Microstation. 1. Two (2) MicroStation licenses at the approximate rate of $2,420.20 per MicroStation license, for a total of $4,840.40 for two (2) MicroStation licenses;
Microstation. The default AutoCAD grey scales: Colours 8, 9, 250, 251, 252, 253, 254 and 255 will plot as grey scales. It is recommended that only colours 250-254 are utilised as grey scales under the CSWD. GREY SCALE The following colours will plot as grey scales 8, 9,14 ,250, 251, 252, 253, 254. It is recommended that only colours 250-254 are utilised as grey scales under the CSWD. GREY SCALE 250 251 252 253 254 250 251 252 253 254 Guidelines Common to AutoCAD and Microstation In addition to the preceeding standards, which are mandatory, the following are guidleines with respect to the application of the standards. Paper Size Format Size (mm) A0 A1 A2 A3 A4 B0* B1 841 X 0000 000 X 000 420 X 594 297 X 420 210 X 000 0000 X 0000 707 X 1000 Drawing Scales * The use of B0 should be kept to a minimum as it exceeds the maximum plot size of most plotters. > Scales should be whole numbers. > Odd scales should be avoided. > The number of scales on any one drawing should be kept to a minimum. > The scale shall be clearly identified under the title of each portion of the drawing. > The scale chosen shall be large enough to permit clear and easy interpretation of the information. > Where different scales are used for horizontal and vertical dimensions, such as on profiles, each scale shall be clearly indicated. English Text Sizes Text Height Width Factor Thickness (mm) 2.0mm 0.80 0.25mm 2.5mm 0.80 0.25mm 3.5mm 0.80 0.35mm 5.0mm 0.80 0.50mm 7.0mm 0.80 0.70mm 10.0mm 0.80 1.00mm 20.0mm 0.80 2.00mm Chinese Text Sizes Text Height Width Factor Thickness (mm) 3.00mm 1.00 0.25mm 3.75mm 1.00 0.25mm 5.25mm 1.00 0.35mm 7.50mm 1.00 0.50mm 10.50mm 1.00 0.70mm 15.00mm 1.00 1.00mm 30.00mm 1.00 2.00mm AutoCAD Special Characters Microstation Special Characters AutoCAD users should use the special characters available from the default ROMANS character map only. The following generic special characters can also be used. %%c for diameter symbol %%d for degrees symbol %%o for placing lines above text %%p for plus/minus symbol %%u for placing lines under text Microstation users should use the special characters available from the default Font 3 (Engineering) only.
Microstation. (V8i dgn): Alignment shall be displayed in one dgn. Utility, topography, and drainage shall be displayed in another dgn. (2 dgn files for the project)
