Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures.
5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group.
5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise.
5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.
Switching and Tagging Rules Each Party shall provide the other Parties a copy of its switching and tagging rules that are applicable to the other Parties’ activities. Such switching and tagging rules shall be developed on a non-discriminatory basis. The Parties shall comply with applicable switching and tagging rules, as amended from time to time, in obtaining clearances for work or for switching operations on equipment.
Tests, Labs, and Imaging and X rays (diagnostic)
Forecasts and Orders 2.2.1 On the Effective Date of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the remainder of the current calendar year (the “Initial Annual Forecast”). Not later than November 30 of each calendar year during the Term of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the next subsequent calendar year (each, an “Annual Forecast”). The Annual Forecast shall be used to establish the per unit and per kilogram pricing for the Martek Products purchased during the relevant calendar year in accordance with Section 2.3.1 and Exhibit A attached hereto; provided that, for the remainder of calendar year 2006, the per kilogram pricing to be used, subject to the year-end adjustment pursuant to Section 2.3.1, shall be * per kilogram, notwithstanding the Initial Annual Forecast. In addition to the foregoing, one (1) month before the commencement of each calendar quarter during the Term of this Agreement, PURCHASER shall provide SELLER with a forecast (a “Rolling Forecast”) of PURCHASER’s requirements for the Martek Product for each of the succeeding four (4) quarters, specifying quantities and requested delivery dates. These forecasts will be PURCHASER’s good-faith, best estimate of requirements and should not be considered a firm commitment.
2.2.2 PURCHASER expressly acknowledges that available supplies of the Martek Product have been in the past, and, may from time to time in the future, be insufficient to meet current demand. Nevertheless, SELLER shall use commercially reasonable efforts to have available for shipment to PURCHASER or to a Designee for PURCHASER’s account such quantities of the Martek Product as PURCHASER forecasts in good faith pursuant to Section 2.2.1 above and any additional quantities which PURCHASER may reasonably request. In case for any reason SELLER cannot or does not supply such quantities of the Martek Products as are forecasted in good faith by PURCHASER pursuant to Section 2.2.1 to PURCHASER, PURCHASER shall be allowed to use an alternative supplier for quantities of Omega-3 and Omega-6 long-chain polyunsaturated fatty acids equal to those quantities of Martek Products that were ordered by PURCHASER pursuant to a Purchase Order and not delivered by SELLER.
2.2.3 PURCHASER shall issue and/or shall direct the Designee(s) to issue formal purchase orders (“Purchase Orders”) at least sixty (60) but no more than ninety (90) days in advance of the date on which PURCHASER or the Designee requests that SELLER ship the Martek Product. SELLER shall accept or reject any such Purchase Order within five (5) business days of receipt, provided that SELLER shall not reject any Purchase Order for any quantities within the most recent forecast.
2.2.4 Purchase Orders which have been accepted by SELLER shall be considered as firm and binding orders (subject to the provisions of Section 2.2.2 above) and shall only be canceled or amended by mutual written agreement of the parties. * CONFIDENTIAL TREATMENT REQUESTED. CONFIDENTIAL PORTION HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.
TIMELY PRICING AND ORDERS (a) AVIF or its designated agent will use its best efforts to provide LIFE COMPANY with the net asset value per Share for each Fund by 6:00 p.
Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.
PACKING AND SHIPMENT (a) Unless otherwise specified, all Work is to be packed in accordance with good commercial practice.
(b) A complete packing list shall be enclosed with all shipments. SELLER shall mark containers or packages with necessary lifting, loading, and shipping information, including the LOCKHEED XXXXXX Contract number, item number, dates of shipment, and the names and addresses of consignor and consignee. Bills of lading shall include this Contract number.
(c) Unless otherwise specified, delivery shall be FOB Place of Shipment.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
Manufacturing and Supply (a) Depomed shall supply Product for use in conducting Depomed’s development activities for Product in the Field and in the Territory as set forth in Exhibit D.
(b) During the four-year period beginning on the Effective Date (the “Supply Period”), Depomed shall supply and package (or have supplied and packaged) Product pursuant to this Section 4.8. Depomed will use commercially reasonable efforts to enter into a long-term Product supply agreement with [***] days after the Effective Date (the “Depomed Supply Agreement”) that will be freely assignable to Solvay or its Affiliates, successors or assigns at any time. In addition, Depomed and Solvay will negotiate and enter into a Product supply agreement with business terms substantially similar to the Depomed Supply Agreement concurrently with the execution and delivery by Depomed and [***] of the Depomed Supply Agreement (the “Solvay Supply Agreement”, and, together with the Depomed Supply Agreement, the “Supply Agreements”). The Supply Agreements will, together, contain the following provisions (among others mutually agreeable to the Parties):
(i) Under the Solvay Supply Agreement, Depomed will agree to supply Solvay with its requirements of finished, packaged Product during the Supply Period;
(ii) All manufacturing and records will be performed and maintained in accordance with specifications, cGMP and Applicable Law;
(iii) Depomed will provide reasonable assistance to Solvay in the event Solvay wishes to qualify a backup Product manufacturer;
(iv) Depomed shall [***];
(v) Solvay will pay Depomed the following amounts in connection with all activities performed by or on behalf of Depomed associated with Product manufacture and supply (other than activities specified on Exhibit D) (A) [***]% of Depomed’s out-of-pocket costs incurred in connection with such manufacture and supply of Product to Solvay, and (B) a labor charge equal to the FTE Charges for all Depomed employees allocated to the manufacture and supply of Product to Solvay, not to exceed FTE Charges for an aggregate of [***] during any given calendar quarter (and Depomed shall provide to Solvay periodic reports detailing the FTE Charges for which Solvay must pay Depomed hereunder);
Packaging and Labeling Seller shall properly xxxx, xxxx, and ship Goods and provide Buyer with shipment documentation showing the Order number, Seller’s identification number for the subject Goods, the quantity of goods in shipment and the number of cartons or containers in the shipment.
