Training Courses 16.4.1 Training courses, as well as the minimum and maximum numbers of trainees per course provided for the Buyer’s personnel, are defined in the applicable training course catalog published by ANACS (the “Training Course Catalog”) and will be scheduled as mutually agreed upon during a training conference (the “Training Conference”) that will be held as soon as practicable after signature of this Agreement and no later than May 31, 2007. AVA - A320 Family PA AMENDED AND RESTATED 16.4.2 The following terms will apply when training is performed ANACS: (i) Subject to 16.4.2(ii) below, training courses will be standard Airbus courses as described in ANACS applicable Training Course Catalog valid at the time of execution of the course. ANACS will be responsible for all training course syllabi, training aids and training equipment (not to include aircraft) necessary for the organization of the training courses. (ii) Where ANACS agrees to perform training using Buyer’s standard courses, Buyer will be responsible for taking all steps necessary to assure approval by applicable Aviation Authorities of such training (including any needed approvals of specific ANACS instructors). (iii) The training curricula and the training equipment used for flight crew, cabin crew and maintenance training will not be fully customized but will be configured in order to obtain the relevant Aviation Authority’s approval and to support the Seller’s training programs. Notwithstanding the foregoing, the training curricula used for training performed under such circumstances shall enumerate any differences that exist between the non-customized material and Buyer’s detailed specification. (iv) Training data and documentation necessary for training detailed in Appendix A to this Clause 16 will be and will not be revised. Training data and documentation will be marked “FOR TRAINING ONLY” and as such will be supplied for the sole and express purpose of training. (v) Upon the request of the Buyer [*], the Seller will collect and pack for consolidated shipment to the Buyer’s facility, all training data and documentation of the Buyer’s trainees attending training at the Seller’s Training Center. This training data and documentation will be delivered [*]. It is understood that title to and risk of loss of the training data and documentation will pass to the Buyer [*]. 16.4.3.1 If the Buyer decides to cancel fully or partially or reschedule, a training course, a minimum advance notification of at least [*] calendar days prior to the relevant training course start date is required. 16.4.3.2 If such notification is received by the Seller or ANACS less than [*] but more than [*] calendar days prior to such training, a cancellation fee corresponding to [*] of such training will be deducted from the training allowance defined in Appendix A to the extent sufficient allowance then remains, with any balance invoiced at the price corresponding to such training in the then current ANACS Customer Services Catalog. 16.4.3.3 If such notification is received by the Seller less than [*] calendar days prior [*] of such training will be deducted from the training allowance defined in Appendix A to the extent sufficient allowance then remains, with any balance invoiced at the price corresponding to such training in the then current ANACS Customer Services Catalog. 16.4.3.4 [*]
Staff Training 3.3.5.1 The CONTRACTOR shall provide regular and ongoing comprehensive training for CONTRACTOR staff to ensure that they understand the goals of Centennial Care 2.0, including the integration of physical, Long-Term Care and Behavioral Health, the provisions and limitations of the ABP and the requirements of this Agreement. As issues are identified by the CONTRACTOR and/or HSD, the CONTRACTOR shall provide timely and targeted training to staff. 3.3.5.2 The CONTRACTOR shall provide an initial orientation and training as well as ongoing training, including training targeted to different types of staff, to ensure compliance with this Agreement. Including targeted training regarding: 3.3.5.2.1 Care Coordination; 3.3.5.2.2 Nursing Facility Level of Care Determinations; 3.3.5.2.3 Setting of Care Submissions; 3.3.5.2.4 Community Benefit Services and Supplemental Questionnaire; and
TRAINING AND RELATED MATTERS The parties recognise that in order to increase the efficiency and productivity of the company a significant commitment to structured training and skill development is required. Accordingly the parties commit themselves to: a) The parties to this Agreement recognise the importance of the apprenticeship system to the construction industry. It is agreed that every employer party to this Agreement who employs five (5) or more tradespersons in any one classification shall undertake to employ at least one (1) apprentice or make arrangements to host an apprentice from an agreed group apprenticeship scheme. Where an employer does not currently have an apprentice as per this provision, reasonable time shall be allowed to enable the employer to comply with this clause. Further, the parties are committed to a strong ratio of apprentices in the industry. Apprenticeship levels on a specific project may be discussed at the Project Pre-Commencement Conference (refer Clause 16). b) Providing employees with the opportunity to acquire additional skills within relevant career path structures through appropriate structured training based on nationally endorsed (i.e. Construction Training Australia endorsed) competency standards and curriculum; c) Actively encouraging employees to seek formal recognition of their skills (i.e. recognition of prior learning); and d) Using training providers accredited and acceptable to the parties. The CFMEU, MBAV and other employer associations are legitimately engaged in providing training to industry and it is hereby agreed that all parties will properly recognise and accept the validity of nationally accredited training as provided by the other parties. e) The parties will consult on the development of training programs which are consistent with the following: • Training provided will be consistent with the company’s business requirements, relevant to the work of the employees, consistent with the skills development of each employee and with applicable national competency standards. • Training may be taken either on or off the job with all reasonable steps being taken to conduct training in normal working hours. • If an approved training activity is undertaken during ordinary working hours, the employee/s concerned shall not suffer any loss of pay. • Approved training activities undertaken outside of ordinary hours will be paid at single time or will, at the employee’s option, be taken as time off in lieu of payment. Provided that the scheduling of time off must be consistent with the needs of the business and be by agreement with the company. • Training costs of courses approved by the company will be met by the company. • The company will not be asked to meet the costs of training undertaken by employees which was not approved by the company. • Leave of absence granted pursuant to this clause shall count as service for all purposes of the award and this agreement. • Accredited members of the union will be allowed up to 5 days per year, without loss of pay, to attend trade union educational courses conducted or approved by the union. (see appendix H) f) The parties to this Agreement recognise the importance of the role that Apprentices/Trainees fulfill within the industry and, more importantly, a role that they will fulfill as trades persons following the conclusion of the indentures. To this end the Victorian Building Industry Consultative Committee will investigate ways of enhancing employment prospects for Apprentice/Trainees. In addition it is agreed that, where appropriate, employers will use their best endeavours to employ Apprentices/Trainees in order to ensure appropriate trade persons levels for the future.
