Equity Transfer 1.1 Party B agrees to transfer the Relevant Equity Interest to Party A with each of the Party B transferring the all of the registered capital as set forth in the Attachment A. Party A agrees to accept such transfer. After the closing of the transfer, Party A is to hold a 100% equity stake in Party B.
1.2 As the consideration for the equity transfer, Party A shall pay each of the Party B the number of RMB Yuan setting forth in the Attachment A pursuant to Article A.
1.3 Party B agrees to the Equity Transfer under this Article, and is willing to and shall procure the other shareholders (other than Party B) of Party C to be willing to sign necessary documents including resolutions of shareholders’ meeting and letters on waiver of preemptive right to acquire the Relevant Equity Interest in respect thereof and assist in completing other necessary formalities for the Equity Transfer.
1.4 Party B and Party C shall be jointly and separately responsible for taking necessary actions, including but not limited to signing this Agreement, adopting the resolutions of shareholders’ meeting and the amendments to the articles of association etc., in order to achieve the transfer of equity interest from Party B to Party A, and responsible for completing all governmental approval or industrial and commercial registration formalities within ten working days from the sending of the notice of exercise by Party A in accordance with the provisions of the Equity Option Agreement to make Party A become the registered owner of such equity interest in the register.
License Transfer Customer may not sublicense, assign, transfer, rent or lease the software or software license except as permitted by HP. HP-branded software licenses are generally transferable subject to HP’s prior written authorization and payment to HP of any applicable fees. Upon such transfer, Customer’s rights shall terminate and Customer shall transfer all copies of the software to the transferee. Transferee must agree in writing to be bound by the applicable software license terms. Customer may transfer firmware only upon transfer of associated hardware.
Technology Transfer (a) Sublicensee acknowledges and agrees that ECC has delivered and made to Sublicensee a disclosure of a general introduction to the Technology and to its commercial feasibility prior to the execution of this Agreement. Except to the extent such information falls within one or more of the exceptions to the definition of "Confidential Information", all information disclosed by ECC to Sublicensee prior to the execution of this Agreement shall be deemed to constitute part of the Technology and shall be deemed to be confidential. The timing and extent of additional disclosure by ECC to Sublicensee shall be as set forth in subparagraph 22(b) hereof.
(b) Upon execution of this Agreement, ECC shall provide Sublicensee with copies of the patents listed in Section B of Exhibit "B" hereto. Beyond that, ECC shall not be required to provide additional information concerning, or disclosure of, the Technology to Sublicensee until Sublicensee provides to ECC (i) written notice of Sublicensee's intent to commercialize a Product, which written notice shall include detailed specifications for the designated Product, and (ii) evidence, reasonably satisfactory to ECC, of Sublicensee's intent to commercialize the designated Product in the form of written documentation of orders placed by Sublicensee of the equipment needed by Sublicensee to produce and commercialize the designated Product or in the form of written documentation from Sublicensee confirming the dedication and/or modification of existing equipment necessary to produce the designated Product. Within ninety (90) days after ECC's receipt of the items described in the preceding sentence, ECC shall provide to Sublicensee the following additional disclosure: (w) a Product specific recipe for the production of the designated Product; (x) Product specific process specifications for the production of the designated Product; (y) copies of all patent applications listed in the Exhibits hereto that ECC deems relevant to the production of the designated Product; and (z) a list of known raw materials suppliers and preferred equipment vendors.
