Common use of ILLUMINATION DESIGN Clause in Contracts

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32-D279-4718-B36E-004C4194E751 DocuSign Envelope ID: 33059790-9D6A-4832-8E47-37328128C4A4 Contract No. 36-6IDP5430 PeopleSoft Contract No. 5682 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32F2FBC84C-D279FAF2-471848EB-B36E-004C4194E751 B372-AE084F522D98 DocuSign Envelope ID: 33059790FF5C91A2-9D6A-4832ECF2-8E4741F9-37328128C4A4 B9A9-7A5C5F04D96D Contract No. 36-6IDP5430 6IDP5370 PeopleSoft Contract No. 56825685 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32FDEAC86F-5E2C-4774-D27980F7-4718-B36E-004C4194E751 D16ABCDC6AED DocuSign Envelope ID: 33059790BD8C3DAD-658B-42FA-9D6A-4832BFD0-8E47-37328128C4A4 FFECD08D31CF Contract No. 36-6IDP5430 6IDP5371 PeopleSoft Contract No. 56825690 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32D3D960FD-D279BE0E-44B3-4718803B-B36E-004C4194E751 B86D69AFA793 DocuSign Envelope ID: 33059790D1D750F4-9D6A-4832C3E4-8E474ADA-8F53-37328128C4A4 8D32970E4F27 Contract No. 36-6IDP5430 6IDP5364 PeopleSoft Contract No. 56825689 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D3204C16B52-D2796FE2-47184CCA-85E1-B36E-004C4194E751 65F1BBF3295C DocuSign Envelope ID: 330597904ADCA196-9D6A-4832070B-414B-84B9-8E47-37328128C4A4 71706552ABDA Contract No. 36-6IDP5430 6IDP5366 PeopleSoft Contract No. 56825681 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32D3D386F2-D2799BB1-471846C4-B36E-004C4194E751 A6B5-298DBCC339A1 DocuSign Envelope ID: 33059790289281F7-9D6A-483243A6-8E474F0C-37328128C4A4 BC8B-BFB572B13384 Contract No. 36-6IDP5430 6IDP5376 PeopleSoft Contract No. 56825675 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.

ILLUMINATION DESIGN. The Engineer shall perform field work and analysis necessary to design illumination plans for designated locations and /or sections of roadways. The Engineer shall: a. Perform field work that may include but not be limited to taking measurements, locating utilities, locating existing illumination equipment, identifying existing conditions, and taking digital photos of the locations. b. Prepare layouts for safety and/or continuous illumination design according to current State specifications, district format, and approved city preferences. c. For high mast lighting, prepare photometric data layout and submit for review and approval before detail design. d. For high mast lighting, submit Federal Aviation Administration (FAA) study request and obtain FAA determination for each pole. e. Prepare PS&E Package in accordance with the applicable requirements of the State’s Specifications and Manuals (latest revision) as provided by the State and available on the State’s website. f. Provide copies of the illumination design layouts. DocuSign Envelope ID: 0FF49D32BC9C016B-5A52-D27945C4-4718B28D-B36E-004C4194E751 A91989A94E2D DocuSign Envelope ID: 33059790DEE8D1E1-9D6A-4832E43A-4EEA-8FC1-8E47-37328128C4A4 F207966DDF38 Contract No. 36-6IDP5430 6IDP5368 PeopleSoft Contract No. 56825683 g. Contact the local utility company to confirm electrical power for illumination equipment and identify conflicts with overhead and underground utility lines. Obtain meter address from City. Identify utility company, contact person, and phone number on plans. h. Perform revisions to the plans due to any comments received from the State and the City. i. Verify that proposed illumination work meets the requirements of the National Electrical Code and the TxDOT Highway Illumination Manual. j. Provide copies of the PS&E Package. k. Provide electronic files of the design and PS&E Package.