Manufacturing Committee Responsibilities Sample Clauses

Manufacturing Committee Responsibilities. The Manufacturing Committee shall provide a forum for the discussion and review of matters related to the Manufacturing and supply of Collaboration Products, including the following: (a) worldwide Manufacturing and sourcing strategies in support of the Development and Commercialization of Collaboration Products, including the strategic aspects of Manufacture and release of finished Collaboration Product; CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT UNDER RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934. MASTER AGREEMENT (b) use of Third Parties to Manufacture and supply any Collaboration Product; (c) logistical strategies, capacity planning and inventory levels for each Collaboration Product for consistency with the then-current Development Plans and Commercialization Plans for such Collaboration Product; (d) results of regulatory inspections related to Collaboration Products and reviewing steps to be taken by the Parties to address any deficiencies noted; (e) capacity planning and supply continuity plans for each Collaboration Product for consistency with the then-current Development Plan and Commercialization Plan for such Collaboration Product; regulatory compliance related to the Manufacture of Collaboration Products; (f) material quality-related issues concerning the Collaboration Products; (g) costs of Manufacture; (h) providing updates to the AJSC or a PJSC, as applicable, upon request relating to Manufacturing issues; and (i) such other matters as the Parties agree in writing shall be the responsibility of the Manufacturing Committee.
AutoNDA by SimpleDocs

Related to Manufacturing Committee Responsibilities

  • Committee Responsibilities Subject to the provisions of the Plan, the Committee shall have full authority and discretion to take the following actions: (i) To interpret the Plan and to apply its provisions; (ii) To adopt, amend or rescind rules, procedures and forms relating to the Plan; (iii) To adopt, amend or terminate sub-plans established for the purpose of satisfying applicable foreign laws including qualifying for preferred tax treatment under applicable foreign tax laws; (iv) To authorize any person to execute, on behalf of the Company, any instrument required to carry out the purposes of the Plan; (v) To determine when Awards are to be granted under the Plan; (vi) To select the Participants to whom Awards are to be granted; (vii) To determine the type of Award and number of Shares or amount of cash to be made subject to each Award; (viii) To prescribe the terms and conditions of each Award, including (without limitation) the Exercise Price and Purchase Price, and the vesting or duration of the Award (including accelerating the vesting of Awards, either at the time of the Award or thereafter, without the consent of the Participant), to determine whether an Option is to be classified as an ISO or as a Nonstatutory Option, and to specify the provisions of the agreement relating to such Award; (ix) To amend any outstanding Award Agreement, subject to applicable legal restrictions and to the consent of the Participant if the Participant’s rights or obligations would be materially impaired; (x) To prescribe the consideration for the grant of each Award or other right under the Plan and to determine the sufficiency of such consideration; (xi) To determine the disposition of each Award or other right under the Plan in the event of a Participant’s divorce or dissolution of marriage; (xii) To determine whether Awards under the Plan will be granted in replacement of other grants under an incentive or other compensation plan of an acquired business; (xiii) To correct any defect, supply any omission, or reconcile any inconsistency in the Plan or any Award Agreement; (xiv) To establish or verify the extent of satisfaction of any performance goals or other conditions applicable to the grant, issuance, exercisability, vesting and/or ability to retain any Award; and (xv) To take any other actions deemed necessary or advisable for the administration of the Plan. Subject to the requirements of applicable law, the Committee may designate persons other than members of the Committee to carry out its responsibilities and may prescribe such conditions and limitations as it may deem appropriate, except that the Committee may not delegate its authority with regard to the selection for participation of or the granting of Awards under the Plan to persons subject to Section 16 of the Exchange Act. All decisions, interpretations and other actions of the Committee shall be final and binding on all Participants and all persons deriving their rights from a Participant. No member of the Committee shall be liable for any action that he has taken or has failed to take in good faith with respect to the Plan or any Award under the Plan.

  • Licensee Responsibilities Licensee is responsible for Licensee’s Users’ compliance with this Agreement. Licensee is responsible for all of Licensee’s uses and accounts. Licensee will be responsible for maintaining the security of Licensee’s accounts, passwords and files. Licensee and Users cannot share Licensee’s accounts or passwords or allow any third party to use Licensee’s accounts or passwords. Licensee will exercise reasonable precautions to prevent unauthorized use of the Software.

  • Development Responsibilities From and after the Effective Date, BMS shall assume sole responsibility for the Development of Compounds and Products in the Field in the Territory during the Term at its own cost and expense (including responsibility for all funding, resourcing and decision-making, subject to Sections 3.3 and 3.4), except with respect to the performance by Ambrx of the Research Program activities assigned to Ambrx pursuant to the Research Plan and as otherwise may be agreed upon by the Parties in writing. BMS, by itself or through its Affiliates and Sublicensees, shall use Diligent Efforts to Develop a Compound or Product in the Field in accordance with the Development Plan for the purpose of obtaining a Regulatory Approval in each Major Market. For clarity, it is understood and acknowledged that Diligent Efforts in the Development of Compounds and Products may include sequential implementation of Clinical Trials and/or intervals between Clinical Trials for data interpretation and clinical program planning and approval.

  • Joint Responsibilities The relationship between SAE ITC, the Activities and its Members shall be, and at all times, advisory only, and no party shall have the authority to enter into any contract or commitment in the name of, or on behalf of, any other party. Nothing in this Agreement shall be construed to confer upon either party the status of employee, agent, partner, joint venturer or legal representative of the other, it being intended by all parties to remain independent legal entities solely responsible for its own actions.