Training and Orientation (a) No employee shall be required to work on any job or operate any piece of equipment until he/she has received proper training and instruction. (b) The Employer shall provide sufficient and adequate training and/or orientation to any employee working in a new or unfamiliar work area or position.
Trainings Appointment of any length involving two (2) or more Consumers who might need to split up to join different trainings, group discussions, etc.
Presentation of Potential Target Businesses The Company shall cause each of the Initial Shareholders to agree that, in order to minimize potential conflicts of interest which may arise from multiple affiliations, the Initial Shareholders will present to the Company for its consideration, prior to presentation to any other person or company, any suitable opportunity to acquire an operating business, until the earlier of the consummation by the Company of a Business Combination or the liquidation of the Company, subject to any pre-existing fiduciary obligations the Initial Shareholders might have.
Lobbying Activities - Standard Form - LLL No response Do not upload this form unless Vendor has reportable lobbying activities. There are Attributes entitled, “2 CFR Part 200 or Federal Provision - Xxxx Anti-Lobbying Amendment – Continued.” Properly respond to those Attributes and only upload this form if applicable/instructed. If upload is required based on your response to those Attributes, the Disclosure of Lobbying Activities – Standard Form - LLL must be downloaded from the “Attachments” section of the IonWave eBid System, reviewed, properly completed, and uploaded to this location.
Lobbying Activities [Added] A. Pursuant to 31 U.S.C. § 1352, and any regulations promulgated thereunder, the Contractor hereby assures and certifies, to the best of its knowledge and belief, that no federally appropriated funds have been paid, or will be paid, by or on behalf of the Contractor, to any person for influencing or attempting to influence an officer or employee of any agency, a member of Congress, an officer or employee of Congress, or an employee of a member of Congress, in connection with the awarding of any federal contract, the making of any federal grant, the making of any federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any federal contract, grant, loan or cooperative agreement. B. If any funds other than federally appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a member of Congress, an officer or employee of Congress, or an employee of a member of Congress in connection with this Contract, the Contractor shall complete and submit Standard Form-LLL, “Disclosure Form to Report Lobbying”. If the Contractor is required to submit Standard Form-LLL, the form and instructions for preparation of the form may be obtained from the State. C. The Contractor shall require that the language of this certification be included in any subcontracts and that all subcontractors shall certify and disclose accordingly. D. The foregoing certification is a material representation of fact upon which reliance was or will be placed when entering into this Contract and any transactions with the State. Submission of this certification is a prerequisite for making or entering into any transaction as imposed by 31 U.S.C. § 1352. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000.00 and not more than $100,000.00 for each such failure.
Training and Promotion a. The contractor will assist in locating, qualifying, and increasing the skills of minorities and women who are applicants for employment or current employees. Such efforts should be aimed at developing full journey level status employees in the type of trade or job classification involved. b. Consistent with the contractor's work force requirements and as permissible under Federal and State regulations, the contractor shall make full use of training programs, i.e., apprenticeship, and on-the-job training programs for the geographical area of contract performance. In the event a special provision for training is provided under this contract, this subparagraph will be superseded as indicated in the special provision. The contracting agency may reserve training positions for persons who receive welfare assistance in accordance with 23 U.S.C. 140(a). c. The contractor will advise employees and applicants for employment of available training programs and entrance requirements for each. d. The contractor will periodically review the training and promotion potential of employees who are minorities and women and will encourage eligible employees to apply for such training and promotion.
Convicted, Discriminatory, Antitrust Violator, and Suspended Vendor Lists In accordance with sections 287.133, 287.134, and 287.137, F.S., the Contractor is hereby informed of the provisions of sections 287.133(2)(a), 287.134(2)(a), and 287.137(2)(a), F.S. For purposes of this Contract, a person or affiliate who is on the Convicted Vendor List, the Discriminatory Vendor List, or the Antitrust Violator Vendor List may not perform work as a contractor, supplier, subcontractor, or consultant under the Contract. The Contractor must notify the Department if it or any of its suppliers, subcontractors, or consultants have been placed on the Convicted Vendor List, the Discriminatory Vendor List, or the Antitrust Violator Vendor List during the term of the Contract. In accordance with section 287.1351, F.S., a vendor placed on the Suspended Vendor List may not enter into or renew a contract to provide any goods or services to an agency after its placement on the Suspended Vendor List. A firm or individual placed on the Suspended Vendor List pursuant to section 287.1351, F.S., the Convicted Vendor List pursuant to section 287.133, F.S., the Antitrust Violator Vendor List pursuant to section 287.137, F.S., or the Discriminatory Vendor List pursuant to section 287.134, F.S., is immediately disqualified from Contract eligibility.
