Full Service Customers Sample Clauses

Full Service Customers. The rates and charges under this tariff are based on the customer maintaining a power factor of not less than 85% lagging. Any power factor less than 70% will not be permitted and the customer will be required to install at his own expense such corrective equipment as may be necessary to improve power factor. A penalty will be applied to the total amount of the monthly billing for electric energy for power factor below 85% lagging in accordance with the table in Power Factor Determination, Section C12. The Power Factor Clause shall not be applied to the on-peak billing demand ratchet nor to the minimum contract demand, but will be applied to metered quantities.
AutoNDA by SimpleDocs
Full Service Customers. Power Supply Charges: Capacity Energy Charge: 2.755¢ per kWh for all kWh Non-Capacity Energy Charge: 3.876¢ per kWh for all kWh Delivery Charges: Service Charge: $11.25 per month Distribution Charge: 3.866¢ per kWh for all kWh RATE SCHEDULE NO. D3.3 (Contd.) INTERRUPTIBLE GENERAL SERVICE RATE Surcharges and Credits: As approved by the Commission. See Sections C8.5 and C9.8.
Full Service Customers. The rates and charges under this tariff are based on the customer maintaining a power factor of not less than 85% lagging. Any power factor less than 70% will not be permitted and the customer will be required to install at his own expense such corrective equipment as may be necessary to improve power factor. A penalty will be applied to the total amount of the monthly billing for electric energy for power factor below 85% lagging in accordance with the table in Power Factor Determination, Section C12. The Power Factor Clause shall not be applied to the on-peak billing demand ratchet nor to the minimum contract demand, but will be applied to metered quantities. Primary Educational Institution Agreement – D6.2 P- 4 5/20 RATE SCHEDULE NO. D6.2 (Contd.) PRIMARY EDUCATIONAL INSTITUTION RATE Retail Access Service Customers: A power factor of less than 70% is not permitted and necessary corrective equipment must be installed by the Customer to correct to a minimum level of 70%. Power factor and excess Reactive Demand charges will be calculated at each Customer location at the time of the Location’s single highest 30-minute integrated kW reading of the Interval Demand Meter during the on-peak hours of the billing period, which are those hours from 7 a.m. until 11 p.m. consistent with the ITC Open Access Transmission Tariff. Excess Reactive Demand is any Reactive Demand resulting from operations below 80% power factor. A monthly charge of $3.50/kVAR will be applied to excess Reactive Demand.
Full Service Customers. The rates and charges under this tariff are based on the customer maintaining a power factor of not less than 85% lagging. Any power factor less than 70% will not be permitted and the customer will be required to install at his own expense such corrective equipment as may be necessary to improve power factor. A penalty will be applied to the total amount of the monthly billing for electric energy for power factor below 85% lagging in accordance with the table in Power Factor Determination, Section C12. The Power Factor Clause shall not be applied to the on-peak billing demand ratchet nor to the minimum contract demand, but will be applied to metered quantities. Interruptible Supply Agreement – D8 963-3707 P- 5 5/20 Retail Access Service Customers: A power factor of less than 70% is not permitted and necessary corrective equipment must be installed by the Customer to correct to a minimum level of 70%. Power factor and excess Reactive Demand charges will be calculated at each Customer location at the time of the Location’s single highest 30-minute integrated kW reading of the Interval Demand Meter during the on-peak hours of the billing period, which are those hours from 7 a.m. until 11 p.m. consistent with the ITC Open Access Transmission Tariff. Excess Reactive Demand is any Reactive Demand resulting from operations below 80% power factor. A monthly charge of $3.50/kVAR will be applied to excess Reactive Demand.
Full Service Customers. Power Supply Charges: Non-Capacity: The Energy charge will be the real time MISO locational hourly marginal energy price for the DTE Electric-appropriate load node. In addition to the MISO locational hourly marginal energy price the following charges will also apply:

Related to Full Service Customers

  • CONTRACTOR CUSTOMER SERVICE REPRESENTATIVE Contractor shall designate a customer service representative (and inform Enterprise Services of the same) who shall be responsible for addressing Purchaser issues pertaining to this Master Contract.

  • Supplier’s Staff 28.1 The Customer may, by written notice to the Supplier, refuse to admit onto, or withdraw permission to remain on, the Premises:

  • Customer The agency or eligible user that purchases commodities or contractual services pursuant to the Contract.

Time is Money Join Law Insider Premium to draft better contracts faster.