Guidelines for Contractor Conduct While Working In Court Buildings Sample Clauses

Guidelines for Contractor Conduct While Working In Court Buildings. These Guidelines for Contractor Conduct are subject to revision and may be modified by the Court at any time. Contractor will be notified of modifications. (a) Work areas are to be free of all tools, trash, material packaging, etc., and any other discarded items at the end of each shift. Contractors should take their trash with them at the end of each shift, rather than disposing of trash in court containers. (b) All waste, excess materials, tools, etc. shall be removed from the areas upon completion. The areas shall be thoroughly cleaned. (c) If desk items need to be moved, they must be placed back in the same location (including chairs moved to access under desk space). (d) Vacuum all areas paying special attention to all drywall cutouts and/or ceiling tile debris on floor and around work areas at the end of each shift. (e) Use caution when removing and installing ceiling tiles. Any damage resulting in mishandled ceiling tiles will be the responsibility of Contractor to replace. (f) Do not remove any furniture or chairs from any office area. (g) Do not prop open any secure doorways. Access cards will be furnished. (h) Do not modify the adjustments on any chairs or remove any chairs from any area. (i) Do not use any court radio, stereo, or TV. (Contractor’s crew may furnish their own radio. However, volume must be kept at a low level, as judicial and administrative staff often works after hours). (j) Smoking is prohibited in all Court buildings, including any/all restrooms. (k) Do not use any restrooms in judicial xxxxxxxx. Only use common area restrooms. (l) Do not leave company items behind once a job is complete (i.e. ladders and tools). (m) Any furniture moves necessary to complete the work must be indicated during the job walk or pre-project planning. No furniture is to be moved without prior notice to the Court’s Project Manager. (n) For security purposes, do not allow any person(s) into your work area, or into any other Court Building area. Do not open doors to allow person(s) access into your work area, or any other Court Building area. As you go through doors, be sure to securely pull them closed behind you. Don’t let person(s) come through a door along with you.
AutoNDA by SimpleDocs

Related to Guidelines for Contractor Conduct While Working In Court Buildings

  • Proposed Policies and Procedures Regarding New Online Content and Functionality By October 31, 2017, the School will submit to OCR for its review and approval proposed policies and procedures (“the Plan for New Content”) to ensure that all new, newly-added, or modified online content and functionality will be accessible to people with disabilities as measured by conformance to the Benchmarks for Measuring Accessibility set forth above, except where doing so would impose a fundamental alteration or undue burden. a) When fundamental alteration or undue burden defenses apply, the Plan for New Content will require the School to provide equally effective alternative access. The Plan for New Content will require the School, in providing equally effective alternate access, to take any actions that do not result in a fundamental alteration or undue financial and administrative burdens, but nevertheless ensure that, to the maximum extent possible, individuals with disabilities receive the same benefits or services as their nondisabled peers. To provide equally effective alternate access, alternates are not required to produce the identical result or level of achievement for persons with and without disabilities, but must afford persons with disabilities equal opportunity to obtain the same result, to gain the same benefit, or to reach the same level of achievement, in the most integrated setting appropriate to the person’s needs. b) The Plan for New Content must include sufficient quality assurance procedures, backed by adequate personnel and financial resources, for full implementation. This provision also applies to the School’s online content and functionality developed by, maintained by, or offered through a third-party vendor or by using open sources. c) Within thirty (30) days of receiving OCR’s approval of the Plan for New Content, the School will officially adopt, and fully implement the amended policies and procedures.