Valid Transfer This Agreement or, in the case of Additional Accounts, the related Assignment constitutes a valid sale, transfer and assignment to the Trust of all right, title and interest of the Seller in the Receivables and the Collateral Security and the proceeds thereof and all of the Seller's rights, remedies, powers and privileges with respect to the Receivables under the Receivables Purchase Agreement and, upon the filing of the financing statements described in Section 2.01 with the Secretary of State of the State of Delaware and, in the case of the Receivables hereafter created and the proceeds thereof, upon the creation thereof, the Trust shall have a first priority perfected ownership interest in such property, subject to the rights of the Purchased Receivables Owners in any Collateral Security in respect of the Partial Accounts (other than the Vehicles relating to Principal Receivables arising in the Partial Accounts), except for Liens permitted under the Receivables Purchase Agreement. Except as otherwise provided in this Agreement and except for Liens permitted under the Receivables Purchase Agreement or the other Transaction Documents, neither the Seller nor any Person claiming through or under the Seller has any claim to or interest in the Collateral of the Trust. The representations and warranties set forth in this Section 2.03 shall survive the transfer and assignment of the Receivables to the Trust and the issuance of the Notes. Upon discovery by the Seller, the Servicer, the Trust, the Owner Trustee, any Agent or the Trustee of a breach of any of the foregoing representations and warranties, the party discovering such breach shall give prompt written notice to the other parties specified above, and to any Enhancement Providers. In the event of any breach of any of the representations and warranties set forth in this Section 2.03 having a material adverse effect on the interests of the Noteholders, then either the Trustee or the Holders of Notes evidencing not less than a majority of the aggregate Outstanding Dollar Principal Amount of all Notes, by notice then given in writing to the Seller (and to the Trustee, the Trust, any Enhancement Providers and the Servicer if given by the Noteholders), may direct the Seller to purchase the Noteholders' Interest within 60 days of such notice (or within such longer period as may be specified in such notice), and the Seller shall be obligated to make such purchase on a Payment Date occurring within such 60-day period on the terms and conditions set forth below; provided, however, that no such purchase shall be required to be made if, by the end of such 60-day period (or such longer period as may be specified), the representations and warranties set forth in this Section 2.03 shall be satisfied in all material respects, and any material adverse effect on the Noteholders' Interest caused thereby shall have been cured. The Seller shall deposit in the Collection Account in immediately available funds on the Business Day preceding such Payment Date, in payment for such purchase of the Noteholders' Interest, the Reassignment Amount for such Payment Date. Notwithstanding anything to the contrary in this Agreement, such amounts deposited in the Collection Account shall be applied in accordance with Section 706 of the Indenture and shall be allocated pro rata among the then-outstanding Series based on their respective Series Nominal Liquidation Amounts. If the Trustee or the Noteholders give notice directing the Seller to purchase the Noteholders' Interest as provided above, the obligation of the Seller to purchase the Noteholders' Interest pursuant to this Section 2.03 shall constitute the sole remedy respecting an event of the type specified in the first sentence of this Section 2.03 available to the Noteholders (or the Trustee on behalf of the Noteholders).
REAL ESTATE LICENSE HOLDERS A BROKER is responsible for all brokerage activities, including acts performed by sales agents sponsored by the broker. • A SALES AGENT must be sponsored by a broker and works with clients on behalf of the broker. • Put the interests of the client above all others, including the broker’s own interests; • Inform the client of any material information about the property or transaction received by the broker; • Answer the client’s questions and present any offer to or counter-offer from the client; and • Treat all parties to a real estate transaction honestly and fairly.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Permitted License Transfers As Licensee’s business operations may be altered, expanded or diminished, licenses granted hereunder may be transferred or combined for use at an alternative or consolidated site not originally specified in the license, including transfers between Agencies (“permitted license transfers”). Licensee(s) do not have to obtain the approval of Contractor for permitted license transfers, but must give thirty (30) days prior written notice to Contractor of such move(s) and certify in writing that the Product is not in use at the prior site. There shall be no additional license or other transfer fees due Contractor, provided that: i) the maximum capacity of the consolidated machine is equal to the combined individual license capacity of all licenses running at the consolidated or transferred site (e.g., named users, seats, or MIPS); or ii) if the maximum capacity of the consolidated machine is greater than the individual license capacity being transferred, a logical or physical partition or other means of restricting access will be maintained within the computer system so as to restrict use and access to the Product to that unit of licensed capacity solely dedicated to beneficial use for Licensee. In the event that the maximum capacity of the consolidated machine is greater than the combined individual license capacity of all licenses running at the consolidated or transferred site, and a logical or physical partition or other means of restricting use is not available, the fees due Contractor shall not exceed the fees otherwise payable for a single license for the upgrade capacity.
