Voting Procedure The Trust shall be authorized to solicit, and a Shareholder shall be entitled to submit a proxy ballot containing the voting instructions of such Shareholder, in person, or by U.S. mail, overnight mail, express mail, telephone, electronic mail, telefacsimile, telegraph, internet or other electronic media, provided however, that the Sponsor or an officer of the Trust may limit or delineate the types of media and methods by which a Shareholder may submit voting instructions. On any matter any Shareholder may vote part of the shares in favor of the proposal and refrain from voting the remaining shares or vote them against the proposal, but if the Shareholder fails to specify the number of shares which the Shareholder is voting affirmatively, it will be conclusively presumed that the Shareholder’s approving vote is with respect to the total shares that the Shareholder is entitled to vote on such proposal.
Voting Procedures Subject to the cost allocation procedures set forth in Section 3 hereof, LIFE COMPANY will distribute all proxy material furnished by AVIF to Participants to whom pass-through voting privileges are required to be extended and will solicit voting instructions from Participants. LIFE COMPANY will vote Shares in accordance with timely instructions received from Participants. LIFE COMPANY will vote Shares that are (a) not attributable to Participants to whom pass-through voting privileges are extended, or (b) attributable to Participants, but for which no timely instructions have been received, in the same proportion as Shares for which said instructions have been received from Participants, so long as and to the extent that the SEC continues to interpret the 1940 Act to require pass through voting privileges for Participants. Neither LIFE COMPANY nor any of its affiliates will in any way recommend action in connection with or oppose or interfere with the solicitation of proxies for the Shares held for such Participants. LIFE COMPANY reserves the right to vote shares held in any Account in its own right, to the extent permitted by law. LIFE COMPANY shall be responsible for assuring that each of its Accounts holding Shares calculates voting privileges in a manner consistent with that of other Participating Insurance Companies or in the manner required by the Mixed and Shared Funding exemptive order obtained by AVIF. AVIF will notify LIFE COMPANY of any changes of interpretations or amendments to Mixed and Shared Funding exemptive order it has obtained. AVIF will comply with all provisions of the 1940 Act requiring voting by shareholders, and in particular, AVIF either will provide for annual meetings (except insofar as the SEC may interpret Section 16 of the 1940 Act not to require such meetings) or will comply with Section 16(c) of the 1940 Act (although AVIF is not one of the trusts described in Section 16(c) of that Act) as well as with Sections 16(a) and, if and when applicable, 16(b). Further, AVIF will act in accordance with the SEC's interpretation of the requirements of Section 16
(a) with respect to periodic elections of directors and with whatever rules the SEC may promulgate with respect thereto.
Bidding Process 3.1. Bidding shall generally commence based on the sequence of the lot being shown on the PAH Website. However the Auctioneer has the right to vary the sequence without having to give prior notice to the intended bidders.
3.2. It shall be the responsibilities of the E-bidders to login through PAH website to wait for the turn to bid for the property lot in which they intend to bid.
3.3. The Auctioneer has the discretion to set a new reserve price in the event that there is more than one (1) registered bidder.
3.4. The amount of incremental bid will appear on the website prior to the commencement of the auction.
3.5. Registered online Bidders shall start bidding online by pressing the BID Button using their own gadgets with internet connection. If your bid is the highest, it will be denoted by a Green Coloured Box otherwise it will be a Red Coloured Box The highest bid shall flash 10 seconds (subject to change) interval for four (4) times " Calling Once, Calling Twice, Last Call and Sold". E-bidders may submit their bid at any of these stages of biddings by pressing the BID button. The successful bidder's bid will be denoted by a green coloured screen. The highest bidder shall be declared as the successful purchaser upon the fall of the hammer.
3.6. In the event that there is no bid after forty(40) seconds from the time of commencement of the auction, the auction shall be aborted.
3.7. Any bid once entered by the registered online E-bidders shall be binding and the bid shall not be withdrawn or retracted in any manner whatsoever after the fall of the hammer.
3.8. Both the successful and unsuccessful bidders will be notified by the Auctioneer through the website and also via E-mail where further directions are given in order to conclude the sale of the auction property.
