Measuring EPP parameters Every 5 minutes, EPP probes will select one “IP address” of the EPP servers of the TLD being monitored and make an “EPP test”; every time they should alternate between the 3 different types of commands and between the commands inside each category. If an “EPP test” result is undefined/unanswered, the EPP service will be considered as unavailable from that probe until it is time to make a new test.
Measuring DNS parameters Every minute, every DNS probe will make an UDP or TCP “DNS test” to each of the public-‐DNS registered “IP addresses” of the name servers of the domain name being monitored. If a “DNS test” result is undefined/unanswered, the tested IP will be considered unavailable from that probe until it is time to make a new test.
MEASURING EQUIPMENT 1. Seller will maintain and operate, atlts own, expense and atthe point of delivery of gas hereunder, a meter or meters and othernecessary equipment by which the volume of gas delivered hereunder shall be measured. Such meters and equipment shall remain the property of the Seller. 2. Buyer agrees lo furnish to Seller electricity for operating Seller's meters, at not cost to Seller. 3. Buyer hereby grants to Seller suitable rlghts-0f-way and easements necessary or Incidental for the installatioo, maintenance, operation and removal of pipeline and other facilities together with rights ofingress thereto and egress there from at all times and hereby agrees to deliver to Seller, for the sum of one dollar ($1.00), an appropriate instrument or grant defining such rights and easements located on Buyer's planlslte. 4. Buyer may install, maintain and operate such check measuring equipment, Including arecording gravltometer and calorimeter as it shall desire, provided that such equipment shall be so installed so as not to Interfere with the operation of Seller's measuring equipment at or near the point of deliver. However, all xxxxxxxx to the Buyer shall be based on the metering of the Seller, subject only to the provisions of Paragraph 8 of this Article. 5. Each party shall have the right to be present at the time of any installing, reading, cleaning, changing, repairing, Inspecting, testing, calibrating, or adjusting done In connection with the other's measuring equlpme!lt used in measuring deliveries hereunder and each party shall advise the other of any Intended major maintenance operation sufficiently in advance in order that the other party may conveniently have its representative present. 6. All installatioo of measuring equipmenL applying to or effecting deliveries hereunder, shall be rnade in such manner as to perrnit an accurate detenninalion of the quantity of gas delivered and ready verification of the accuracy of measurement Orifice meter Installations, If used, shall oonforrn lo the recommendation for design and lnstallatioo contained in the Gas Measurement Commiltee Report No. 3 to the American Gas Association published April, 1955, and any modificatioos and amendments thereof and shall include the use of flange connections. 7. Measurement on Seller's meter or meters shall be conclusive of both parties except where the meter Is defective or fails to register, or if found in E)rror, in either of which case Seller shall repair or replace the meter and the quantity of gas delivered while the meter was out of order or failed to register shall be estimated: (a) By using the registration of any check meter If installed and accurately registering, or, In the absence of (a): (b) By correcting the error If the percentage of error by calibration, test or mathematical calculation, or, in the absence of both (a) and (b) then: (c) By estimating the quantity of delivery from deliveries during periods under similar oonditions when the meter was registering actUrately; and an appropriate billing adjusbnentshall be made In accordance with the current Rules and Regulations governing gas systems issued by the Commission. 8. Seller will maintain its meters in .good order and to this end Wiii make periodic tests of its meters pursuant to the current Rules and Regulations governing gas systems issued by the Commission, or at such shorter intervals as seem to Seller desirable. lfBuyer Is dissatisfied with the accuracy at eny time, it may call upon Seller to have Iha meter tested in accordance with all regulatioos relating to such tests and results of such tesls as found in the current Rules and Regulations governing gas systems issued by the Commission. 9. Each party shall preserve all records for aperiod of at least two (2) years.
