New Employee Orientation The Union will provide each agency personnel director with the names and addresses of up to two (2) authorized Union representatives per agency to receive notice of each formal orientation meeting held by the Department. The notice will be sent as soon as such meetings are scheduled (but not less than ten (10) days in advance) and will include date, time and location. Due to operational exigencies, agencies may schedule an orientation which will provide the Union with less than the requisite ten (10) days' notice; however the Union shall be notified as soon as possible after the scheduling of the orientation and the Union representative shall be released from duty. Agencies shall routinely schedule orientations in a manner that will allow for the ten (10) day advance notice to the Union. During the formal orientation, the Union will be permitted to give a twenty (20) minute presentation which may include an enrollment in supplemental Union benefits. The parties shall encourage employee attendance, although attendance shall not be mandatory if an employee objects to attending the presentation. In the event a formal orientation meeting is not held, or the Union is unable to attend the formal orientation because the designated Union representatives cannot be released under Article 4, the Employer shall allow the Union representative and the employee(s) to meet during duty hours at a mutually agreed upon time and location for twenty (20) minutes Employee participation in these meetings shall be encouraged although an employee shall not be required to attend such a meeting.
Distribution Services 3.1. Distributor will have the right, as agent for the Fund, to enter into dealer agreements with responsible investment dealers, and to sell Shares to such investment dealers against orders therefor at the public offering price (as defined below) stated in the Fund’s effective Registration Statement on Form N-2 under the 1940 Act and the Securities Act of 1933, as amended (the “Securities Act”), including the then-current prospectus and statement of additional information (the “Registration Statement”). Upon receipt of an order to purchase Shares from a dealer with whom Distributor has a dealer agreement, Distributor will promptly cause such order to be filled by the Fund.
3.2. Distributor will also have the right, as agent for the Fund, to sell such Shares to the public against orders therefor at the public offering price (as defined below) and in accordance with the Registration Statement.
3.3. Distributor will also have the right to take, as agent for the Fund, all actions which, in Distributor’s reasonable judgment, are necessary to carry into effect the distribution of the Shares.
3.4. The “public offering price” for the Shares of the Fund shall be the net asset value (“NAV”) of the Shares then in effect, plus any applicable sales charge determined in the manner set forth in the Registration Statement or as permitted by the 1940 Act and the rules and regulations promulgated by the SEC or other applicable regulatory agency or self-regulatory organization under the oversight of the SEC. In no event shall any applicable sales charge exceed the maximum sales charge permitted by the Rules of FINRA.
3.5. The NAV of the Shares of the Fund shall be determined in the manner provided in the Registration Statement, and when determined shall be applicable to transactions as provided for in the Registration Statement. The NAV of the Shares shall be calculated by the Fund or by another entity on behalf of the Fund. Distributor shall have no duty to inquire into or liability for the accuracy of the NAV per Share as calculated.
3.6. On every sale, the Fund shall receive the applicable NAV of the Shares promptly, but in no event later than the third business day following the date on which Distributor shall have received an order for the purchase of the Shares.
3.7. Upon receipt of purchase instructions, Distributor will transmit such instructions to the Fund or its transfer agent for the issuance and registration of the Shares purchased.
3.8. Distributor, as agent of and for the account of the Fund, may repurchase the Shares at such prices and upon such terms and conditions as shall be specified in the Registration Statement.
3.9. Distributor shall maintain membership with the National Securities Clearing Corporation (“NSCC”) and any other similar successor organization to sponsor a participant number for the Fund so as to enable the Shares to be traded through FundSERV. The Distributor shall not be responsible for any operational matters associated with FundSERV or networking transactions.
3.10. Distributor will review all proposed advertising materials and sales literature for compliance with Applicable Law and shall file such materials with appropriate regulators as required by current laws and regulations. Distributor agrees to furnish the Fund with any comments provided by regulators with respect to such materials.
3.11. Distributor shall prepare or cause to be prepared reports for the Board of Trustees (the “Board”) of the Fund regarding its activities under this Agreement as reasonably requested by the Board.
Anesthesia Services This plan covers general and local anesthesia services received from an anesthesiologist when the surgical procedure is a covered healthcare service. This plan covers office visits or office consultations with an anesthesiologist when provided prior to a scheduled covered surgical procedure.
New Hire Orientation The Union’s Business Representative or designee shall be given the opportunity to make a membership presentation at the employer’s regularly scheduled new employee orientation sessions.
Secondary Systems The Developer and Connecting Transmission Owner shall each cooperate with the other in the inspection, maintenance, and testing of control or power circuits that operate below 600 volts, AC or DC, including, but not limited to, any hardware, control or protective devices, cables, conductors, electric raceways, secondary equipment panels, transducers, batteries, chargers, and voltage and current transformers that directly affect the operation of Developer or Connecting Transmission Owner’s facilities and equipment which may reasonably be expected to impact the other Party. The Developer and Connecting Transmission Owner shall each provide advance notice to the other Party, and to NYISO, before undertaking any work on such circuits, especially on electrical circuits involving circuit breaker trip and close contacts, current transformers, or potential transformers.
