Manhole Safety. When any work is being done in a manhole, there shall be an employee stationed at the street level as a safety measure when working conditions warrant.
Manhole Safety Sample Clauses
Related to Manhole Safety
Fire Safety Resident will not tamper with fire alarms, smoke detectors, fire extinguishers, fire hoses, or exit signs. Resident will promptly evacuate Residence Facility upon the sounding of an alarm or as otherwise directed by College Housing staff. Resident will participate in any periodic fire drill and fire safety training conducted by College for the Residence Facility.
Child Safety BCHS values children from all backgrounds and is committed to making our community a safe, nurturing and welcoming place for children to grow and develop. We are committed to making sure ALL children reach their individual potential.
Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.
Workplace Safety The parties to this Agreement commit themselves to achieving the highest possible standards of occupational health and safety including adherence to the consultative and issue resolution processes included herein. Participation in and support for building and construction industry initiatives to improve construction industry standards in occupational health and safety will form an important part of this commitment. Observance of relevant Acts, Regulations, and Codes of Practice are the minimum level acceptable to enable employers and employees to meet their responsibilities and to work safely and follow health and safety rules in their workplace. On all sites there will be developed a site safety plan and job specific ‘job safety analysis’ to identify and manage the risks associated with work on each particular site. Such safety plan will include suitable procedures for personnel/material access, and site evacuation procedures. The Incolink Safety Handbook ‘SAFE’ (as amended) is endorsed by this Agreement as a proper guide and reference source for safety management and control of risks. 1) The parties agree that the WorkSafe Australia Guidance Notes on Material Safety Data Sheets shall be observed at all times. 2) Hearing tests: Audiometric tests should be conducted within two months of a person commencing employment, and thereafter at intervals of two years.
Accident Prevention Health and Safety Committee (a) The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the workplace in order to prevent accidents, injury and illness. (b) Recognizing its responsibilities under the applicable legislation, the Employer agrees to accept as a member of its Accident Prevention – Health & Safety Committee at least three (3) representatives, one from each base, selected or appointed by the Union from amongst bargaining unit employees. At any time where a vote is required, an equal number of representatives from each side shall be entitled to vote. (c) Such Committee shall identify potential dangers and hazards, institute means of improving health and safety programs and recommend actions to be taken to improve conditions related to safety and health. (d) The Employee agrees to co-operate reasonably in providing necessary information to enable the Committee to fulfill its functions. (e) Meetings shall be held quarterly or more frequently at the call of the Chair if required. The Committee shall maintain minutes of all meetings and make the same available for review. (f) Any representative appointed or select in accordance with (b) hereof shall serve a term of one (1) calendar year from the date of appointment which may be renewed for further periods of one (1) year. The Union will encourage its representative(s) to serve at least one (1) year. Time off for such representative(s) to attend meetings of the Accident Prevention – Health & Safety Committee in accordance with the foregoing shall be granted and time so spent attending such meetings shall be deemed to be work time for which the representative(s) shall be paid by the Employer at his regular or premium rate as may be applicable. (g) The Union agrees to endeavour to obtain the full co-operation of its membership in the observation of all safety rules and practices. (h) Pregnant employees may request to be transferred from their current duties if, in the professional opinion of the employee’s physician, the pregnancy may be at risk. If such a transfer is not feasible, the pregnant employee, if she so requests, will be granted an unpaid leave of absence before commencement of the maternity leave referred to in Article 16.04
Health & Safety (a) The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the Home, in order to prevent injury and illness and abide by the Occupational Health and Safety Act as amended from time to time. (b) A Joint Health and Safety Committee (JHSC) shall be constituted in accordance with the Act, which shall identify potential dangers, recommend means of improving the health and safety programs and obtaining information from the Employer or other persons respecting the identification of hazards and standards. The committee shall meet at least every three months or more frequently if the committee decides. The Employer agrees to accept as a member of its Joint Health and Safety Committee at least one (1) ONA representative selected or appointed by the Union from the Employer. Scheduled time spent in such meetings is to be considered time worked for which representative(s) shall be paid by the Employer at his or her regular or overtime rate. Minutes shall be taken of all meetings and copies shall be sent to the Committee members within two (2) weeks following the meeting, if possible. Minutes of the meetings shall be posted on the workplace health and safety bulletin board. (c) The Employer shall provide the time from work with pay and all related tuition costs and expenses necessary to certify the worker representative. Where an inspector makes an inspection of a workplace under the powers conferred upon him or her under the Occupational Health and Safety Act, the Employer shall afford a committee member representing workers the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Where a committee member is not available, the Employer shall afford a worker selected by a Union, because of knowledge, experience and training, to represent it, the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. (d) Two (2) representatives of the Joint Health and Safety Committee, one (1) from management and one (1) from the employees, shall make monthly inspections of the work place and shall report to the health and safety committee the