  • Office of Inspector General Investigative Findings Expert Review In accordance with Senate Bill 799, Acts 2021, 87th Leg., R.S., if Texas Government Code, Section 531.102(m-1)(2) is applicable to this Contract, Contractor affirms that it possesses the necessary occupational licenses and experience.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Quality Improvement VRC shall develop programs designed to improve the quality of care provided by the Radiologists and encourage identification and adoption of best demonstrated processes. Practice and VRC acknowledge that, in connection with such quality improvement activities, it may be necessary to provide VRC with Protected Health Information and Practice and VRC agree to treat such information in accordance with Article 9;

  • PROFESSIONAL DEVELOPMENT AND EDUCATIONAL IMPROVEMENT A. The Board of Education agrees to pay the actual tuition costs of courses taken by a teacher at accredited colleges or universities up to three courses per two (2) year fiscal periods from July 1, 2006 to June 30, 2008 and July 1, 2008 to June 30, 2010 respectively, except as follows: 1. No teacher may be reimbursed for courses taken during the first year of teaching in Vineland. 2. Teachers taking courses in the second and third years of employment in Vineland will not receive remuneration until tenure has been secured. The remuneration will then be retroactive and will be paid to the teacher in a lump sum within sixty (60) days after the teacher has secured tenure. 3. All courses must be pre-approved by the Superintendent or his designee subject to the following requirements: (a) A teacher must provide official documentation that he/she has obtained a grade of B or better; (b) Reimbursement shall be paid only for courses directly related to teacher’s teaching field which increase the teacher’s content knowledge and are related to the teacher’s current certification, as determined by the Superintendent or his/her designee in his/her sole discretion; no reimbursement shall be paid for courses leading to a post graduate or professional degree in a field other than education or teaching. Further, effective September 1, 2010, all newly hired teachers shall not be eligible for reimbursement until they are tenured, and they shall not be eligible for retroactive reimbursement upon gaining tenure for courses taken prior to being tenured. (c) The maximum total payments to be made by the Board shall not exceed $130,000.00. Courses shall be applied for no earlier than the following dates: Summer Session - April 1 Fall/Winter Session - June 1 Spring Session - October 1 Courses must, as set forth hereinabove in this sub-article 18.A.3, be pre-approved by the Superintendent or his designee, prior to the teacher commencing the course(s); and (d) Teacher taking courses shall sign a contract requiring them to reimburse the Board for all tuition paid for a course if the teacher shall voluntarily leave the employ of the Board within one (1) full school/academic year of completion of said course, except that reimbursement shall not be required when the teacher shall voluntarily leave the employ of the Board due to a significant, documented life change. 4. Tuition reimbursement costs shall be a sum not to exceed the actual cost of college credits charged in an accredited public State college/University of the State of New Jersey. B. When the Superintendent initiates in-service training courses, workshops, conferences and programs designed to improve the quality of instruction, the cooperation of the Vineland Education Association will be solicited. Notwithstanding the above, the initiation of in-service training courses, workshops, conferences and programs shall be determined solely at the discretion of the Board. C. One professional leave day may be granted to a teacher upon request, according to the following guidelines: 1. The professional day may be for attendance at a workshop, seminar or visit to another school for the expressed purpose of self professional improvement for the job. 2. The request shall arrive in the office of the Superintendent of Schools at least ten (10) working days prior to the date requested and shall be reviewed by the immediate supervisor prior to submission. The Board reserves the right to deny a professional leave day before or immediately following a holiday or on a day which by its nature suggests a hardship for providing a substitute. 3. No more than two teachers from any one elementary school or from any one department in the secondary schools may be granted a professional leave for a given day. 4. The teacher may be required to submit a report to the Superintendent of Schools, Assistant Superintendent, supervisor (s), principal and staff regarding the activity of the professional day. 5. Costs incurred by the teacher for the professional day authorized under this Section shall be the teacher’s responsibility. 6. A maximum of 90 professional leave days may be authorized for the school year which shall be apportioned as follows: elementary, 35; grades seven and eight, 20; and high school, 35. D. If the Board initiates a teacher’s attendance at a professional workshop, seminar or visit, the expenses shall be the responsibility of the Board. Further, this day shall not be subtracted from the 90 professional leave days granted to teachers of the Association. E. The Board agrees to pay the full cost of courses taken by secretaries related to skills and knowledge improvement when such courses are required and approved by the Board. F. The Board and the Association agree that it is important to communicate when developing and implementing current and future learning technologies, including but not limited to distance and on-line learning.

