We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

GENUINE PARTS Sample Clauses

GENUINE PARTS. Each unused, undamaged and unsold GENUINE PART, and each unopened item of appearance and maintenance materials and paints (hereinafter called "maintenance items") in the Dealer's stock on the effective date of such termination or nonrenewal, provided such GENUINE PART or maintenance item is offered for sale by the Company to authorized dealers in VEHICLES in the Company's then current Parts and Accessories Price Schedules, is in first-class salable condition including reasonably legible and usable packaging and was purchased by the Dealer from the Company or another Company authorized dealer in normal volume prior to giving or receiving notice of such termination or nonrenewal. Notwithstanding the foregoing, the repurchase of such GENUINE PARTS identified by the Company as accessories shall be limited to those so purchased by the Dealer within twelve (12) months preceding such date, or those sold to the Dealer by the Company for use in a VEHICLE that is a current model on such effective date. The price for each such GENUINE PART or maintenance item shall be its DEALER PRICE in effect on the effective date of termination or nonrenewal, less all allowances paid or applicable allowances offered thereon by the Company. The Dealer, at his own expense, shall carefully pack and box such of the eligible GENUINE PARTS and maintenance items as the Company may direct, and the Company shall pay the Dealer an additional five percent (5%) of the DEALER PRICE of the eligible GENUINE PARTS and maintenance items so packaged and boxed.
AutoNDA by SimpleDocs
GENUINE PARTS. 24 (c) Dealer's Signs .................................... 24 (d) Special Tools and Equipment ....................... 24 (e) Procedures, Xxxxxxxx and Title .................... 25 (f) Payment ........................................... 25 (g)
GENUINE PARTS. 26 Manufacturer . . . . . . . . . . . . . . . . . . . .
GENUINE PARTSThe Company shall use Manufacturer approved genuine parts and components and factory approved lubricants except where any such parts, components or lubricants are not readily available, or not available at a reasonable price (as determined by the Company), in which case the Company may use such other parts, components or lubricants which are of a similar quality (as determined by the Company, acting reasonably) provided that the use of such parts, components or lubricants will not cause any current Manufacturer’s warranty in respect of the Machine to be voided or voidable.

Related to GENUINE PARTS

  • Spare Parts 14.1 As specified, the supplier may be required to provide any or all of the following materials, notifications, and information pertaining to spare parts manufactured or distributed by the supplier: (a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election shall not relieve the supplier of any warranty obligations under the contract and; (b) In the event of termination of production of the spare parts: (i) advance notification to the purchaser of the pending termination, in sufficient time to permit the purchaser to procure needed requirements and; (ii) Following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and specifications of the spare parts, if requested.

  • REPAIRED OR REPLACED PARTS / COMPONENTS Where the Contractor is required to repair, replace or substitute Product or parts or components of the Product under the Contract, the repaired, replaced or substituted Products shall be subject to all terms and conditions for new parts and components set forth in the Contract including Warranties, as set forth in the Additional Warranties Clause herein. Replaced or repaired Product or parts and components of such Product shall be new and shall, if available, be replaced by the original manufacturer’s component or part. Remanufactured parts or components meeting new Product standards may be permitted by the Commissioner or Authorized User. Before installation, all proposed substitutes for the original manufacturer’s installed parts or components must be approved by the Authorized User. The part or component shall be equal to or of better quality than the original part or component being replaced.

  • Accessories, Spare Parts and Tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

  • COUNTER-PARTS 20.1 This Agreement may be executed in any number of counterparts, each of which when so executed and delivered shall be deemed an original, and all of which together shall constitute one and the same agreement. Execution of a facsimile or scanned copy will have the same force and effect as execution of an original, and a facsimile or scanned signature will be deemed an original and valid signature.

