Extruder Sample Clauses

Extruder. The processing capacity of the extruder (drive power 90 kW) in the ATB plant is set around 300 kg/h (dry matter). This value only applies if the whole setup is optimal and the raw material has properties comparable to agricultural silages such as corn silage (high water content above 50 %). The usual throughput is below 300 kg/h, commonly between 200 kg/h and 250 kg/h (dry matter). The more water is added to the process, the faster the material passes through because friction is reduced, resulting in reduced energy consumption and a lower milling effect. This means that more material can be fed in but at the cost of particle size (Figure 11). Higher moisture content, leading to longer fibres with more throughput and less energy could therefore be a win-win. Several extruder settings can be adjusted during the process, such as aperture (opening), screw speed, feeding speed and filling level. Which settings are optimal depends on the characteristics of the input material, and the properties required of the output material.
Sample 1
AutoNDA by SimpleDocs
Extruder. 18. Bending only pipe formations associated with welded pipe. All induction bending and tube bending (Instrumentation) would be excluded. (Metal Trades wage and benefit package shall be a minimum equal to Metal Trades III performing this work.)
Sample 1
Extruder. 1. Clean all dies, inside, and outside of all extruder parts.
Sample 1

Related to Extruder

  • Brakes Master cylinder, wheel cylinders, hydraulic lines and fittings, power booster and brake callipers. Excludes linings, pads, drums and discs.

  • Metalwork Section 2

  • Welder (a) The Welder shall when issued a specific job assume the role of a Welder and representative of the Employer and take the initiative to perform the work, according to the best practice of this industry. Where circumstances are beyond his or her control he or she shall immediately advise the Employer.

  • Trench Rock Trench rock is defined as any material that must be removed from a trench that cannot be excavated with a hydraulic excavator having a bucket curling force rated at not less than 18,300 pounds (Caterpillar Model 215 or equivalent) and occupies an original volume of at least one-half cubic yard.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • MSEA SEIU shall have exclusive rights to payroll deduction of membership dues, service fees, and premiums for current MSEA-SEIU spon- sored insurance programs. Deductions for other programs may be mutually agreed to by the parties.

  • Oddělitelnost Pokud bude jakékoliv ustanovení, právo nebo nápravný prostředek uvedený v této Smlouvě shledán soudem příslušné jurisdikce nevynutitelným nebo neúčinným, nebude tím ovlivněna platnost a vynutitelnost zbývajících ustanovení.

  • FABRICATION Making up data or results and recording or reporting them.

  • MASONRY 4.1 Storm Shelter Area/Tornado Protection: In new building construction, provide lateral and vertical bracing in the walls around the employee toilet rooms. DIVISION 5 – METALS

Time is Money Join Law Insider Premium to draft better contracts faster.