Interstate Projects Sample Clauses

Interstate Projects. On all interstate projects with an estimated construction cost of greater than $1 million, all project activities shall receive full oversight and approval by the Federal Highway Administration. For all major bridge or intelligent transportation system projects, regardless of cost, the Federal Highway Administration will continue full oversight and approval. In addition, traffic control plans for all interstate projects will be provided to the Federal Highway Administration for review. This oversight responsibility is a continuation of the principles included in the Missouri 1993 Stewardship Agreement and as allowed by Section 1 06(c)(4) of Title 23 U.S.C. as amended by TEA-21. Non-Interstate National Highway System Projects – MoDOT assumes oversight responsibility for all non-interstate National Highway System projects, regardless of the federal funding source. However, this does not include major bridge or intelligent transportation system projects that will continue to receive full oversight and approval by the Federal Highway Administration. In addition, the Federal Highway Administration will be given the opportunity to participate on MoDOT project management teams to insure that timely input and technical assistance are provided to achieve quality project development. Non-National Highway System Projects - MoDOT assumes oversight responsibility for all non-National Highway System projects, regardless of project cost, type of work, size, or federal funding source. This oversight responsibility includes federal-aid projects awarded for construction and administered under a local public agency agreement. This oversight responsibility is a continuation of the principles included in the Missouri 1993 Stewardship Agreement and as allowed by Section 106(c)(4) of Title 23 U.S.C. as amended by TEA-21.
AutoNDA by SimpleDocs
Interstate Projects. On New Construction/Reconstruction, Resurfacing, Rehabilitation or Restoration (4R) projects (including Non-Preventative Maintenance Projects) with a total construction cost of greater than $1 million, all project activities shall be developed with full FHWA oversight and approval according to Section 106 of Title 23 U.S.C. On all 4R projects with a total construction cost less than $1 million, INDOT will assume all responsibilities in accordance with Section 106 of Title 23; however, FHWA retains preliminary plan approval of Type, Size and Location (TS&L) responsibility for all major and unusual bridges and structures on the National Highway System (NHS) as defined in FHWA Order 5520.1. For Resurfacing, Rehabilitation or Restoration (3R) projects on the Interstate with a construction cost greater than $5 million dollars, INDOT will consult with FHWA to determine the appropriate level of oversight responsibility. All 3R projects on the Interstate less than $5 million dollars, INDOT will assume all responsibilities in accordance with Section 106 of Title 23; however, FHWA retains preliminary plan approval of Type, Size and Location (TS&L) responsibility for all major and unusual bridges and structures on the National Highway System (NHS) as defined in FHWA Order 5520.1.

Related to Interstate Projects

  • Sub-projects 1. The Participating Bank shall make Sub-loans to Beneficiaries and appraise, review, approve, and supervise Sub-projects in accordance with the criteria, conditions and procedures set forth in the Operations Manual, including, inter alia, the following eligibility criteria:

  • Infrastructure Improvements The design, redevelopment and construction and completion of certain infrastructure improvements, including sewer, stormwater, electrical and water main improvements, along with other similar improvements.

  • PROJECT 3.01. The Recipient declares its commitment to the objectives of the Project. To this end, the Recipient shall carry out the Project in accordance with the provisions of Article IV of the General Conditions.

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and VarTec, VarTec shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks and the Entrance Facility, on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs.

  • Interconnection 2.1.10 Startup Testing and Commissioning

  • One-Way Interconnection Trunks 2.3.1 Where the Parties have agreed to use One-Way Interconnection Trunks for the delivery of traffic from PCS to Verizon, PCS, at PCS’s own expense, shall:

  • The Project The Project is the total construction of which the Work performed under the Contract Documents may be the whole or a part.

