Guaranteed Replacement Warranty Sample Clauses

Guaranteed Replacement Warranty. For Equipment, purchased from TPx, TPx will replace any failed devices for as long as Customer maintains its associated TPx services, Customer’s account remains in good standing, TPx has reasonable access to replacement Equipment, and Customer returns the Equipment in accordance with the terms stated within the manufacturer warranty. The replacement item may be a new or reconditioned device of equal or comparable value. The TPx Guaranteed Replacement Warranty starts when Equipment is delivered to Customer, lasts for the duration Customer maintains an associated TPx service, and overlaps the manufacturer's warranty. It covers accidental damage, liquid damage, or any Equipment defect. Associated shipping and/or Service Order Fees may apply.
AutoNDA by SimpleDocs
Guaranteed Replacement Warranty. For Equipment rented from TPx, TPx will replace any failed Equipment for the duration of the rental period, provided Customer’s account remains in good standing, TPx has reasonable access to replacement Equipment, and Customer returns the Equipment in accordance with the terms stated within the manufacturer warranty, The replacement Equipment may be new or reconditioned Equipment of equal or comparable value. The TPx Guaranteed Replacement Warranty starts when Equipment is delivered to Customer, lasts for the duration of the rental period, and overlaps the manufacturer's warranty. It covers accidental damage, liquid damage, or any equipment defect. Associated shipping fees may apply.

Related to Guaranteed Replacement Warranty

  • Prior Payment of Guaranteed Obligations In any proceeding under any Bankruptcy Law relating to any other Loan Party, each Guarantor agrees that the Secured Parties shall be entitled to receive payment in full in cash of all Guaranteed Obligations (including all interest and expenses accruing after the commencement of a proceeding under any Bankruptcy Law, whether or not constituting an allowed claim in such proceeding (“Post Petition Interest”)) before such Guarantor receives payment of any Subordinated Obligations.

  • Limitation on Guaranteed Obligations Each Guarantor and each Secured Creditor (by its acceptance of the benefits of this Guaranty) hereby confirms that it is its intention that this Guaranty not constitute a fraudulent transfer or conveyance for purposes of the Bankruptcy Code, the Uniform Fraudulent Conveyance Act of any similar Federal or state law. To effectuate the foregoing intention, each Guarantor and each Secured Creditor (by its acceptance of the benefits of this Guaranty) hereby irrevocably agrees that the Guaranteed Obligations guaranteed by such Guarantor shall be limited to such amount as will, after giving effect to such maximum amount and all other (contingent or otherwise) liabilities of such Guarantor that are relevant under such laws and after giving effect to any rights to contribution pursuant to any agreement providing for an equitable contribution among such Guarantor and the other Guarantors, result in the Guaranteed Obligations of such Guarantor in respect of such maximum amount not constituting a fraudulent transfer or conveyance.

  • Money Back Guarantee If we provide a money back guarantee ("MBG") for your Service, it will begin on your Service Ready Date. During this MBG period you may cancel your Service and receive a full refund of all monthly, one-time and equipment charges paid to Verizon (provided you return all Equipment in good working condition). If you fail to return the Equipment, an unreturned Equipment fee will apply. ETFs will not apply to Service terminated within the MBG period. The MBG does not apply to customers who change between or renew bundle, monthly, term or other pricing plans. The MBG is limited to one per Subscriber per Service type per Service address.

  • Definition of Guaranteed Obligations As used herein, the term “Guaranteed Obligations” means:

