Mapping of Alluvial Deposits Sample Clauses

Mapping of Alluvial Deposits. Alluvial deposits were mapped in the field from JLD to Deadmans Bar and at Moose. The mapping was completed on aerial photographs (1:12,000 scale) taken in July 2002 (mean daily discharge in Segment 1 was 70 m3/s). We walked approximately 95% of the contacts while referring to aerial photographs taken in 1945, 1969, and 1990/1991. The mapping was completed in 2005 from mid-July to early October when flows in Segment 1 averaged 47 m3/s and varied less than 16 m3/s. Five characteristics were established for each mapped deposit: 1) elevation above the water surface at the time of mapping, 2) stratigraphy, 3) surface textures, 4) associated facies, and 5) differences in vegetation growing on the deposit (no vegetation surveys were conducted, so these differences were based on observations made while mapping alluvial deposits). We digitized the completed maps into a GIS using the 2002 orthophotographs as a base- map. We assumed a maximum linear error of 3 m, calculated as the half-width of a 0.5 mm pencil line on 1:12,000 scale photographs.
Sample 1
AutoNDA by SimpleDocs

Related to Mapping of Alluvial Deposits

  • How Are Distributions from a Xxxxxxxxx Education Savings Account Taxed For Federal Income Tax Purposes? Amounts distributed are generally excludable from gross income if they do not exceed the beneficiary’s “qualified higher education expenses” for the year or are rolled over to another Xxxxxxxxx Education Savings Account according to the requirements of Section (4). “Qualified higher education expenses” generally include the cost of tuition, fees, books, supplies, and equipment for enrollment at (i) accredited post-secondary educational institutions offering credit toward a bachelor’s degree, an associate’s degree, a graduate-level or professional degree or another recognized post-secondary credential and (ii) certain vocational schools. In addition, room and board may be covered if the beneficiary is at least a “half-time” student. This amount may be reduced or eliminated by certain scholarships, qualified state tuition programs, HOPE, Lifetime Learning tax credits, proceeds of certain savings bonds, and other amounts paid on the beneficiary’s behalf as well as by any other deductions or credits taken for the same expenses. The definition of “qualified education expenses” includes expenses more frequently and directly related to elementary and secondary school education, including the purchase of computer technology or equipment or Internet access and related services. To the extent payments during the year exceed such amounts, they are partially taxable and partially non-taxable similar to payments received from an annuity. Any taxable portion of a distribution is generally subject to a 10% penalty tax in addition to income tax unless the distribution is (i) due to the death or disability of the beneficiary, (ii) made on account of a scholarship received by the beneficiary, or (iii) is made in a year in which the beneficiary elects the HOPE or Lifetime Learning credit and waives the exclusion from income of the Xxxxxxxxx Education Savings Account distribution. You may be allowed to take both the HOPE or Lifetime Learning credits while simultaneously taking distributions from Xxxxxxxxx Education Savings Accounts. However, you cannot claim a credit for the same educational expenses paid for through Xxxxxxxxx Education Savings Account distributions. To the extent a distribution is taxable, capital gains treatment does not apply to amounts distributed from the account. Similarly, the special five- and ten-year averaging rules for lump-sum distributions do not apply to distributions from a Xxxxxxxxx Education Savings Account. The taxable portion of any distribution is taxed as ordinary income. The IRS does not require withholding on distributions from Xxxxxxxxx Education Savings Accounts.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Disclosure Statement for Xxxxxxxxx Education Savings Accounts 1. Who is Eligible for a Xxxxxxxxx Education Savings Account? Anyone may contribute to a Xxxxxxxxx Education Savings Account regardless of his or her relationship to the beneficiary. The beneficiary of a Xxxxxxxxx Education Savings Account

  • Mobile Deposit The Mobile Deposit feature enables you to use a software application together with your Wireless Access Device to create electronic images of the front and back of certain Original Checks (defined below) and transmit those images and other information, including, without limitation, information captured from the magnetic ink character recognition (“MICR”) line, to us for review and processing in accordance with this Agreement.

