Limitations on License (a) This license is not assignable or transferable by operation of law or otherwise, except upon the express written consent of the parties, but no assignment shall relieve the parties of their respective obligations as to performances rendered, acts done and obligations incurred prior to the effective date of the assignment.
(b) This license authorizes performances by means of “Mechanical Music” only; this license does not authorize live performances.
(c) This license is strictly limited to the theater or production venue where each Community Theatre Production is presented, and does not authorize any performances other than those made at the theatre or production venue premises.
(d) This license does not authorize the broadcasting, telecasting or transmission by wire, Internet, webcasting, or on-line service, or otherwise of renditions of musical compositions in the ASCAP repertory to persons outside of the theatre premises where each Community Theatre Production shall be presented.
(e) This license is limited to non-dramatic performances, and does not authorize any dramatic performances. For purposes of this Agreement, a dramatic performance shall include, but not be limited to, the following:
(i) performance of a “dramatico-musical work” in its entirety;
(ii) performance of one or more musical compositions from a “dramatico-musical work” accompanied by dialogue, pantomime, dance, stage action, or visual representation of the work from which the music is taken;
(iii) performance of one or more musical compositions as part of a story or plot, whether accompanied or unaccompanied by dialogue, pantomime, dance, stage action or visual representation;
(iv) performance of a concert version of a “dramatico-musical work”; The term “dramatico-musical work” includes, but is not limited to, a musical comedy, opera, play with music, revue or ballet.
(f) ASCAP reserves the right at any time to withdraw from its repertory and from operation of this license, any musical work as to which any suit has been brought or threatened on a claim that such composition infringes a composition not contained in ASCAP’s repertory, or on a claim that ASCAP does not have the right to license the performing rights in such composition.
(g) This license does not authorize any performance by means of a coin-operated phonorecord player (jukebox) for which a license is otherwise available from the Jukebox License Office.
(h) This license is limited to the United States, its territories and possessions, and Puerto Rico.
Limitations on Rights of Others The provisions of this Agreement are solely for the benefit of the Owner Trustee, the Depositor, the Certificateholder, the Servicer and, to the extent expressly provided herein, the Trustee, the Trust Collateral Agent and the Noteholders, and nothing in this Agreement, whether express or implied, shall be construed to give to any other Person any legal or equitable right, remedy or claim in the Owner Trust Estate or under or in respect of this Agreement or any covenants, conditions or provisions contained herein.
Limitations on Warranties 14.1 Notwithstanding anything else in this Agreement, neither Party shall be liable for any indirect, special, incidental, punitive or consequential damages, including but not limited to loss of data, business interruption, or loss of profits, that arises from the use of the Licensed Materials, or the incompetence of the Authorized Users to properly use the Licensed Materials.
14.2 The Distributor makes no representation or warranty, and expressly disclaims any liability with respect to the content of any of the Licensed Materials, including but not limited to errors or omissions contained therein, libel, infringement of rights of publicity, privacy, trademark rights, moral rights, or the disclosure of confidential information.
14.3 Except for the express warranties stated elsewhere in this Agreement, the Distributor disclaims any and all other warranties, conditions, or representations (express, implied, oral or written), relating to the Licensed Materials or any part thereof, including, without limitation, any and all implied warranties of quality, performance, merchantability, or fitness for a particular purpose.