  • ESTIMATED / SPECIFIC QUANTITY CONTRACTS Estimated quantity contracts, also referred to as indefinite delivery / indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given. With respect to any specific quantity stated in the contract, the Commissioner reserves the right after award to order up to 20% more or less (rounded to the next highest whole number) than the specific quantities called for in the Contract. Notwithstanding the foregoing, the Commissioner may purchase greater or lesser percentages of Contract quantities should the Commissioner and Contractor so agree. Such agreement may include an equitable price adjustment.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • MODELDOCUMEN As additional consideration for the final payment, Contractor agrees, to the fullest extent permitted by law, to indemnify and hold harmless Princeton University from and against all costs, losses, damages, claims, causes of action, judgments and expenses, including attorney’s fees, arising out of or in connection with any claims or causes of action for payment or any liens asserted against Princeton University, or the aforesaid land and improvements (including personal property related thereto), which arise out of the performance of the work under the Contract and which may be asserted by the Contractor or any of its subcontractors, sub-subcontractors or materialmen of any tier thereof. As additional consideration for the final payment aforementioned, Contractor hereby unconditionally releases and forever discharges Princeton University from all claims for payment and all other claims and causes of action of every nature, known or unknown, arising out of or in connection with the performance of the said Contract. This release and discharge shall not apply to claims that Contractor may have against Princeton University for contribution or indemnity (if any) based upon third party claims asserted against Contractor for personal injury or damage to property asserted after the date hereof. Contractor further declares that it has made proper payment of all monies due to all of its employees, subcontractors and suppliers of labor, materials, and/or equipment, and agrees to indemnify and hold Princeton University harmless from any claim or demand it might suffer by reason of failure of this certification. The foregoing shall not relieve Contractor of its obligations under the provisions of said Contract, as amended, which by nature survive completion of the Work including without limitation, warranties, guarantees, and indemnities. Given under our hand and seal this date: by /Form signed and dated by Contractor/ With reference to Subcontract No. as amended, by and between (“Subcontractor”) and _ (“Contractor”) for work for the construction of (the “Project”), the undersigned Subcontractor hereby certifies and represents that conditioned upon full payments of the sum of $ (the “final payment”) pursuant to Subcontractor Application for Payment No. _ dated _ in the amount of $ it has made full payment of all costs, charges and expenses incurred by it or on its behalf for work, labor, services, materials and equipment supplied to the foregoing premises and/or used in connection with its work under said Subcontract. The undersigned Subcontractor further certifies that to its best knowledge and belief, each of its subcontractors and materialmen has made full payment of all costs, charges and expenses incurred by them or on their behalf for work, labor, services, materials and equipment supplied to the foregoing premises and/or used by them in connection with the Subcontractor’s work under said Subcontract. Prior to the date of this Release, the Undersigned further certifies that it has received payments from the Contractor which total $ _. In consideration for the payment of the final payment as set forth above, the Subcontractor hereby unconditionally releases and forever discharges Princeton University and the Contractor and their affiliates and their respective officers, directors, agents, and representatives and Princeton University’s premises and property from all claims, causes of action, liens and obligations of every nature arising out of or in connection with the performance of the said Subcontract and all amendments thereto. This release and discharge shall not apply to claims that Subcontractor may have against Princeton University or Contractor for contribution or indemnity (if any) based upon third party claims asserted against Subcontractor for personal injury or damage to property asserted after the date hereof. As additional consideration for the final payment, the Subcontractor agrees, to the fullest extent permitted by law, to indemnify and hold harmless Princeton University and Contractor from and against all costs, losses damages, claims, causes of action, judgments and expenses, including attorney’s fees arising out of or in connection with claims against Princeton University or Contractor which claims arise out of the performance of the work under the Subcontract and which may be asserted by the Subcontractor or any of its suppliers, subcontractors of any tier or any of their representatives, officers, agents or employees.

  • Replacement Parts Replacement parts for goods purchased by Buyer are for the purpose of this Section defined as “Parts” (and are also considered “goods” under this Order). Unless specified otherwise by Buyer in writing, Supplier shall provide Parts (or upon Buyer’s written consent, an alternative replacement part that provides the same form, fit and function as the Part(s)) for a period of twenty (20) years after production of the goods (into which the applicable Parts are incorporated) ceases. Supplier shall continue to supply such Parts past the twenty (20) year period if Buyer orders at least twenty (20) Parts per year during such twenty-year period. The prices for any Parts purchased in the first two (2) years of the twenty-year period shall not exceed those prices in effect at the time production of the goods ceases, and no set up charges shall be permitted by Supplier or paid by Xxxxx during this two-year period. Thereafter, the prices for Parts shall be negotiated based on Supplier’s actual cost of production of such Parts plus any special packaging costs. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the twenty-year period, Supplier shall continue to maintain in good working condition all Supplier-owned tooling required to produce the Parts and shall not dispose of such tooling without offering Buyer the right of first refusal to purchase such tooling.

  • Photographs You give your permission to us to use any photograph or photographic image including video or video stills taken of you while you are in any public spaces, grounds, offices at the Property or any sponsored events at the Property. You grant us and the Manager and our designees, the irrevocable and unrestricted right and permission to copyright, in its own name or otherwise, and to use, re-use, publish and re-publish photographic or video portraits or pictures of you or in which you may be included, without restriction as to changes or alterations. This usage may be in conjunction with your own name or a fictitious name. It may involve reproductions in color or otherwise that may be made through any medium, and in any and all media now or hereafter known. Usage may include illustration, promotion, art, editorial, advertising, trade, or any other legal purpose. You also consent to the use of any printed matter in conjunction with that usage. You waive any right that you may have to inspect or approve the finished product, the advertising copy or other matter that may be used in that regard. I hereby waive any right that I may have to inspect or approve the finished product and the advertising copy or other matter that may be used in connection therewith or the use to which it may be applied. You agree that we, the Manager and our designees will have no liability due to any blurring, distortion, alteration, optical illusion, or use in composite form that may occur in taking or usage of any picture or in the subsequent processing or publication of the picture. You release us, the Manager, and our designees from all claims of any nature arising in any way from the use of your photograph or photographic image. This release contains the entire agreement on this subject matter.

  • Spares The Contractor shall ensure that the Contractor’s operational base at the Site is at all times stocked with spare parts for the Contractor's Equipment that meet the requirements of the Contract, together with all necessary or desirable packing and marking for that purpose and that such spare parts are sufficient to ensure that the Work /services can continue in the event of failure of the Contractor’s Equipment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!