Mechanical Editing Sample Clauses

Mechanical Editing. Editing, however, occurs when a musical track is altered; this usually refers to lengthening or shortening the musical bed so that it fits into a longer or shorter spot. Whenever a music track is mechanically shortened or lengthened to a different music track length, the Musicians whose services are utilized on the shortened or lengthened track shall be paid a dubbing fee. This provision applies to the length of the music track and bears no relationship to the length of the commercial in which said music track is incorporated. For example, three (3) music tracks are recorded in a 2-hour session, of lengths 40 seconds, 30 seconds and 20 seconds. Since it’s a 2-hour session, up to six (6) spots in the same medium may be claimed from the session, utilizing those three music tracks. If two of the three tracks are mechanically edited to lengths of 15 seconds and 10 seconds, then two dubbing fees are required, regardless of whether or not all six spots have been claimed. In television and Internet only, if the video portion of a commercial is mechanically edited to make up to two
Sample 1Sample 2
AutoNDA by SimpleDocs
Mechanical Editing. Use Payments (Including Internet and New Media):– For the payment of two dub fees, a second mechanically-edited commercial is permitted as long as the music tracks of all versions are identical.
Sample 1Sample 2
Mechanical Editing. Nothing contained in this Agreement is intended to permit the mechanical editing of any sound track or recording made hereunder for the purpose of making a shorter or longer version for use hereunder unless the musicians are paid therefore under this Agreement, except as specifically permitted by the section 7.C (1), (2) and 7.D. below.
Sample 1

Related to Mechanical Editing

  • ELECTRONIC WORKFLOW SYSTEM OGS reserves the right to incorporate an electronic workflow system that may include elements of the Authorized User RFQ process. OGS reserves the right to post Authorized User Contract usage of Centralized Contracts. For Lot 4 only, when provided for in the RFQ and resultant Authorized User Agreement, the Authorized Users may reimburse travel expenses. All rules and regulations associated with this travel can be found at xxxx://xxx.xxxxx.xx.xx/agencies/travel/travel.htm. In no case will any travel reimbursement be charged that exceeds these rates. All travel will be paid only as specified within the Authorized User Agreement and must be billed with the associated services on the same Invoice with receipts attached. The Contractor shall receive prior approval from the Authorized User for any travel that occurs during the term of an Authorized User Agreement. Parking fees and/or parking tickets shall not be paid by an Authorized User. Unless otherwise specified in writing by the Authorized User, a vehicle will not be provided by Authorized User to the Contractor for travel. Therefore, the Contractor will be responsible for ensuring that the Contractor has access to an appropriate vehicle (e.g., personal vehicle or rental vehicle) or common carrier with which to carry out any necessary travel. For the Contractor to obtain reimbursement for the use of a rental vehicle, such use must be justified as the most cost- effective mode of transportation under the circumstances (including consideration of the most effective use of time). The Contractor is responsible for keeping adequate records to substantiate any claims for travel reimbursement. All services provided under the resultant Authorized User Agreement must be performed within CONUS. There are no BONDS for this Contract. However, an Authorized User may require in an RFQ a performance, payment or Bid bond, or negotiable irrevocable letter of credit or other form of security for the faithful performance for the resultant Authorized User Agreement. Pursuant to New York State Executive Law Article 15-A and Parts 140-145 of Title 5 of the New York Codes, Rules and Regulations (“NYCRR”), the New York State Office of General Services (“OGS”) is required to promote opportunities for the maximum feasible participation of New York State-certified Minority- and Women-owned Business Enterprises (“MWBEs”) and the employment of minority group members and women in the performance of OGS contracts.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Connectivity User is solely responsible for providing and maintaining all necessary electronic communications with Exchange, including, wiring, computer hardware, software, communication line access, and networking devices.

  • Electronic invoicing The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Electronic Invoicing (eInvoicing The Contractor may supply electronic invoices in lieu of paper-based invoices for those transactions processed through MFMP. Contractor may establish electronic invoicing within ninety (90) days of written request to the Department. Electronic invoices shall be submitted to the Customer through the Ariba Network (AN) in one of three mechanisms as listed below. The Contractor will work with the MFMP management team to obtain specific requirements for the eInvoicing.