results of their inspection. The members of the Committee who represent the workers shall designate a member representing workers to inspect the workplace. Where possible that member shall be a certified member. The Employer shall provide the member with such information and assistance as the member may require for the purpose of carrying out an inspection of the workplace. Scheduled time spent in all such activities shall be considered as time worked. (e) The Joint Health and Safety Committee and the representatives thereof shall have access to Incident/Accident Report Form required in S.51, S.52 and S.53 of the Act and the annual summary of data from the WSIB relating to the number of work accident fatalities, the number of lost workday cases, the number of lost workdays, the number of non-fatal cases that required medical aid without lost workdays, the incidence of occupational injuries, and such other data as the WSIB may decide to disclose. It is understood and agreed that no information will be provided to the Committee which is confidential. This information shall be a standing item recorded in the minutes of each meeting. (f) The Union will use its best efforts to obtain the full co-operation of its membership in the compliance of all safety rules and practices. (g) The Employer will use its best efforts to make all affected direct care employees aware of residents who have serious infectious diseases. The nature of the disease need not be disclosed. Employees will be made aware of special procedures required of them to deal with these circumstances. The parties agree that all employees are aware of the requirement to practice universal precautions in all circumstances. (h) The parties further agree that suitable subjects for discussion at the Union-Management Committee and Joint Health and Safety Committee will include aggressive residents. The Employer will review with the Joint Health and Safety Committee written policies to address the management of violent behaviour. Such policies will include but not be limited to: i) Designing safe procedures for employees, ii) Providing training appropriate to these policies, iii) Reporting all incidents of workplace violence. (i) The Employer shall: i) Inform employees of any situation relating to their work which may endanger their health and safety, as soon as it learns of the said situation, ii) Inform employees regarding the risks relating to their work and provide training and supervision so that employees have the skills and knowledge necessary to safely perform the work assigned to them, When faced with occupational health and safety decisions, the Home will not await full scientific or absolute certainty before taking reasonable action(s) that reduces risk and protects employees. iii) Ensure that the applicable measures and procedures prescribed in the Occupational Health and Safety Act are carried out in the workplace. (j) A worker shall, i) Work in compliance with the provisions of the Occupational Health and Safety Act and the regulations, ii) Use or wear the equipment, protective devices or clothing that the worker's Employer requires to be used or worn, iii) Report to his or her Employer or supervisor the absence of or defect in any equipment or protective device of which the worker is aware and which may endanger himself, herself or another worker, and iv) Report to his or her Employer or supervisor any contravention of the Occupational Health and Safety Act or the regulations or the existence of any hazard of which he or she knows.
Cleanliness and Safety; Entry Resident agrees to maintain the assigned bedroom space, the apartment and the common areas of the Property in a clean, safe and sanitary condition, to exercise all due care in the use of same, and to cooperate fully with the Property pest control program as requested. Resident will be responsible for the cost of treatment for bedbugs and similar pests to the extent Owner’s pest control vendor reasonably determines that an infestation has originated within Resident’s assigned space and during Resident’s occupancy. Resident will place all trash in provided receptacles and will be responsible for the cost of cleaning the interior or exterior of the apartment if not kept in sanitary condition. When outdoor temperatures are below 40 degrees Fahrenheit, Resident will keep the apartment’s heat turned on to prevent frozen or burst pipes, including during vacations. When outdoor temperatures exceed 85 degrees Fahrenheit, Resident will keep the apartment’s air conditioning turned on and set to a reasonable temperature to prevent mold or mildew growth, including during vacations. Owner and its agents, employees and contractors may enter any apartment and bedroom space to perform routine maintenance, inspections, showings and other ordinary functions, provided that Owner will provide advance notice to residents of an apartment before such entry. Owner reserves the right to enter an apartment and any bedroom space without prior notice (including a passkey and/or disarming the alarm or other means of entry if locks have been changed) for emergency maintenance or repair purposes, or when there is reasonable cause to believe that a situation exists that could cause danger to life, safety, health or property. Owner may confiscate any item deemed to cause a danger and is under no obligation to pay compensation for or to return such items.
Rectification of Safety Hazard Where, because of the existence of a safety hazard, a site has been stopped for a defined period of time and Employees sent off site by agreement between Site Managers and any combination of Union Official/s, Health and Safety Committee, those people who remain on site to do rectification work will be paid at the rate of double time for all such work.
OCCUPATIONAL HEALTH & SAFETY (a) It is a mutual interest of the parties to promote health and safety in workplaces and to prevent and reduce the occurrence of workplace injuries and occupational diseases. The parties agree that health and safety is of the utmost importance and agree to promote health and safety and wellness throughout the organization. The employer shall provide orientation and training in health and safety to new and current employees on an ongoing basis, and employees shall attend required health and safety training sessions. Accordingly, the parties fully endorse the responsibilities of employer and employee under the Occupational Health and Safety Act, making particular reference to the following:
Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.