Sublicense SONY shall be permitted to sublicense the rights ---------- granted in Section
2.1 only to:
(a) wholly-owned subsidiaries of SONY; provided that SONY shall promptly notify LEXAR in writing of sublicenses granted to subsidiaries and SONY shall acknowledge responsibility for such subsidiary's compliance with the terms of this Lexar Technology License Agreement; and
(b) any parties for the manufacture, use, offer for sale, import and sale of Host Devices and any components of Host Devices, provided that such third parties shall only be sublicensed under LEXAR Intellectual Property Rights for that portion of a Host Device or of any component of a Host Device that communicates directly with a Licensed Memory Stick. SONY's sublicense rights under this Section 2.2(b) shall be contingent upon SONY entering into a written agreement with each sublicensee in the form of Exhibit C. SONY will provide LEXAR with a copy of each such --------- sublicense agreement immediately after execution thereof. Nothing in this Agreement shall be construed as permitting SONY to reveal LEXAR Confidential Information, as such term is defined in Section 6, to sublicensees under this Section 2.2(b). In the event that SONY determines that the Memory Stick Specification contains LEXAR Confidential Information, LEXAR and SONY agree to negotiate in good faith additional specific provisions to the form sublicensee agreement to sufficiently protect LEXAR's Confidential Information. LEXAR and SONY acknowledge that in the course of these negotiations, the parties' mutual interest in making the Host Device manufacturing license available as broadly as possible should be weighed against the importance of protecting LEXAR's Confidential Information. Sublicensees under this Section 2.2 shall not have the right to sublicense the rights granted under this agreement. * Material has been omitted and filed separately with the Commission.
Freedom to Trade in Company Securities The Rights Agent and any stockholder, director, officer or employee of the Rights Agent may buy, sell or deal in any of the Rights or other securities of the Company or become pecuniarily interested in any transaction in which the Company may be interested, or contract with or lend money to the Company or otherwise act as fully and freely as though it were not Rights Agent under this Agreement. Nothing herein shall preclude the Rights Agent from acting in any other capacity for the Company or for any other legal entity.
Sublicensing Licensee has the right to grant Sublicense Agreements under the Licensed Subject Matter consistent with the terms of the Agreement, subject to the following:
(a) A Sublicense Agreement shall not exceed the scope and rights granted to Licensee hereunder. Sublicensee must agree in writing to be bound by the applicable terms and conditions of the Agreement and shall indicate that Licensor is a third party beneficiary of the Sublicense Agreement. In the event of termination of this Agreement, continued sublicense rights shall be governed by Section 7.5(a) (Effect of Termination). Licensee has no right to grant a Sublicensee the right to grant further sub-Sublicense Agreements.
(b) Licensee shall deliver to Licensor a true, complete, and correct copy of each Sublicense Agreement granted by Licensee, Affiliate or Sublicensee, and any modification or termination thereof, within thirty (30) days following the applicable execution, modification, or termination of such Sublicense Agreement. All Sublicense Agreements will be in English.
(c) Notwithstanding any such Sublicense Agreement, Licensee will remain primarily liable to Licensor for all of the Licensee’s duties and obligations contained in the Agreement, including without limitation the payment of running royalties due under Section 3.2 whether or not paid to Licensee by a Sublicensee. Any act or omission of a Sublicensee that would be a breach of the Agreement if performed by Licensee will be deemed to be a breach by Licensee. Each Sublicense Agreement will contain a right of termination by Licensee in the event that the Sublicensee breaches the payment or reporting obligations affecting Licensor or any other terms and conditions of the Sublicense Agreement that would constitute a breach of the Agreement if such acts were performed by Licensee.