  • Client Responsibilities You are responsible for (a) assessing each participants’ suitability for the Training, (b) enrollment in the appropriate course(s) and (c) your participants’ attendance at scheduled courses.

  • GRANTEE RESPONSIBILITIES To participate as a provider under this Contract, the Grantee must: 2.1 Ensure compliance with this Contract, including these Grantee requirements; 2.2 Ensure compliance with all applicable federal and state laws, rules, regulations, standards, guidelines, and policies in effect on the beginning date of this Contract unless amended, including, but not limited to, Texas Health and Safety Code Chapter 31; 2.3 Ensure compliance with all state and federal statutes and regulations, HHSC rules, policies, procedures, and guidelines governing the Program, included but not limited to, TAC Title 25, Part 1 Chapter 39, and - Subchapter A, §39.1 -§39.11. The foregoing rules in TAC Title 25 - as they relate to the Program may be further modified and revised- within their existing title- during the term of the Contract. In the event of such modifications or revision, Grantee shall be required to comply with said rules; 2.4 Ensure compliance at all times with the current Program Policy Manual that is available online and incorporated into this Contract as

  • Specific Responsibilities Without limiting the responsibilities of the Manager, the Manager will: 1. Maintain office facilities (which may be in the offices of the Manager or a corporate affiliate but shall be in such location as the Trust reasonably determines). 2. Furnish statistical and research data, clerical services and stationery and office supplies. 3. Compile data for, prepare for execution by the Fund and file all the Fund’s federal and state tax returns and required tax filings other than those required by this Agreement to be made by the Fund’s custodian and transfer agent. 4. Prepare compliance filings pursuant to state securities laws with the advice of the Trust’s counsel. 5. Prepare the Trust’s Annual and Semi-Annual Reports to Shareholders and amendments to its Registration Statements (on Form N-1A or any replacement therefor). 6. Compile data for, prepare and file timely Notices to the SEC required pursuant to Rule 24f-2 under the 1940 Act. 7. Determine the daily pricing of the portfolio securities and computation of the net asset value and the net income of Fund in accordance with the Prospectus, resolutions of the Trust’s Board of Trustees, and the procedures set forth in EXHIBIT A: NET ASSET VALUE CALCULATIONS. 8. Keep and maintain the financial accounts and records of the Fund and provide the Trust with certain reports, as needed or requested by the Fund. 9. Provide officers for the Trust as requested by the Trust’s Board of Trustees. 10. Perform fund accounting services for the Fund as set forth in EXHIBIT B: FUND ACCOUNTING FUNCTIONS. 11. Generally assist in all aspects of the operations of the Fund.

  • Client’s Responsibilities (a) Client agrees to advise Consultant regarding Client's Project requirements and to provide all relevant information, surveys, data and previous reports accessible to Client which Consultant may reasonably require. (b) Client shall designate a Project Representative to whom all communications from Consultant shall be directed and who shall have limited administrative authority on behalf of Client to receive and transmit information and make decisions with respect to the Project. Said representative shall not, however, have authority to bind Client as to matters of governmental policy or fiscal policy, nor to contract for additions or obligations exceeding a value which is the lesser of $5000 or 5% of the maximum contract price. (c) Client shall examine all documents presented by Consultant, and render decisions pertaining thereto within a reasonable time. The Client's approval of any drawings, specifications, reports, documents or other materials or product furnished hereunder shall not in any way relieve Consultant of responsibility for the professional adequacy of its work. (d) Client shall perform its obligations and render decisions within a reasonable time under the circumstances presented. Based upon the nature of Client and its requirements, a period of 14 days shall be presumed reasonable for any decision not involving policy decision or significant financial impact, when all information reasonably necessary for Client to responsibly render a decision has been furnished. A period of 46 days shall be presumed reasonable for Client to act with respect to any matter involving policy or significant financial impact. The above periods of presumed reasonableness shall be extended where information reasonably required is not within the custody or control of Client but must be procured from others.

  • Scope of Responsibilities The Management Committee shall have the following responsibilities: (a) Supervision and review of the work of the other ISO Committees; (b) Review and determination of appeals from actions of the other Committees, and the ability to suspend an action by another Committee pending appeal if the Management Committee determines that such suspension is warranted; (c) Development of procedures for the consideration and determination of requests for the stay of an action by another Committee; (d) Development of positions on ISO operations, policies, rules and procedures and provision of recommendations to the other Committees and the Board; (e) Preparation of the ISO capital and operating budgets for review and approval by the ISO Board; and (f) Subject to Article 19, proposing changes to the ISO OATT, the ISO Services Tariff and this Agreement, reviewing and making recommendations with respect to tariff changes proposed by the ISO Board; (g) Adoption of by-laws for the Management Committee and the review and approval of the by-laws of the other ISO Committees and amendments thereto; (h) Development of procedures and policies for all ISO Committees for the handling of confidential information; and (i) Such other responsibilities and powers conferred on it by the ISO Board. Decisions by the Management Committee may be appealed to the ISO Board by any Party.

  • Employer Responsibilities Recognizing the inherent risk(s) in a correctional setting, the Employer is obligated to provide a safe workplace and to educate employees on proper safety procedures and use of protective and safety equipment. The Employer is committed to responding to legitimate safety concerns raised by the Union and employees. The Employer will comply with federal and state safety standards, including requirements relating to first aid training, first aid equipment and the use of protective devices and equipment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!