  • Construction Development of the Project The Allottee has seen the proposed layout plan/demarcation-cum-zoning/sanctioned plans, / site plan / building plan, specifications, amenities and facilities, etc. depicted in the advertisement / brochure / agreement / website (as the case may be) regarding the Project where the Said Independent Floor for residential usage along with parking is located and has accepted the floor / site plan, Payment Plan and the specifications, amenities, facilities, etc. [annexed along with this Agreement] which has been approved by the competent authority, as represented by the Promoter. The Promoter shall develop the Project in accordance with the bye-laws such as Haryana Building Code, 2017, FAR, density norms, provisions prescribed, approved plans, terms and condition of the license/ allotment as well as registration of RERA, etc. Subject to the terms in this Agreement, the Promoter undertakes to strictly abide by such plans approved by the competent authorities and shall also strictly abide by the provisions and norms prescribed by the relevant State laws and shall not have an option to make any variation/ alteration/ modification in such plans, other than in the manner provided under the Act and Rules made thereunder or as per approvals/instructions/ guidelines of the competent authorities, and any breach of this term by the Promoter shall constitute a material breach of the Agreement.

  • In-Scope Projects Project Based Information Technology (IT) Consulting Services required by an Authorized User must be obtained via a Mini-Bid process under this Contract. The Authorized User shall issue a Mini-Bid with a SOW for the required Project Based IT Consulting Services. A Mini-Bid may include, but will not be limited to, projects requiring: analysis, data classification, design, development, testing, quality assurance, security and associated customized training for IT based applications. Additional examples of in-scope projects include, but are not limited to:  Technical architecture advisory services;  Business analysis for project development;  Proprietary software application development/customization, programming and integration;  Data information management (including data migration, data conversion, data manipulation, data integration);  Project management project support services - including, but not limited to; project management, project quality assurance and control, and Independent Verification & Validation (IV&V);  Disaster recovery/business continuity and testing;  Quality assurance;  Continuity of operations planning (COOP);  Data categorization; and  Open-source software implementation. Out-of-Scope Work There are service offerings expressly excluded from the scope of these contracts. In many instances, such services and/or offerings are (or will be) covered by another OGS Centralized Contract. Examples include:  Staff augmentation services;  Time and material services;  Web hosting;  Automated network monitoring or any other service provided principally through an automated process;  Hardware maintenance and support;  Software maintenance and support;  Ongoing maintenance and support;  Services priced on a per asset basis;  Services priced on a contingency basis;  Equipment maintenance;  Prepackaged training courses;  E-Learning;  Managed services;  Acquisition of equipment (hardware)  Acquisition of software, either Commercial off-the-shelf (COTS) software or pre-existing software;  Acquisition of non-consulting services, such as network provisioning, voice services (local, long- distance), or video bridging;  Cloud based or “As a Service” offerings, including but not limited to SaaS, IaaS, PaaS, and XaaS;  Any offering that is a combination of equipment, hardware, software, cloud or “as a service offerings”; and  Consulting or other installation work which is considered Public Works is excluded from purchase under the scope of this Contract. Historically, the New York State Bureau of Public Works has maintained that installation, maintenance and repair of equipment attached to any wall, ceiling or floor or affixed by hard wiring or plumbing is public work. In contrast, installation of a piece of equipment which is portable or a “plug-in” free-standing unit would not be considered public work. Thus, this Contract does not authorize installation where the equipment becomes a permanent part of the building structure, or is otherwise incorporated into the fabric of the building (i.e. installation on a wall, ceiling or floor in a fixed location, or affixed by hard- wiring or plumbing). See Appendix A, Clause 6, Wage and Hours Provisions. For questions about whether a proposed work constitutes public work, please contact the New York State Department of Labor’s Bureau of Public Work District Office in a specific area. A listing of district offices and contact information is available at xxxx://xxx.xxxxx.xx.xxx/workerprotection/publicwork/PWContactUs.shtm. Definitions Additional definitions applicable to this