Limitations on Disclosure The Company shall not, and the Company shall cause each of its Subsidiaries and each of its and their respective officers, directors, employees and agents not to, provide any Buyer with any material, non-public information regarding the Company or any of its Subsidiaries from and after the date hereof without the express prior written consent of such Buyer (which may be granted or withheld in such Buyer’s sole discretion). In the event of a breach of any of the foregoing covenants, including, without limitation, Section 4(o) of this Agreement, or any of the covenants or agreements contained in any other Transaction Document, by the Company, any of its Subsidiaries, or any of its or their respective officers, directors, employees and agents (as determined in the reasonable good faith judgment of such Buyer), in addition to any other remedy provided herein or in the Transaction Documents, such Buyer shall have the right to make a public disclosure, in the form of a press release, public advertisement or otherwise, of such breach or such material, non-public information, as applicable, without the prior approval by the Company, any of its Subsidiaries, or any of its or their respective officers, directors, employees or agents. No Buyer shall have any liability to the Company, any of its Subsidiaries, or any of its or their respective officers, directors, employees, affiliates, stockholders or agents, for any such disclosure. To the extent that the Company delivers any material, non-public information to a Buyer without such Buyer’s consent, the Company hereby covenants and agrees that such Buyer shall not have any duty of confidentiality with respect to, or a duty not to trade on the basis of, such material, non-public information. Subject to the foregoing, neither the Company, its Subsidiaries nor any Buyer shall issue any press releases or any other public statements with respect to the transactions contemplated hereby; provided, however, the Company shall be entitled, without the prior approval of any Buyer, to make the Press Release and any press release or other public disclosure with respect to such transactions (i) in substantial conformity with the 8-K Filing and contemporaneously therewith and (ii) as is required by applicable law and regulations (provided that in the case of clause (i) each Buyer shall be consulted by the Company in connection with any such press release or other public disclosure prior to its release). Without the prior written consent of the applicable Buyer (which may be granted or withheld in such Buyer’s sole discretion), the Company shall not (and shall cause each of its Subsidiaries and affiliates to not) disclose the name of such Buyer in any filing, announcement, release or otherwise. Notwithstanding anything contained in this Agreement to the contrary and without implication that the contrary would otherwise be true, the Company expressly acknowledges and agrees that no Buyer shall have (unless expressly agreed to by a particular Buyer after the date hereof in a written definitive and binding agreement executed by the Company and such particular Buyer (it being understood and agreed that no Buyer may bind any other Buyer with respect thereto)), any duty of confidentiality with respect to, or a duty not to trade on the basis of, any material, non-public information regarding the Company or any of its Subsidiaries.
Limitations on Use No part of the moneys delivered to the Recipient pursuant to Section II hereof is being or will be used to refinance, retire, redeem, or otherwise pay debt service on all or any part of any part of any governmental obligations regardless of whether the interest on such obligations is or was excluded from gross income for federal income tax purposes unless prior approval by the Director is given.
Limitations on Rights of Third Parties The provisions of this Agreement are solely for the benefit of the Seller, the Issuer, the Indenture Trustee (for the benefit of the Secured Parties) and the other Persons expressly referred to herein, and such Persons shall have the right to enforce the relevant provisions of this Agreement. Nothing in this Agreement, whether express or implied, shall be construed to give to any other Person any legal or equitable right, remedy or claim in the Recovery Property or under or in respect of this Agreement or any covenants, conditions or provisions contained herein.
Limitations on Subsequent Registration Rights From and after the date of this Agreement, the Company shall not, without the prior written consent of Holders holding a majority of the Registrable Securities enter into any agreement with any holder or prospective holder of any securities of the Company giving such holder or prospective holder any registration rights the terms of which are pari passu with or senior to the registration rights granted to the Holders hereunder.
Limitations on Re-Disclosure The Provider shall not re-disclose Student Data to any other party or affiliate without the express written permission of the LEA or pursuant to court order, unless such disclosure is otherwise permitted under SOPPA, ISSRA, FERPA, and MHDDCA. Provider will not sell or rent Student Data. In the event another party, including law enforcement or a government entity, contacts the Provider with a request or subpoena for Student Data in the possession of the Provider, the Provider shall redirect the other party to seek the data directly from the LEA. In the event the Provider is compelled to produce Student Data to another party in compliance with a court order, Provider shall notify the LEA at least five (5) school days in advance of the court ordered disclosure and, upon request, provide the LEA with a copy of the court order requiring such disclosure.
