can be configured as 2-wire voice (USLF-2W/V) or 4-wire voice (USLF-4W/V).
2.8.4.3 USLF utilized for digital traffic can be configured as 2-wire ISDN (USLF-2W/I); 2-wire Copper (USLF-2W/C); 4-wire Copper (USLF-4W/C); 4-wire DS0 level loop (USLF-4W/D0); or 4-wire DS1 and ISDN (USLF-4W/DI).
2.8.4.4 USLF will provide access to both the equipment and the features in the BellSouth central office and BellSouth cross box necessary to provide a 2W or 4W communications pathway from the BellSouth central office to the BellSouth cross- box. This element will allow for the connection of Lightyear’s loop distribution elements onto BellSouth's feeder system.
Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Company Subsidiaries; Equity Interests (a) The Company Disclosure Letter lists each Company Subsidiary and its jurisdiction of organization. Except as specified in the Company Disclosure Letter, all the outstanding shares of capital stock or equity investments of each Company Subsidiary have been validly issued and are fully paid and nonassessable and are as of the date of this Agreement owned by the Company, by another Company Subsidiary or by the Company and another Company Subsidiary, free and clear of all Liens.
(b) Except for its interests in the Company Subsidiaries, the Company does not as of the date of this Agreement own, directly or indirectly, any capital stock, membership interest, partnership interest, joint venture interest or other equity interest in any person.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Unbundled Sub-Loop Distribution Voice Grade (USLD-VG) is a copper sub- loop facility from the cross-box in the field up to and including the point of demarcation at the End User’s premises and may have load coils.
SUB-CONTRACTS (a) The Administrator may sub-contract or delegate the performance of all or any of its powers and obligations under this Agreement, provided that (but subject to Clause 3.2(b) herein):
(i) the prior written consent of the Mortgages Trustee and Funding to the proposed arrangement (including, if Funding considers it necessary after consulting with the Security Trustee, approving any contract which sets out the terms on which such arrangements are to be made) has been obtained, the Security Trustee has been consulted and notification has been given to each of the Rating Agencies;
(ii) where the arrangements involve the custody or control of any Mortgage Loan Files and/or Title Deeds relating to the Mortgage Portfolio for the purpose of performing any delegated Services, the sub-contractor or delegate has executed an acknowledgement in writing acceptable to Funding and the Security Trustee to the effect that any such Mortgage Loan Files and/or Title Deeds are and will be held to the order of the Mortgages Trustee (as trustee for the Beneficiaries);
(iii) where the arrangements involve or may involve the receipt by the sub-contractor or delegate of monies belonging to the Beneficiaries which, in accordance with this Agreement, are to be paid into the relevant Collection Account, the sub-contractor or delegate has executed a declaration in writing acceptable to the Beneficiaries that any such monies held by it or to its order are held on trust for the Beneficiaries and will be paid forthwith into the relevant Collection Account in accordance with the terms of the Mortgages Trust Deed;
(iv) any such sub-contractor or delegate has executed a written waiver of any Security Interest arising in connection with such delegated Services (to the extent that such Security Interest relates to the Mortgage Portfolio or any amount referred to in (iii) above); and
(v) neither the Mortgages Trustee, the Security Trustee nor the Beneficiaries shall have any liability for any costs, charges or expenses payable to or incurred by such sub-contractor or delegate or arising from the entering into, the continuance or the termination of any such arrangement.
(b) The provisos to Clause 3.2(a) (i), (ii) and (iii) herein shall not apply:
(i) to the engagement by the Administrator of:
(1) any receiver, solicitor, insurance broker, valuer, surveyor, accountant, estate agent, insolvency practitioner, auctioneer, bailiff, debt counsellor, tracing agent, property management agent, licensed or qualified conveyancer or other professional adviser acting as such; or
(2) any locksmith, builder or other contractor acting as such in relation to a Mortgaged Property, in any such case being a person or persons whom the Administrator would be willing to appoint in respect of its own mortgages in connection with the performance by the Administrator of any of its obligations or functions or in connection with the exercise of its powers under this Agreement; or
(ii) to any delegation to any wholly-owned subsidiary of the Seller from time to time.
(c) The Mortgages Trustee and/or Funding and the Security Trustee may require the Administrator to assign to the Mortgages Trustee any rights which the Administrator may have against any sub-contractor or delegate arising from the performance of services by such person in association with any matter contemplated by this Agreement and the Administrator acknowledges that such rights assigned to the Mortgages Trustee will be exercised by the Mortgages Trustee as trustee for the Beneficiaries subject to the terms of the Mortgages Trust Deed.
