Facility Mechanical Completion Inspection Sample Clauses

Facility Mechanical Completion Inspection. Seller shall notify Buyer when Mechanical Completion of the Generating Facilities is achieved. At discretion of Buyer, Seller shall schedule and arrange for Buyer to conduct an inspection of the Generating Facilities. The inspection shall be scheduled for a date, mutually agreeable to Seller and Buyer, which is within ten (10) Business Days of Seller’s notification of Mechanical Completion. Based on the inspection, Buyer may, within ten (10) Business Days of the inspection, prepare and provide to Seller a punch list of any observed defects or deficiencies in the construction work or discrepancies between installed equipment and workmanship and this Agreement. Seller shall be responsible for completion, correction, or otherwise addressing issues identified by the Buyer, and shall provide a written response to document actions taken in response to the punch list items. If requested by Buyer, Seller shall schedule and arrange a follow-up inspection for Buyer after all punch list items are resolved. All punch list items shall be resolved prior to the Commercial Operation Date of the Generating Facilities except those items specifically excepted by mutual agreement between Buyer and Seller.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Facility Mechanical Completion Inspection. Seller shall notify Buyer when Mechanical Completion of the Generating Facilities is achieved. At discretion of Buyer, Seller shall schedule and arrange for Buyer to conduct an inspection of the Generating Facilities. The inspection shall be scheduled for a date, mutually agreeable to Seller and Buyer, which is within ten (10) Business Days of Seller’s notification of Mechanical Completion. Based on the inspection, Buyer may, within ten (10) Business Days of the inspection, prepare and provide to Seller a punch list of any observed defects or deficiencies in the construction work or discrepancies between installed equipment and workmanship and this Agreement. Seller shall be responsible for completion, correction, or otherwise addressing issues identified by the Buyer, and shall provide a written response to document actions taken in response to the punch list items. If requested by Buyer, Seller shall schedule and arrange a follow-up inspection for Buyer after all punch list items are resolved. All punch list items shall be resolved prior to the Commercial Operation Date of the Generating Facilities except those items specifically excepted by mutual, written agreement between Buyer and Seller. Force Majeure Event. In the event that a Force Majeure Event causes any delay in the achievement of a milestone, such milestone’s deadline may be extended, together with any Force Majeure Event extensions for other milestones, for a period not to exceed, in the aggregate, six (6) months. The extension of the deadline for any milestone shall extend the deadline for all subsequent milestones, provided that in no event shall the combined extensions for Force Majeure Events for any or all of the milestones exceed six (6) months.
Sample 1
Facility Mechanical Completion Inspection. Seller shall notify Buyer when Mechanical Completion of the Generating Facilities is achieved. At discretion of Buyer, Seller shall schedule and arrange for Buyer to conduct an inspection of the Generating Facilities. The inspection shall be scheduled for a date, mutually agreeable to Seller and Buyer, which is within ten (10) Business Days of Seller’s notification of Mechanical Completion. Based on the inspection, Buyer may, within ten
Sample 1

Related to Facility Mechanical Completion Inspection

  • At Substantial Completion and Final Completion the Contractor shall provide a certification letter certifying that the Work does not contain asbestos as required by the UTUGCs.

  • Final Completion The full and final completion of all Work in accordance with the Contract Documents.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner.

  • Substantial Completion “Substantial Completion” means the stage in the progress of the Work when the Work, or designated portions thereof, may still require minor modifications or adjustments but, in the Owner’s opinion, the Work has progressed to the point such that all parts of the Work under consideration are fully operational and usable for intended purposes, as evidenced by a Certificate of Substantial Completion approved by the Owner. If a Certificate of Occupancy is required by public authorities having jurisdiction over the Work, said certificate shall be issued before the Work or any portion thereof is considered substantially complete. When the Contractor considers that the Work, or a portion thereof which the Owner agrees to accept separately, is substantially complete, the Contractor shall notify Owner’s Designated Representative (sometimes referred to as the “ODR”) and request a determination as to whether the Work or designated portion thereof is substantially complete. If the ODR does not consider the Work substantially complete, the ODR will notify the Contractor giving reasons therefore. Failure on the Owner’s part to list a reason does not alter the responsibility of the Contractor to complete all Work in accordance with the terms of this Agreement. After satisfactorily completing items identified by Owner’s Designated Representative, the Contractor shall then submit another request for the ODR to determine Substantial Completion. If The ODR considers the Work substantially complete, The ODR will prepare and deliver a certificate of Substantial Completion which shall establish the date of Substantial Completion, shall include a punch list of items to be completed or corrected before final completion and final payment, shall establish the time within which the Contractor shall finish the punch list, and shall establish responsibilities of the Owner and the Contractor for security, maintenance, heat, utilities, damage to the Work, warranty and insurance. Failure to include an item on the punch list does not alter the responsibility of the Contractor to complete all Work in accordance with the terms and conditions of this Agreement. The certificate of Substantial Completion shall be signed by the Owner and the Contractor to evidence acceptance of the responsibilities assigned to them in such certificate. Substantial Completion (as defined in this agreement) for all stages of the Work shall be achieved on or before the following Substantial Completion date: DATE FOR SUBSTANTIAL COMPLETION: TBD Under no circumstances will the time for Substantial Completion exceed this date without a written amendment to this Agreement. THE TIMES SET FORTH IN THE CONSTRUCTION DOCUMENTS ARE AN ESSENTIAL ELEMENT OF THE AGREEMENT. TIME LIMITS STATED IN THE CONTRACT DOCUMENTS ARE OF THE ESSENCE OF THIS AGREEMENT.

  • Drawings and Specifications at the Project Site The Contractor shall keep at the Site at least one copy of the Contract Documents and Change Orders, all in good order and available to the Design Professional and to his representatives.

  • COMMENCEMENT AND COMPLETION OF THE PROJECT Section 3.01 The Project

  • Construction Completion The related Construction shall have been completed substantially in accordance with the related Plans and Specifications, the related Deed and all Applicable Laws, and such Leased Property shall be ready for occupancy and operation. All fixtures, equipment and other property contemplated under the Plans and Specifications to be incorporated into or installed in such Leased Property shall have been substantially incorporated or installed, free and clear of all Liens except for Permitted Liens.

  • Environmental Inspection at End of Agreement Term A. At Authority’s discretion, at least one hundred and twenty (120) days before the expiration or early termination of the Term as provided herein, Company will conduct an environmental inspection and examination of the Company Premises. At its discretion, Authority may complete environmental reviews to determine if recognized environmental conditions exist that could warrant soil and groundwater sampling. If warranted by the findings of Company or Authority’s inspection or if requested by Authority, a compliance audit or site assessment will be performed within the aforementioned time period by a qualified professional acceptable to Authority who will report the findings to Authority. The cost for professional consulting or engineering services required for such audit will be at the expense of Company. If a site assessment is conducted, Company agrees to pay all associated laboratory and testing fees incurred to test and analyze samples collected during the site assessment process. The Authority may also choose to conduct the compliance audit or site assessment. If the results of the assessment indicate that the Company Premises have been impacted by the release of Hazardous Substances, Company will immediately take such action as is necessary and will provide a substantial guaranty in a form and content acceptable to Authority that Company will clean up the contamination at its own expense, at no expense to Authority, and in accordance with Applicable Laws to the extent that it is obligated to do so by virtue of the foregoing provisions of this Article.

  • Project Completion Part 1 – Material Completion

  • Final Completion Date Final Completion for the Work as defined in Article 6.1.3 of the General Conditions to the Continuing Contract for Construction Management shall be achieved by September 30, 2022.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!