Location of Manufacturing Activities Sample Clauses

Location of Manufacturing Activities. Notwithstanding anything to the contrary contained herein, all manufacturing activities shall occur at the relevant Manufacturing Facility and Vendor may not change to a different facility (for all or any portion of the manufacture of Product hereunder) unless consented to by Keryx in writing (in its sole discretion); provided, that in all cases no change of Manufacturing Facility shall relieve Vendor of any of its obligations under this Agreement. Vendor shall provide to Keryx supporting data in order to permit Keryx to amend its (and its Affiliates’ and designees’, as applicable) regulatory filings to reflect any such change and shall otherwise cooperate in good faith with Keryx to comply with all regulatory obligations arising out of such changes (and Vendor shall reimburse Keryx for all costs incurred in connection therewith).
Sample 1
AutoNDA by SimpleDocs
Location of Manufacturing Activities. Notwithstanding anything to the contrary contained herein, all Manufacturing activities shall occur at the Facility and PROVIDER may not change to a different facility (for all or any portion of the Manufacture of Product hereunder) unless consented to by CLIENT in writing (in its sole discretion); provided, that in all cases no change of Facility shall relieve PROVIDER of any of its obligations under this Agreement; provided, further, that all changes shall also be in accordance with Section 2.5, to the extent applicable. PROVIDER shall provide to CLIENT supporting data in order to permit CLIENT to amend its (and its Affiliate’s and designee’s, as applicable) regulatory filings to reflect any such change and shall otherwise cooperate in good faith with CLIENT to comply with all regulatory obligations arising out of such changes. Any applicable charges associated with said Facility change will be described and mutually agreed to in a Task Order.
Sample 1
Location of Manufacturing Activities. Notwithstanding anything to the contrary contained herein, except as set forth in Section 4.a of this Agreement, all Manufacturing activities shall occur at the Facility and BioVectra may not change the location of such Manufacture to a different facility (for all or any portion of the Manufacture of Product hereunder) unless consented to by Keryx in writing in Keryx’s sole discretion; provided, that in all cases no change of Facility shall relieve BioVectra of any of its obligations under this Agreement. BioVectra shall provide to Keryx supporting data in order to permit Keryx to amend its (and its Affiliate’s and designee’s, as applicable) regulatory filings to reflect any such change and shall otherwise cooperate in good faith with Keryx to comply with all regulatory obligations arising out of such changes (and BioVectra shall reimburse Keryx for all costs incurred in connection therewith).
Sample 1
Location of Manufacturing Activities. Notwithstanding anything to the contrary contained herein, all manufacturing activities shall occur at the relevant Manufacturing Facility and Vendor may not change to a different facility (for all or any portion of the manufacture of Product hereunder) unless consented to by Keryx in writing (in its sole discretion); provided, that in all cases no change of Manufacturing Facility shall relieve Vendor of any of its obligations under this Agreement. Vendor shall provide to Keryx supporting Portions of the exhibit, indicated by the xxxx “[***],” were omitted and have been filed separately with the Securities and Exchange Commission pursuant to the Registrant’s application requesting confidential treatment pursuant to Rule 24b-2 of the Securities Exchange Act of 1934, as amended. data in order to permit Keryx to amend its (and its Affiliates’ and designees’, as applicable) regulatory filings to reflect any such change and shall otherwise cooperate in good faith with Keryx to comply with all regulatory obligations arising out of such changes (and Vendor shall reimburse Keryx for all costs incurred in connection therewith).
Sample 1
Location of Manufacturing Activities. Notwithstanding anything to the contrary contained herein, all manufacturing activities shall occur at the API Facility and BioVectra may not change to a different facility (for all or any portion of the manufacture of Product hereunder) unless consented to by Keryx in writing (in its sole discretion); provided, that in all cases no change of API Facility and LSU shall relieve BioVectra of any of its obligations under this Agreement. BioVectra shall provide to Keryx supporting data in order to permit Keryx to amend its (and its Affiliate’s and designee’s, as applicable) regulatory filings to reflect any such change and shall otherwise cooperate in good faith with Keryx to comply with all regulatory obligations arising out of such changes (and BioVectra shall reimburse Keryx for all costs incurred in connection therewith).
Sample 1