  • Electronic Visit Verification ("EVV A. To ensure: 1. the EVV system is used to verify the provision of services governed under 40 TAC, Chapter 68 or its successor; 2. only authorized people access the Contractor's EVV account; 3. all data elements required by HHSC or HHSC's designee are uploaded or entered and maintained in the EVV system completely, accurately, and prior to submitting the claim; 4. that each time services governed by 40 TAC Chapter 68 or its successor are delivered to an individual, the Contractor's staff uses an HHSC-approved EVV system; and 5. service delivery documentation is immediately available for review by HHSC when requested. B. Equipment provided to Contractor by HHSC, HHSC’s designee, or an HHSC-approved EVV vendor, must be returned in good condition when the equipment is no longer needed under this Contract. In the context of this agreement, “good condition” means Contractor must not place any marks or identifying information on the equipment and may not alter information on the equipment including logos and serial numbers. If the equipment is lost, stolen, marked, altered or damaged by Contractor, Contractor may be required to pay the replacement cost for each piece of equipment that is lost, stolen, marked or damaged. Replacement costs for lost, stolen, marked or damaged equipment may be assessed periodically. If Contractor recovers previously lost or stolen equipment for which Contractor paid the replacement cost in the prior 12 months, Contractor may return the equipment and be reimbursed for the replacement costs within 12 months of the date HHSC, HHSC’s designee or an HHSC-approved EVV vendor (as applicable) received payment in full from the Contractor. This is provided the equipment is returned in good condition as specified above. C. HHSC may perform EVV compliance oversight reviews to determine if Contractor has complied with EVV compliance requirements as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC EVV website or EVV Policy Handbook. D. If the Contractor determines an electronic record in the EVV system needs to be adjusted at any time, the Contractor will make the adjustment in the EVV system using the most appropriate EVV reason code number(s), EVV reason code description(s) and enter any required free text when completing visit maintenance in the EVV system, if applicable. E. Contractor must begin using an HHSC-approved EVV system prior to submitting an EVV relevant claim. F. All claims for services required to use EVV (EVV claims) must match to an accepted EVV visit transaction in the EVV Aggregator (the state’s centralized EVV database) prior to reimbursement of an EVV claim. Without a matching accepted EVV visit transaction, the claim will be denied. G. Contractor must submit all EVV related claims through the Texas Medicaid Claims Administrator, or as otherwise described in the EVV Policy posted on the HHSC EVV website or in the EVV Policy Handbook. H. Contractor must complete all required EVV training as outlined in the EVV Policy posted on the HHSC EVV website or EVV Policy Handbook: • Prior to using either an EVV vendor system or an EVV proprietary system and • Yearly thereafter. I. Contractor and, if applicable, the Contractor’s appointed EVV system administrator, must complete, sign and date the EVV Onboarding Form as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC website or EVV Policy Handbook.

  • SPRINKLER SYSTEM If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.

  • TECHNICAL EVALUATION (a) Detailed technical evaluation shall be carried out by Purchase Committee pursuant to conditions in the tender document to determine the substantial responsiveness of each tender. For this clause, the substantially responsive bid is one that conforms to all the eligibility and terms and condition of the tender without any material deviation. The Institute’s determination of bid’s responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence. The Institute shall evaluate the technical bids also to determine whether they are complete, whether required sureties have been furnished, whether the documents have been properly signed and whether the bids are in order. (b) The technical evaluation committee may call the responsive bidders for discussion or presentation to facilitate and assess their understanding of the scope of work and its execution. However, the committee shall have sole discretion to call for discussion / presentation. (c) Financial bids of only those bidders who qualify the technical criteria will be opened provided all other requirements are fulfilled. (d) AIIMS Jodhpur shall have right to accept or reject any or all tenders without assigning any reasons thereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!