(d) Notwithstanding any sub-contracting or delegation of the performance of the Administrator's obligations under this Agreement:
(i) the Administrator shall not thereby be released or discharged from any liability hereunder;
(ii) the Administrator shall remain responsible for the performance of the obligations of the Administrator under this Agreement;
(iii) the performance or non-performance or the manner of performance of any sub-contractor or delegate of any of the Services shall not affect the Administrator's obligations under this Agreement;
(iv) any breach in the performance of the Services by any sub-contractor or delegate shall, subject to the Administrator being entitled for a period of twenty (20) Business Days from receipt of notice of the breach to remedy such breach by any sub-contractor or delegate, be treated as a breach of this Agreement by the Administrator; and
(v) the Security Trustee shall have no liability for any act or omission of the sub-contractor or delegate and shall have no responsibility for monitoring or investigating the suitability of any such sub-contractor or delegate.
Unbundled Copper Loops (UCL) 2.4.1 BellSouth shall make available Unbundled Copper Loops (UCLs). The UCL is a copper twisted pair Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters) and is not intended to support any particular telecommunications service. The UCL will be offered in two types – Designed and Non-Designed.
SUB-CONTRACTING 31.1. The Authority approves the appointment of the sub-contractors specified in Schedule 10 (Approved Sub-contractors) in respect of the obligations specified in that Schedule.
31.2. The Contractor may not sub-contract its obligations under the Framework Agreement to other sub-contractors without the prior written consent of the Authority. Sub-contracting of any part of the Framework Agreement shall not relieve the Contractor of any obligation or duty attributable to the Contractor under the Framework Agreement. The Contractor shall be responsible for the acts and omissions of its sub-contractors as though they are its own.
31.3. Where the Contractor enters into a sub-contract the Contractor must ensure that a provision is included which:
31.3.1. requires payment to be made of all sums due by the Contractor to the sub- contractor within a specified period not exceeding 30 days from the receipt of a valid invoice as defined by the sub-contract requirements and provides that, where the Authority has made payment to the Contractor in respect of Services and the sub-contractor’s invoice relates to such Services then, to that extent, the invoice must be treated as valid and, provided the Contractor is not exercising a right of retention or set-off in respect of a breach of contract by the sub-contractor or in respect of a sum otherwise due by the sub-contractor to the Contractor, payment must be made to the sub-contractor without deduction;
31.3.2. notifies the sub-contractor that the sub-contract forms part of a larger contract for the benefit of the Authority and that should the sub-contractor have any difficulty in securing the timely payment of an invoice, that matter may be referred by the sub- contractor to the Authority;
31.3.3. requires that all contracts with subcontractors and suppliers which the subcontractor intends to procure, and which the subcontractor has not before the date of this Framework Agreement, already planned to award to a particular supplier are advertised through the Public Contracts Scotland procurement portal (xxx.xxxxxxxxxxxxxxxxxxxxxxx.xxx.xx) and awarded following a fair, open, transparent and competitive process proportionate to the nature and value of the contract; and
31.3.4. is in the same terms as that set out in this clause 31.3 (including for the avoidance of doubt this clause 31.3.4) subject only to modification to refer to the correct designation of the equivalent party as the Contractor and sub-contractor as the case may be.
31.4. The Contractor shall include in every sub-contract:
31.4.1 a right for the Contractor to terminate that sub-contract if the relevant sub- contractor fails to comply in the performance of its contract with legal obligations in the fields of environmental, social or employment law or if any of the termination events (involving substantial modification of the Contract, contract award despite the existence of exclusion grounds or a serious infringement of EU legal obligations) specified in clause 42.4 occur; and
31.4.2 a requirement that the sub-contractor includes a provision having the same effect as 31.4.1 in any sub-contract which it awards. In this Clause 31.4, ‘sub-contract’ means any contract between two or more contractors, at any stage of remoteness from the Authority in a sub-contracting chain, made wholly or substantially for the purpose of performing (or contributing to the performanace of) the whole or any part of this Framework Agreement.
31.5. Where requested by the Authority, copies of any sub-contract must be sent by the Contractor to the Authority as soon as reasonably practicable.
31.6. Where the Contractor proposes to enter into a sub-contract it must:
31.6.1 advertise its intention to do so in at least one trade journal, and the Public Contracts Scotland Portal; and
31.6.2 follow a procedure leading to the selection of the sub-contractor which ensures reasonable competition following principles of equal treatment, non-discrimination and transparency and which ensures that such procedure is accessible by small and medium enterprises.