TRAINING AND RELATED MATTERS The parties recognise that in order to increase the efficiency and productivity of the company a significant commitment to structured training and skill development is required. Accordingly the parties commit themselves to:
a) The parties to this Agreement recognise the importance of the apprenticeship system to the construction industry. It is agreed that every employer party to this Agreement who employs five (5) or more tradespersons in any one classification shall undertake to employ at least one (1) apprentice or make arrangements to host an apprentice from an agreed group apprenticeship scheme. Where an employer does not currently have an apprentice as per this provision, reasonable time shall be allowed to enable the employer to comply with this clause. Further, the parties are committed to a strong ratio of apprentices in the industry. Apprenticeship levels on a specific project may be discussed at the Project Pre-Commencement Conference (refer Clause 16).
b) Providing employees with the opportunity to acquire additional skills within relevant career path structures through appropriate structured training based on nationally endorsed (i.e. Construction Training Australia endorsed) competency standards and curriculum;
c) Actively encouraging employees to seek formal recognition of their skills (i.e. recognition of prior learning); and
d) Using training providers accredited and acceptable to the parties. The CFMEU, MBAV and other employer associations are legitimately engaged in providing training to industry and it is hereby agreed that all parties will properly recognise and accept the validity of nationally accredited training as provided by the other parties.
e) The parties will consult on the development of training programs which are consistent with the following: • Training provided will be consistent with the company’s business requirements, relevant to the work of the employees, consistent with the skills development of each employee and with applicable national competency standards. • Training may be taken either on or off the job with all reasonable steps being taken to conduct training in normal working hours. • If an approved training activity is undertaken during ordinary working hours, the employee/s concerned shall not suffer any loss of pay. • Approved training activities undertaken outside of ordinary hours will be paid at single time or will, at the employee’s option, be taken as time off in lieu of payment. Provided that the scheduling of time off must be consistent with the needs of the business and be by agreement with the company. • Training costs of courses approved by the company will be met by the company. • The company will not be asked to meet the costs of training undertaken by employees which was not approved by the company. • Leave of absence granted pursuant to this clause shall count as service for all purposes of the award and this agreement. • Accredited members of the union will be allowed up to 5 days per year, without loss of pay, to attend trade union educational courses conducted or approved by the union. (see appendix H)
f) The parties to this Agreement recognise the importance of the role that Apprentices/Trainees fulfill within the industry and, more importantly, a role that they will fulfill as trades persons following the conclusion of the indentures. To this end the Victorian Building Industry Consultative Committee will investigate ways of enhancing employment prospects for Apprentice/Trainees. In addition it is agreed that, where appropriate, employers will use their best endeavours to employ Apprentices/Trainees in order to ensure appropriate trade persons levels for the future.
Orientation Program The Company will allow a designated representative of the Local or Bargaining Unit up to one (1) hour per calendar month for the purpose of conducting the Communications, Energy and Paperworkers Union New Members’ Orientation Program. Such meetings will be conducted during the probationary period of employees, and will be held on Company premises. Employees participating in Orientation Program meetings during their normally scheduled working hours will not suffer loss of pay at their regular rate. Orientation Program meetings will be scheduled by Management and a Management representative may attend as an observer.
Multi-Year Planning The CAPS will be in a form acceptable to the LHIN and may be required to incorporate (1) prudent multi-year financial forecasts; (2) plans for the achievement of performance targets; and (3) realistic risk management strategies. It will be aligned with the LHIN’s then current Integrated Health Service Plan and will reflect local LHIN priorities and initiatives. If the LHIN has provided multi-year planning targets for the HSP, the CAPS will reflect the planning targets.
Prosthodontics We Cover prosthodontic services as follows:
Dental Services The following dental services are not covered, except as described under Dental Services in Section 3: • Dental injuries incurred as a result of biting or chewing. • General dental services including, but not limited to, extractions including full mouth extractions, prostheses, braces, operative restorations, fillings, frenectomies, medical or surgical treatment of dental caries, gingivitis, gingivectomy, impactions, periodontal surgery, non-surgical treatment of temporomandibular joint dysfunctions, including appliances or restorations necessary to increase vertical dimensions or to restore the occlusion. • Panorex x-rays or dental x-rays. • Orthodontic services, even if related to a covered surgery. • Dental appliances or devices. • Preparation of the mouth for dentures and dental or oral surgeries such as, but not limited to, the following: o apicoectomy, per tooth, first root; o alveolectomy including curettage of osteitis or sequestrectomy; o alveoloplasty, each quadrant; o complete surgical removal of inaccessible impacted mandibular tooth mesial surface; o excision of feberous tuberosities; o excision of hyperplastic alveolar mucosa, each quadrant; o operculectomy excision periocoronal tissues; o removal of partially bony impacted tooth; o removal of completely bony impacted tooth, with or without unusual surgical complications; o surgical removal of partial bony impaction; o surgical removal of impacted maxillary tooth; o surgical removal of residual tooth roots; and o vestibuloplasty with skin/mucosal graft and lowering the floor of the mouth. • The following dialysis services received in your home: o installing or modifying of electric power, water and sanitary disposal or charges for these services; o moving expenses for relocating the machine; o installation expenses not necessary to operate the machine; and o training in the operation of the dialysis machine when the training in the operation of the dialysis machine is billed as a separate service. • Dialysis services received in a physician’s office.