  • Public Posting of Approved Users’ Research Use Statement The PI agrees that information about themselves and the approved research use will be posted publicly on the dbGaP website. The information includes the PI’s name and Requester, project name, Research Use Statement, and a Non-Technical Summary of the Research Use Statement. In addition, and if applicable, this information may include the Cloud Computing Use Statement and name of the CSP or PCS. Citations of publications resulting from the use of controlled-access datasets obtained through this DAR may also be posted on the dbGaP website.

  • Administrative Civil Liability The Settling Respondent hereby agrees to the imposition of an administrative civil liability totaling $549,600 to resolve the alleged violations set forth in Section II, paragraph 4, as follows:

  • ECR Number Environmental Commitment Record Requirements Description of ADOT Responsibilities TMP-3 The following measures will be implemented for the Selected Alternative: • All equipment exhaust systems will be in good working order. Properly designed engine enclosures and intake silencers will be used. • Equipment will be maintained on a regular basis. New equipment will be subject to new product emission standards. • Stationary equipment will be located as far away from sensitive receivers as possible. • Construction-related noise generators will be shielded from noise receivers (e.g., use temporary enclosures to shield generators or crushers, take advantage of site conditions to provide topographic separation). • Construction alerts will be distributed to keep the public informed of construction activities, and a toll-free number for construction-related complaints will be provided. • During the design phase, hours of operation will be evaluated to minimize disruptions during construction. ADOT to oversee for compliance TMP-4 Congestion from construction-related traffic will create temporary impacts in the project vicinity. The magnitude of these impacts will vary depending on the location of the sources of the fill material and of the disposition sites for surplus material, the land uses along the routes, the duration of hauling operations, staging locations, and the construction phasing. To identify acceptable routes and times of operation, ADOT, or its representative, will prepare an agreement with local agencies regarding hauling of construction materials on public streets. ADOT to oversee for compliance TP Attachment 000-0 Xxxxx Xxxxxxxx Xxxxxxx Project Record of Decision (ROD) Developer’s Environmental Commitment Requirements The following table includes the Project-specific environmental commitments as written in the ROD, with minor modifications for clarification purposes. As it relates to these Technical Provisions, references to freeway, project, South Mountain Freeway, proposed action, proposed freeway, and Selected Alternative mean the Project, and references to contractor mean Developer. Developer shall comply with and perform all of the contractor and ADOT requirements, including the ADOT obligations, commitments, and responsibilities, identified in the following table, except to the extent of those requirements that are specifically identified in the third column, entitled “Description of ADOT Responsibilities,” which are not delegated to Developer.

  • Mobile Deposit Service Pursuant to the terms of this Agreement, you may use the Service to deposit Items to your Account by creating an Image of the Item using a Mobile Device, and transmitting that Image to us for deposit. You may transmit Images to us only from a Mobile Device located in the United States.

  • Disbursement Generally OEM shall reimburse eligible costs incurred in carrying out the Project, up to the Grant Fund amount provided in Section 3. Reimbursements shall be made by OEM upon approval by OEM of an RFR. Eligible costs are the reasonable and necessary costs incurred by Subrecipient for the Project, in accordance with the Emergency Management Performance Grants guidance and application materials, including without limitation the United States Department of Homeland Security Notice of Funding Opportunity Announcement (NOFO), that are not excluded from reimbursement by OEM, either by this Agreement or by exclusion as a result of financial review or audit. The guidance, application materials and NOFO are available at xxxx://xxx.xxxxxx.xxx/OEM/emresources/Grants/Pages/EMPG.aspx

  • Direct Deposits The Credit Union may offer direct deposit options allowing you to preauthorize deposits (i.e., payroll checks, Social Security or retirement checks, or other government checks) or preauthorize transfers from other accounts at the Credit Union. You must authorize any direct deposits to your accounts by a separate authorization form. If applicable, you must notify the Credit Union at least thirty (30) days prior to any direct deposit or preauthorized transfer if you wish to cancel or change the direct deposit or direct transfer option. Upon a filing of a bankruptcy, if you fail to cancel any direct deposit authorization, you instruct your employer and the Credit Union to make and apply direct deposits in accordance with your authorization on file with the Credit Union. If the Credit Union is required to reimburse the U.S. Government for any benefit payment directly deposited into your account for any reason, you agree the Credit Union may deduct the amount returned from any of your accounts, unless prohibited by law.

Time is Money Join Law Insider Premium to draft better contracts faster.