Restrictions on Use This XXXX grants You the right to install and use the Licensed Materials in accordance with the terms under which You have licensed the Licensed Materials from Altium. Notwithstanding the foregoing, Altium permits You to make a Temporary Use of the Licensed Materials so long as such use does not result in the use of more copies of the Licensed Materials than You are permitted to use at any given time, if Your license is so restricted hereunder. In the event that You desire to expand or extend Your use, or to migrate to different Products or functionality within any such Products You must notify Altium prior to any such expanded or extended use and arrange for the licensing of the applicable Licensed Materials.
2.4.1. In no event shall You: a) allow any of Your affiliates, subsidiaries or divisions, any portion of Your business located at a different geographic site, or third parties, to copy, have access to or use any portion whatsoever of the Licensed Materials unless You have licensed the Licensed Materials on a Continental License or Global License basis that would permit such use; notwithstanding the foregoing, You may make a Temporary Use of the Licensed Materials as stated in Section 2.3 above; b) allow any third party to have access to or use any portion whatsoever of the Licensed Materials, unless such access or use is in connection with a Temporary Use by You in carrying out a legitimate business purpose that does not otherwise violate the terms of this XXXX, including but not limited to the restrictions on number of users, if such restrictions apply to Your license hereunder; c) make copies of the Licensed Materials for use by any of Your other affiliates, subsidiaries or divisions, or by any third party; d) allow more than the number of permitted persons to access and use the Licensed Materials at any one time, (whether involving a single license or a license that allows multiple users), including any Temporary Uses, unless you have negotiated with Altium for a license that permits an unlimited number of users to access and use the Licensed Materials; e) allow persons not covered by the geographic scope of Your licenses to use the Licensed Material on a “floating” or other basis; or f) using the Licensed Materials in any way that is not in compliance with Permitted Uses.
2.4.2. In the event that You have licensed the Licensed Materials for use in connection with a single computer, You may install and use only a single copy thereof at any given time, and said copy may be used only by You; provided, however, that if You have licensed the Licensed Materials for use on a single computer: a) you may install a second copy of the Licensed Materials on a home computer solely for use in connection with, and governed by, the License granted herein, so long as such copy is never used simultaneously with the original copy; and b) You may make a back-up, archival copy thereof that You shall install and use only in the event the original copy of the Licensed Materials is lost, corrupted or in some other way made unavailable other than through use or possession by another person.
2.4.3. In the event that You have licensed the Licensed Materials on a Single Site License, Continental License or Global License basis, this XXXX allows as many persons employed or hired as contractors (so long as such contractors have entered into an appropriate form of confidentiality agreement) by You to simultaneously use the Licensed Materials as are permitted under the license obtained from Altium. At no time shall You permit the number of persons that may access and/or use the Licensed Materials to exceed the number of persons for whom You have licensed the same, including in connection with any Temporary Use. You understand and agree that such use beyond that licensed hereunder, whether by allowing excess persons to use the Licensed Materials or otherwise, shall constitute not only breach of this XXXX, but violation of national and international copyright and patent laws. ENGAGING IN ANY USE OF THE LICENSED MATERIALS BY PERSONS BEYOND THE NUMBER PERMITTED TO USE THE SAME, AT SITES FOR WHICH THE LICENSED MATERIALS ARE NOT LICENSED (EXCEPT FOR PERMITTED TEMPORARY USES) OR BY PERSONS NOT AUTHORIZED UNDER YOUR LICENSE TO USE THEM SHALL RESULT IN IMMEDIATE TERMINATION OF THIS XXXX, WHETHER OR NOT ALTIUM IS AWARE OF YOUR ACTIVITIES AT THE TIME OR DISCOVERS THEM LATER. ANY FURTHER USE OF THE LICENSED MATERIALS BY YOU SUBSEQUENT TO SUCH TERMINATION WILL EXPOSE YOU TO LIABILITY FOR COPYRIGHT INFRINGEMENT AND OTHER CLAIMS.