Measurement Should the State terminate this contract as herein provided, no fees other than fees due and payable at the time of termination shall thereafter be paid to the Engineer. In determining the value of the work performed by the Engineer prior to termination, the State shall be the sole judge. Compensation for work at termination will be based on a percentage of the work completed at that time. Should the State terminate this contract under paragraph (4) or (5) above, the Engineer shall not incur costs during the thirty-day notice period in excess of the amount incurred during the preceding thirty days.
Measurement method An isolation resistance test instrument is connected between the live parts and the electrical chassis. The isolation resistance is subsequently measured by applying a DC voltage at least half of the working voltage of the high voltage bus. If the system has several voltage ranges (e.g. because of boost converter) in conductively connected circuit and some of the components cannot withstand the working voltage of the entire circuit, the isolation resistance between those components and the electrical chassis can be measured separately by applying at least half of their own working voltage with those components disconnected.
Measurement Period In this Agreement, unless the contrary intention appears, a reference to:
Benchmarks for Measuring Accessibility For the purposes of this Agreement, the accessibility of online content and functionality will be measured according to the W3C’s Web Content Accessibility Guidelines (WCAG) 2.0 Level AA and the Web Accessibility Initiative Accessible Rich Internet Applications Suite (WAI-ARIA) 1.0 for web content, which are incorporated by reference.
Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.
EBITDA The term “EBITDA” shall mean, with respect to any fiscal period, “Consolidated EBITDA” as defined in the Credit Agreement, provided that the following should also be excluded from the calculation of EBITDA to the extent not already excluded from the calculation of Consolidated EBITDA under the Credit Agreement: (i) Non-Cash Charges (as defined in the Credit Agreement) related to any issuances of equity securities; (ii) fees and expenses relating to the Acquisition; (iii) financing fees (both cash and non-cash) relating to the Acquisition; (iv) covenant-not-to-compete payments to certain members of the Company’s senior management and related expenses; (v) expenses (or any portion thereof) incurred outside of the ordinary course of business that are approved by the Board which the Board determines in its good faith discretion are in the best interest of the Company but which will have a disproportionately adverse impact on the Company’s short term financial performance, affecting the Company’s ability to achieve financial targets related to the vesting of the Class C Units under the Incentive Unit Subscription Agreements or the Company’s annual bonus plan; (vi) costs and expenses incurred in connection with evaluating and consummating acquisitions not contemplated by the Company’s annual plan, as such plan is approved by the Board in good faith; (vii) related party expenditures that are subject to the prior written consent of the Majority Executives pursuant to Section 2.3(a) of the Securityholders Agreement but have failed to receive such consent; (viii) advisors’ fees and expenses incurred outside the ordinary course of business related solely to Vestar’s activities that are unrelated to the Company; (ix) costs associated with any put option or call option contemplated by any Rollover Subscription Agreement or Incentive Unit Subscription Agreement; (x) costs associated with any proposed initial Public Offering or Sale of the Company (as such terms are defined in the Securityholders Agreement); (xi) expenses related to any litigation arising from the Acquisition; (x) management fees and costs related to the activities giving rise to such fees that are paid to, paid for or reimbursed to Vestar and its Affiliates; and (xii) material expenditures or incremental expenditures inconsistent with prior practice (to the extent that prior practice is relevant) required by Board (where Management Managers (as defined in the Securityholders Agreement) unanimously dissent) unless such expenditures are reasonably likely to result in any benefit (whether economic or non-economic) to the Company as determined by the Board in its good faith discretion.
Threshold Neither the Seller nor the Purchaser shall be required to make any indemnification payment pursuant to Section 8.1 or 8.2, respectively, until such time as the total amount of all Damages that have been directly or indirectly suffered or incurred by an Indemnified Party, or to which an Indemnified Party has or otherwise becomes subject to, exceeds $50,000 in the aggregate. At such time as the total amount of such Damages exceeds $50,000 in the aggregate, the Indemnified Party shall be entitled to be indemnified against the full amount of such Damages (and not merely the portion of such Damages exceeding $50,000).