  • Warranty Obligations ‌ (a) Project Co represents, warrants and covenants that: (i) the Works shall conform to the requirements of this Project Agreement, Good Industry Practice, Applicable Law and all professional engineering principles generally accepted as standards of the industry in the Province of Ontario; (ii) the Works shall be free of defects, including design defects, errors and omissions; and (iii) materials and equipment shall be of good quality and in compliance with this Project Agreement. (b) During the Warranty Period and subject to Section 11.15(c), Project Co shall promptly, at its sole cost and expense, correct and Make Good all Construction Defects arising in respect of the Works. For greater certainty, Project Co is required to correct and Make Good Construction Defects related to any Product during the applicable Warranty Period despite Project Co having obtained on Contracting Authority’s behalf industry- standard or other equipment warranties in accordance with Section 11.15(f). For all work to correct Construction Defects, the applicable Warranty Period shall be extended for a further two years from the date of the last work completed in respect of such corrective Works. For clarity, any extension of a Warranty Period for the purposes of a correction shall only apply to the relevant Construction Defect and not the Works as a whole.‌ (c) In addition to the obligation to correct and Make Good Construction Defects during the Warranty Period, Project Co shall at its expense correct and Make Good any Construction Defects that could not reasonably have been ascertained by a competent person in accordance with Good Industry Practice during a visual inspection of the‌ Works (“Construction Latent Defect”), provided Contracting Authority gives Project Co written Notice of the Construction Latent Defect within the time frame applicable to such Construction Latent Defect pursuant to the Limitations Act, 2002 (Ontario). (d) The warranties described in this Section 11.15 shall cover labour and material, including, the costs of removal and replacement of covering materials. The warranties shall not limit extended warranties on any Product or item of equipment called for elsewhere in the Output Specifications or otherwise provided by any manufacturer of such Product or equipment. (e) If Project Co fails to correct and Make Good any Construction Defects or Construction Latent Defects in accordance with Sections 11.15(b) and 11.15(c) and in the time period specified in Section 11.16(a) or Section 11.16(b), as applicable, without prejudice to any other right or remedy Contracting Authority may have, Contracting Authority may correct such Construction Defects or Construction Latent Defects at Project Co’s sole cost and expense. (f) Project Co shall obtain warranties from the manufacturers of each of the Products for the duration(s) and in accordance with the applicable requirements specified in the Output Specifications in the name of and to the benefit of both Project Co and Contracting Authority. Where, in respect of a Product warranty, the Output Specifications do not specify a specific duration and/or other requirements, Project Co shall obtain industry-standard warranties from the applicable manufacturers in the name of and to the benefit of Project Co and Contracting Authority which shall extend no less than two years from the Substantial Completion Date. Each Product warranty shall be issued by the applicable manufacturer and delivered to Project Co no later than 30 days prior to the Substantial Completion Date. Project Co shall ensure that each Product warranty, including any Product warranty extended under this Section 11.15(f), is fully assigned to Contracting Authority, at no cost or expense to Contracting Authority, at the end of the Warranty Period, as such Warranty Period may be extended in accordance with Section 11.15(b).‌

  • Repair Obligation If neither party elects to terminate this Lease following a Casualty, then Landlord shall, within a reasonable time after such Casualty, begin to repair the Premises and shall proceed with reasonable diligence to restore the Premises to substantially the same condition as they existed immediately before such Casualty; however, other than building standard leasehold improvements Landlord shall not be required to repair or replace any Alterations or betterments within the Premises (which shall be promptly and with due diligence repaired and restored by Tenant at Tenant’s sole cost and expense) or any furniture, equipment, trade fixtures or personal property of Tenant or others in the Premises or the Building, and Landlord’s obligation to repair or restore the Premises shall be limited to the extent of the insurance proceeds actually received by Landlord for the Casualty in question. If this Lease is terminated under the provisions of this Section 15, Landlord shall be entitled to the full proceeds of the insurance policies providing coverage for all Alterations, improvements and betterments in the Premises (and, if Tenant has failed to maintain insurance on such items as required by this Lease, Tenant shall pay Landlord an amount equal to the proceeds Landlord would have received had Tenant maintained insurance on such items as required by this Lease).

  • Guaranty Obligations Unless otherwise specified, the amount of any Guaranty Obligation shall be the lesser of the principal amount of the obligations guaranteed and still outstanding and the maximum amount for which the guaranteeing Person may be liable pursuant to the terms of the instrument embodying such Guaranty Obligation.