2.4.4. You may increase the number of persons or sites permitted to use the Licensed Materials at any one time, or the features and functionality of Your Licensed Materials through Extensions or otherwise, by paying Altium additional license fees in accordance with then-applicable pricing, provided that such additional persons in no way access or use the Licensed Materials, or the additional functionality, prior to any such additional license fees being paid by You. In the event that any provision of this XXXX is breached by You, the license granted herein shall automatically terminate, without further action by Altium and whether or not You abide by such termination. Failure of Altium to learn about any such breach shall not constitute a basis for You to assert that You are not in breach hereof, or that Altium has acquiesced in such breach.
Limitations on Liens (a) The Company will not, and will not permit any Restricted Subsidiary to, create, assume, incur or guarantee any Indebtedness secured by a mortgage, security interest, pledge, lien, charge or other encumbrance upon any of its or its Restricted Subsidiaries’ properties or assets (a “Lien”), whether owned on the date of issuance of the Notes or thereafter acquired, unless the Notes are at least equally and ratably secured with such secured Indebtedness (together with, if the Company so determines, any other Indebtedness of or guaranty by the Company or such Restricted Subsidiary then existing or thereafter created that is not subordinated to the Notes) for so long as such other Indebtedness is so secured (and any Lien created for the benefit of the holders of the Notes and any other debt securities of any series issued pursuant to the Indenture and having the benefit of this Section 2.8 shall provide by its terms that such Lien will be automatically released and discharged upon the release and discharge of the Lien securing such other Indebtedness); provided, however, that the above restrictions shall not apply to the following (the “Permitted Liens”):
(i) Liens on property or other assets of any Person existing at the time such Person becomes a Restricted Subsidiary, provided that such Lien was not incurred in anticipation of such Person becoming a Restricted Subsidiary;
(ii) Liens on property or other assets existing at the time of acquisition by the Company or any Restricted Subsidiary, provided that such Lien was not incurred in anticipation of such acquisition;
(iii) Liens on property or assets to secure any Indebtedness incurred prior to, at the time of, or within 270 days after, the acquisition of such property or in the case of real property, the completion of construction, the completion of improvements or the beginning of substantial commercial operation of such real property for the purpose of financing all or any part of the purchase price of such real property, the construction thereof or the making of improvements thereto;
(iv) Liens in the Company’s favor or in favor of a Restricted Subsidiary;
(v) Liens existing on the date of issuance of the Notes;
(vi) Liens on property or other assets of a Person existing at the time the Person is merged into or consolidated with the Company or any Restricted Subsidiary or at the time of a sale, lease or other disposition of the properties of a Person as an entirety or substantially as an entirety to either the Company or any Restricted Subsidiary, provided that such Lien was not incurred in anticipation of the merger or consolidation or sale, lease or other disposition;
(vii) Liens arising in connection with the financing of accounts receivable by the Company or any Restricted Subsidiary; provided that the uncollected amount of account receivables subject at any time to any such financing shall not exceed $150,000,000; and
(viii) extensions, renewals or replacements (or successive extensions, renewals or replacements) in whole or in part of any Lien referred to in this Section 2.8 without increase of the principal of the Indebtedness (plus any premium or fee payable in connection with any such extension, renewal or replacement) secured by the Lien; provided, however, that any Permitted Liens shall not extend to or cover any property of the Company or that of any Restricted Subsidiary, as the case may be, other than the property specified in this Section 2.8 and improvements to this property.
(b) Notwithstanding the foregoing, the Company and any Restricted Subsidiary may create, assume, incur or guarantee Indebtedness secured by a Lien without equally and ratably securing the Notes; provided, that at the time of such creation, assumption, incurrence or guarantee, after giving effect thereto and to the retirement of any Indebtedness that is concurrently being retired, the sum of (i) the aggregate amount of all outstanding Indebtedness secured by Liens other than Permitted Liens, and (ii) the Attributable Debt of all the Company’s Sale/Leaseback Transactions permitted by Section 2.9(c) does not at such time exceed 5% of Consolidated Total Assets.