Contract can be found in Appendix B. Term Definition Authorized User Agreement The document resulting from the transactional Mini-Bid process, which sets forth the specifics regarding the services to be provided by the Contractor to the Authorized User, under the Project Based Information Technology Consulting Contract. Best Value The basis for awarding all service and technology contracts to the offerer that optimizes quality, cost and efficiency, among responsive and responsible offerers. Such basis shall be, wherever possible, quantifiable (State Finance Law §163 (1) (j)). Billing Contact The name, phone number, e-mail, and billing address a customer uses on a xxxx for contact information. Consultant Disclosure Legislation Chapter 10 of the Laws of 2006 amends State Finance Law § 8 and § 163 by requiring: that the Office of the State Comptroller (OSC) include in the Consulting Services Report it compiles annually on contracts issued by state agencies for consulting services during the previous fiscal year. xxxx://xxx.xxx.xxxxx.xx.xx/agencies/guide/MyWebHelp/Content/XI/18/C.htm Deliverables All services or products created during the performance or provision of Services hereunder or identified as a “Deliverable” in an applicable Mini-Bid. A Deliverable is a building block of an overall project. For the purposes of this Solicitation and the resulting Contract, a deliverable shall not be set forth as a status report, meeting attendance, a block of staff hours, or an invoice submission. Fixed Price Authorized User Agreement An agreement pursuant to the Centralized Contract that provides for a fix cost for a defined project. Government Contract A contract let by a Federal, State, or Local governmental body within the continental United States. Government Entity An entity at the federal, state, county, city or provincial level. Joint Venture A contractual agreement joining together two or more business enterprises for the purpose of performing on a State Contract. Knowledge Transfer The transfer of knowledge from the Contractor to the Authorized User. Knowledge Transfer can include full written system documentation including all system changes, training classes, manuals and other items. Depending on the scope of the transaction, there may or may not be a deliverable cost associated. All materials will be the property of the Authorized User unless specifically negotiated during the award process. May Denotes the permissive in a contract clause or specification. Refers to items or information that the State has deemed are worthy of obtaining, but not required or obligatory. Also see “Should”. Mini-Bid A type of Bid Document used by the Authorized User to obtain Services under the Project Based IT Consulting Services Contracts. Not To Exceed Rates (NTE) Refers to the New York State contract price set forth in Appendix D. Amounts proposed by the Contractor at the transactional level shall not exceed the hourly rates provided under this Contract (which will be defined values in US Dollars). Prime Contractor For the purposes of Technical qualifications, the business entity with whom a government entity directly has a contract. Project Based IT Consulting Services An OGS Centralized Contract which will provide a set of standardized terms and conditions, guidelines, processes, and templates for the development, distribution and award of specific deliverable-based and fixed-price Information Technology projects. Project Plan A formal, approved document used to guide both project execution and project control. The primary uses of the project plan are to document planning assumptions and decisions, facilitate communication among stakeholders, and document approved scope, cost, and schedule baselines. Retainage A portion of the Authorized User and Contractor fixed-price agreement amount that is held back by the Authorized User until the deliverable or project is satisfactorily finished. Should Denotes the permissive in a contract clause or specification. Refers to items or information that the State has deemed are worthy of obtaining, but not required or obligatory. Also see “May”. Term Definition Solicitation A non-competitive periodic recruitment solicitation (“Solicitation”) for vendors that provide Project Based Information Technology Consulting Services. Vendor An enterprise that sells goods or services. Vendor Submission The complete response to this Solicitation submitted by a Vendor to provide, as applicable , the Product and services described in the Solicitation

  • Participating TO’s Interconnection Facilities The Participating TO shall design, procure, construct, install, own and/or control the Participating TO’s Interconnection Facilities described in Appendix A at the sole expense of the Interconnection Customer. Unless the Participating TO elects to fund the capital for the Participating TO’s Interconnection Facilities, they shall be solely funded by the Interconnection Customer.

Time is Money Join Law Insider Premium to draft better contracts faster.