  • Supplier Obligations 7.1 The Supplier shall: 7.1.1 at all times allocate sufficient resources to supply the Services in accordance with the Contract; 7.1.2 provide and fulfil any ancillary or incidental service, function or responsibility not specified in the Service Specification where such service, function or responsibility is necessary for the proper performance of the relevant Services; 7.1.3 obtain, and maintain throughout the duration of the Contract, all the consents, approvals, licences and permissions (statutory, regulatory, contractual or otherwise) it may require and which are necessary for the provision of the Services or performance of any other obligation under this Contract; 7.1.4 ensure the Supplier Assets used in the performance of the Services will be free of all encumbrances (except as agreed in writing with the Authority); 7.1.5 ensure that in the performance of its obligations under the Contract it does not disrupt the operations of each Commissioning Body and their respective Personnel; 7.1.6 ensure that any documentation, information and training provided to each Commissioning Body under this Contract (including in relation to the use of the Website) is comprehensive, accurate and prepared in accordance with Good Industry Practice; 7.1.7 co-operate with the Other Supplier(s) and provide reasonable information (including any documentation), advice and assistance in connection with the Services to the Other Supplier(s) including to enable such Other Supplier(s) to provide services to the respective Commissioning Bodies and, on the expiry or termination of this Contract for any reason, to enable the timely transition of the Services (or any of them) to the respective Commissioning Bodies and/or to any Replacement Supplier; 7.1.8 to the extent it is legally able to do so, hold on trust for the sole benefit of the Authority, all warranties and indemnities provided by third parties or any Sub- contractor in respect of any Deliverables and/or the Services and, where any such warranties are held on trust, at its cost enforce such warranties in accordance with any reasonable directions that the Authority may notify from time to time to the Supplier; 7.1.9 unless it is unable to do so, assign to the Authority on the Authority’s written request and at the cost of the Supplier any such warranties and/or indemnities as are referred to in Clause 7.1.8; 7.1.10 provide each Commissioning Body with such advice and assistance as that Commissioning Body may reasonably require during the Contract Period in respect of the supply of the Services; 7.1.11 gather, collate and provide such information and co-operation as the Authority may reasonably request for the purposes of ascertaining the Supplier’s compliance with its obligations under the Contract; 7.1.12 notify the Authority of any circumstances suggesting that a change of Control of the Supplier is planned, in contemplation or has taken place; 7.1.13 notify the Authority in writing of any material detrimental change in the financial standing and/or any change in the credit rating of the Supplier; 7.1.14 subject to Clause 33.6, notify the Authority in writing within ten (10) Working Days of their occurrence, of any actions, suits or proceedings or regulatory investigations before any court or administrative body or arbitration tribunal pending or, to its knowledge, threatened against it that might affect its ability to perform its obligations under the Contract; and 7.1.15 ensure that neither it, nor any of its Affiliates or Personnel, bring any Commissioning Body into disrepute by engaging in any act or omission which is reasonably likely to diminish the trust that the public places in that Commissioning Body, regardless of whether or not such act or omission is related to the Supplier’s obligations under this Contract.

  • Buyer Obligations During the Delivery Term, Buyer shall arrange and be responsible for transmission service, including risk of transmission outage or curtailment, from the Delivery Point and bear all risks and costs associated with such transmission service, including, but not limited to, any transmission outages or curtailment. During the Delivery Term, Buyer shall Schedule or arrange for Scheduling Coordinator services with its Transmission Providers to receive the Product at the Delivery Point. During the Delivery Term, Buyer shall be responsible for all CAISO costs and charges, electric transmission losses and congestion from the Delivery Point.

  • GUARANTEE CONDITIONS 4.1 The performance certification requirements for the Aircraft, except where otherwise noted, will be as stated in Section 02 of the Standard Specification. 4.2 For the determination of JAR take-off and landing performance a hard dry level runway surface with no runway strength limitations, no line-up allowances, no obstacles, zero wind, atmosphere according to ISA, except as otherwise noted, and the use of speed brakes, flaps, landing gear and engines in the conditions liable to provide the best results will be assumed. 4.2.1 When establishing take-off and second segment performance no air will be bled from the engines for cabin air conditioning or anti-icing.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!