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

  • PARKING RULES AND REGULATIONS The following rules and regulations govern the use of the parking facilities which serve the Building. Tenant will be bound by such rules and regulations and agrees to cause its employees, subtenants, assignees, contractors, suppliers, customers and invitees to observe the same: 1. Tenant will not permit or allow any vehicles that belong to or are controlled by Tenant or Tenant’s employees, subtenants, customers or invitees to be loaded, unloaded or parked in areas other than those designated by Landlord for such activities. No vehicles are to be left in the parking areas overnight and no vehicles are to be parked in the parking areas other than normally sized passenger automobiles, motorcycles and pick-up trucks. No extended term storage of vehicles is permitted. 2. Vehicles must be parked entirely within painted stall lines of a single parking stall. 3. All directional signs and arrows must be observed. 4. The speed limit within all parking areas shall be five (5) miles per hour. 5. Parking is prohibited: (a) in areas not striped for parking; (b) in aisles or on ramps; (c) where “no parking” signs are posted; (d) in cross-hatched areas; and (e) in such other areas as may be designated from time to time by Landlord or Landlord’s parking operator. 6. Landlord reserves the right, without cost or liability to Landlord, to tow any vehicle if such vehicle’s audio theft alarm system remains engaged for an unreasonable period of time. 7. Washing, waxing, cleaning or servicing of any vehicle in any area not specifically reserved for such purpose is prohibited. 8. Landlord may refuse to permit any person to park in the parking facilities who violates these rules with unreasonable frequency, and any violation of these rules shall subject the violator’s car to removal, at such car owner’s expense. Tenant agrees to use its best efforts to acquaint its employees, subtenants, assignees, contractors, suppliers, customers and invitees with these parking provisions, rules and regulations. 9. Parking stickers, access cards, or any other device or form of identification supplied by Landlord as a condition of use of the parking facilities shall remain the property of Landlord. Parking identification devices, if utilized by Landlord, must be displayed as requested and may not be mutilated in any manner. The serial number of the parking identification device may not be obliterated. Parking identification devices, if any, are not transferable and any device in the possession of an unauthorized holder will be void. Landlord reserves the right to refuse the sale of monthly stickers or other parking identification devices to Tenant or any of its agents, employees or representatives who willfully refuse to comply with these rules and regulations and all unposted city, state or federal ordinances, laws or agreements. 10. Loss or theft of parking identification devices or access cards must be reported to the management office in the Development immediately, and a lost or stolen report must be filed by the Tenant or user of such parking identification device or access card at the time. Landlord has the right to exclude any vehicle from the parking facilities that does not have a parking identification device or valid access card. Any parking identification device or access card which is reported lost or stolen and which is subsequently found in the possession of an unauthorized person will be confiscated and the illegal holder will be subject to prosecution. 11. All damage or loss claimed to be the responsibility of Landlord must be reported, itemized in writing and delivered to the management office located within the Development within ten (10) business days after any claimed damage or loss occurs. Any claim not so made is waived. Landlord is not responsible for damage by water or fire, or for the acts or omissions of others, or for articles left in vehicles. In any event, the total liability of Landlord, if any, is limited to Two Hundred Fifty Dollars ($250.00) for all damages or loss to any car. Landlord is not responsible for loss of use.

  • Common Areas - Rules and Regulations Lessor or such other person(s) as Lessor may appoint shall have the exclusive control and management of the Common Areas and shall have the right, from time to time, to establish, modify, amend and enforce reasonable rules and regulations (“Rules and Regulations”) for the management, safety, care, and cleanliness of the grounds, the parking and unloading of vehicles and the preservation of good order, as well as for the convenience of other occupants or tenants of the Building and the Project and their invitees. Lessee agrees to abide by and conform to all such Rules and Regulations, and to cause its employees, suppliers, shippers, customers, contractors and invitees to so abide and conform. Lessor shall not be responsible to Lessee for the non-compliance with said Rules and Regulations by other tenants of the Project.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!