Related to Location of Manufacturing Activities

  • Marketing Activities The Borrower will not, and will not permit any of its Subsidiaries to, engage in marketing activities for any Hydrocarbons or enter into any contracts related thereto other than (i) contracts for the sale of Hydrocarbons scheduled or reasonably estimated to be produced from their proved Oil and Gas Properties during the period of such contract, (ii) contracts for the sale of Hydrocarbons scheduled or reasonably estimated to be produced from proved Oil and Gas Properties of third parties during the period of such contract associated with the Oil and Gas Properties of the Borrower and its Subsidiaries that the Borrower or one of its Subsidiaries has the right to market pursuant to joint operating agreements, unitization agreements or other similar contracts that are usual and customary in the oil and gas business and (iii) other contracts for the purchase and/or sale of Hydrocarbons of third parties (A) which have generally offsetting provisions (i.e. corresponding pricing mechanics, delivery dates and points and volumes) such that no “position” is taken and (B) for which appropriate credit support has been taken to alleviate the material credit risks of the counterparty thereto.

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. (b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.

  • Extracurricular Activities Effective July 1, 2009, stipends for participation in extracurricular activities which are authorized by the appointing authority shall be: Inland $950/year Sailing $400/year Art Club Advisor $300/year Drama Club Advisor $300/year Cross Country Skiing $150/year Boys’ Basketball $1000/year Girls’ Basketball (if class D) $1000/year Asst. Boys’ Basketball $750/year Asst. Girls’ Basketball (if class D) $750/year Scorekeeper/Timekeeper $10/game Soccer $400/year Track $400/year Cross County Running $400/year Girls’ Basketball (if not class D) $400/year Sports Activity Director $400/year Athletic Director $200/year

  • Regulatory Activities Beginning on the Effective Date and to the extent UGNX remains the Lead Development Party with respect to a particular territory, subject to and in accordance with the terms and conditions of this Agreement and the requirements of Applicable Laws, UGNX, shall: (a) use Commercially Reasonable Efforts to file (or have filed) all Regulatory Filings with respect to the Licensed Products in the Field in order to obtain Marketing Approvals in each country in the Territory and the European Territory (or to obtain the European Centralized Approval in the European Core Territory) and in order to obtain Pricing and/or Reimbursement Approvals in the Profit Share Territory; (b) respond in a timely fashion to requests for data and information from Regulatory Authorities with respect to the Licensed Products in the Field in the Territory and the European Territory; and (c) meet with officials of the Regulatory Authorities at such times as may be requested by such Regulatory Authorities with respect to the Core Development Activities (“Regulatory Activities”), provided that KHK will have primary responsibility for obtaining, and UGNX shall provide all assistance reasonably requested by KHK, in relation to Pricing and/or Reimbursement Approvals for the Licensed Products in the Field in the European Territory. For the avoidance of doubt, UGNX will be responsible for obtaining, and KHK will provide all assistance reasonably requested by UGNX, in relation to Pricing and/or Reimbursement Approvals, if any, for the Licensed Products in the Field in the Profit Share Territory as part of the UGNX Core Development Activities, it being understood that the costs incurred by UGNX in connection with such activities will be shared equally (50/50). All such Regulatory Activities will be conducted in a manner consistent with the Core Development Plan and coordinated by the JSC in accordance with Article 3. Without limiting the applicability of the foregoing and the remainder of this Article 5, UGNX shall interface with the applicable Regulatory Authority(ies) and, through the JDC, shall keep KHK reasonably informed of all material events and developments occurring in the course of the Regulatory Activities, including scheduled UGNX regulatory strategy discussions and meetings with Regulatory Authorities in the Territory and the European Territory relating to the Licensed Products in the Field.

  • Field The term “

  • EXTRA-CURRICULAR ACTIVITIES 1. In this Agreement, extra-curricular programs and activities include all those that are beyond the provincially prescribed and locally determined curricula of the school district. 2. The Board and the Association consider it desirable that teachers participate in extra-curricular activities, and recognize that participation in extra-curricular activities by the individual teacher is on a voluntary basis.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!