3.9. In the event of any dispute, the decision of the Auctioneer shall be final and binding on all bidders.
3.10. Unsuccessful E-bidders shall have the deposit refunded to the same bank account from which the deposit transfer was made within two (2) working days from the date of auction.
3.11. The information shown and/or prompted on the screen handled by the PAH website in regards to the auction in particular the increment of the bidding price during the bidding process and the declaration of the successful bidder shall be final and conclusive.
Offering Process In connection with the Offering, each of the Co-Managers will:
a. Familiarize itself to the extent it deems appropriate with the business, operations, financial condition and prospects of the Client, including the artwork to be beneficially owned by the Client and information relating to the acquisition of the artwork by Client and its affiliates;
b. Review to its satisfaction the final offering circular filed with the United States Securities and Exchange Commission (“SEC”) pursuant to Rule 253(g) (the “Offering Circular”) and such other documents to be used by such Co-Manager (the “Offering Materials”) in connection with the offering of the Securities; and
c. Review to its satisfaction the active and planned operational practices and procedures of the Client in the conduct of the Offering and assist the Client to meet certain applicable rules and regulations promulgated by, and guidance issued by, the SEC and Financial Industry Regulatory Authority, Inc. (“FINRA”). If each of the Co-Managers is satisfied with the results of its due diligence of Client, each Co-Manager Adviser will then be authorized to:
a. Identify and contact possible high net-worth, ultra-high net-worth, and institutional investors, which might have an interest in receiving the Offering Materials and evaluating participation in the Offering;
b. Engage in conversations with potential investors that express an interest in learning more about the Offering (and similar transactions) via the Masterworks Platform and were directed to the Co-Manager by the Masterworks Platform, which is controlled by an affiliate of the Client;
c. Use the Offering Circular (and any other Offering Materials approved by the Client and such Co-Manager) for solicitation purposes, which the Client will distribute via the Masterworks Platform to each potential investor concurrently with or in advance of any oral communication by a registered representative with such potential investor;
d. Attend meetings with Client and potential investors, and assist the Client in responding to due diligence requests from potential investors;
e. Ensure to its satisfaction that Anti-Money Laundering (“AML”) procedures are implemented for all potential investors in the Offering;
f. Ensure to its satisfaction that suitability assessments are conducted for all potential investors with which such Co-Manager has any communications; and
g. Generally assist the Client in its sale of securities to those potential investors accepted by Client in the Offering.
Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.
Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information.
6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at xxxx://xxx.xxxxx.xxx/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms.
6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile.
6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services.
6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing xxxx to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will xxxx the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer.
6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request.
6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement.
6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.
Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.
9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers.
9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA.
9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.
Parent Right to Access and Challenge Student Data The LEA shall establish reasonable procedures pursuant to which a parent, as that term is defined in 105 ILCS 10/2(g), may inspect and/or copy Student Data and/or challenge the accuracy, relevance or propriety of Student Data, pursuant to Sections 5 and 7 of ISSRA (105 ILCS 10/5; 105 ILCS 10/7) and Section 33 of SOPPA (105 ILCS 85/33). The Provider shall respond to any request by the LEA for Student Data in the possession of the Provider when Provider cooperation is required to afford a parent an opportunity to inspect and/or copy the Student Data, no later than 5 business days from the date of the request. In the event that a parent contacts the Provider directly to inspect and/or copy Student Data, the Provider shall refer the parent to the LEA, which shall follow the necessary and proper procedures regarding the requested Student Data.
Contractor Intellectual Property Contractor shall retain all right, title and interest in and to any work, ideas, inventions, discoveries, tools, methodology, computer programs, processes and improvements and any other intellectual property, tangible or intangible, that has been created by Contractor prior to entering into this Contract (“Contractor Intellectual Property”). Should the State require a license for the use of Contractor Intellectual Property in connection with the development or use of the items that Contractor is required to deliver to the State under this Contract, including Work Product (“Deliverables”), the Contractor shall grant the State a royalty-free license for such development and use. For the avoidance of doubt, Work Product shall not be deemed to include Contractor Intellectual Property, provided the State shall be granted an irrevocable, perpetual, non-exclusive royalty-free license to use any such Contractor Intellectual Property that is incorporated into Work Product.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
