MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE Sample Clauses

MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 20.1. Every modification of the installation of the specific components for the use of compressed natural gas in the propulsion system of the vehicle shall be notified to the administrative department which approved the vehicle type. The department may then either: 20.1.1. Consider that the modifications made are unlikely to have an appreciably adverse effect and that in any case the vehicle still complies with the requirements; or 20.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 20.2. Confirmation or refusal of approval, specifying the alteration, shall be communicated to the Parties to the Agreement applying this Regulation by means of a form conforming to the model in Annex 2D to this Regulation. 20.3. The competent authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 2D to this Regulation.
Sample 1Sample 2Sample 3See All (11)
AutoNDA by SimpleDocs
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 6.1. Every modification of the vehicle type shall be notified to the administrative department which approved the vehicle type. That department may then either: 6.1.1. consider that the modifications made are unlikely to have an appreciable adverse effect and that, in any case, the vehicle still complies with the requirements; or 6.1.2. require a further test report from the Technical Service responsible for conducting the tests. 6.2. Confirmation of approval, specifying the modifications, shall be communicated by the procedure specified in paragraph 4.3. above to the Contracting Parties to the Agreement which apply this Regulation. 6.3. The Competent Authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 1 to this Regulation.
Sample 1Sample 2See All (5)
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 20.1. Every modification of the installation of the specific equipment for the use of liquefied petroleum gases in the propulsion system of the vehicle shall be notified to the administrative department which approved the vehicle type. The department may then either:
Sample 1Sample 2
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 20.1. Every modification of the installation of the specific components for the use of compressed natural gas in the propulsion system of the vehicle shall be notified to the administrative department which approved the vehicle type. The department may then either: _________________________ 1/ As defined in Annex 7 to the Consolidated Resolution on the Construction of Vehicles (R.E.3) (document TRANS/WP.29/78/Rev.1/Amend.2 as last amended by Amend.4). 20.1.1. Consider that the modifications made are unlikely to have an appreciably adverse effect and that in any case the vehicle still complies with the requirements; or 20.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 20.2. Confirmation or refusal of approval, specifying the alteration, shall be communicated to the Parties to the Agreement applying this Regulation by means of a form conforming to the model in Annex 2D to this Regulation. 20.3. The competent authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conform­ing to the model in Annex 2D to this Regulation.
Sample 1Sample 2
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 20.1. Every modification of the installation of the specific components for the use of compressed natural gas and or liquefied natural gas in the propulsion system of the vehicle shall be notified to the administrative department which approved the vehicle type. The department may then either: 20.1.1. Consider that the modifications made are unlikely to have an appreciably adverse effect and that in any case the vehicle still complies with the requirements; or 20.1.2. Require a further test report from the Technical Service responsible for conducting the tests.
Sample 1Sample 2
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 6.1. Every modification of the approved vehicle type shall be advised to the Administrative Department which granted the type approval. The Administrative Department may then either, 6.1.1. agree that the modifications made are unlikely to have an appreciable effect and that in any case the modified vehicle type still complies with the requirements of this Regulation and constitutes part of a family of vehicle types together with the approved vehicle type; or 6.1.2. require a further test report from the technical service responsible for conducting the tests to prove that the new vehicle type complies with the requirements of this Regulation and constitutes part of a group of vehicle types together with the approved vehicle type; or 6.1.3. refuse the extension of approval and require a new approval procedure to be carried out. 6.2. The decisions of the Administrative Department and the technical service shall be based on the threefold criteria of the worst case: 6.2.1. the structural criterion means whether the superstructure is changed or not (see Annex 4). If no change, or the new superstructure is stronger, this is favourable. 6.2.2. the energy criterion means whether the reference energy is changed or not. If the new vehicle type has the same or smaller reference energy than the approved one, this is favourable. 6.2.3. residual space criterion is based on the envelope surface of the residual space. If the residual space of the new vehicle type is everywhere within the approved case residual space, this is favourable. 6.3. If all three criteria described in paragraph 6.2. are changed favourably, the extension of the approval shall be granted without further investigation. If all of three answers are unfavourable, a new approval procedure is required. If the answers are mixed, further investigations (tests, calculation, structural analysis, for example) will be required. These investigations shall be determined by the technical service cooperating with the manufacturer. 6.4. Confirmation or refusal of approval, specifying the alterations, shall be notified by the procedure specified in paragraph 4.3. above to the Parties to the Agreement which apply this Regulation. 6.5. The Administrative Department issuing the extension of approval shall assign a series number to each communication form drawn up for such an extension.
Sample 1
MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE. 21.1. Every modification of the installation of the specific components for the use of compressed natural gas and/or liquefied natural gas in the propulsion system of the vehicle shall be notified to the administrative department which approved the vehicle type. The department may then either: E/ECE/324 E/ECE/TRANS/505 Regulation No. 110 page 34  Rev.2/Add.109/Rev.1 21.1.1. Consider that the modifications made are unlikely to have an appreciably adverse effect and that in any case the vehicle still complies with the requirements; or 21.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 21.2. Confirmation or refusal of approval, specifying the alteration, shall be communicated to the Parties to the Agreement applying this Regulation by means of a form conforming to the model in Annex 2D to this Regulation. 21.3. The competent authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 2D to this Regulation.
Sample 1
AutoNDA by SimpleDocs

Related to MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE

  • Modification, Extension and Renewal of Options The Board or a duly appointed committee thereof, may modify, extend or renew this Option or accept the surrender thereof (to the extent not theretofore exercised) and authorize the granting of a new option in substitution therefore (to the extent not theretofore exercised), subject at all times to the Code and applicable securities laws. Notwithstanding the foregoing provisions of this Section 12, no modification shall, without the consent of the Recipient, alter to the Recipient’s detriment or impair any rights of Recipient hereunder.

  • Modification and Waivers The Indenture permits, with certain exceptions as therein provided (including, but not limited to the exceptions set forth in Section 15.11(i)), the amendment of the Indenture and the modification of the rights and obligations of the Issuer and the rights of the holders of the Notes under the Indenture at any time by the Issuer with the consent of the holders of not less than 66 2/3% in aggregate principal amount of the series of Notes of which this Note is a part then outstanding and all other Securities (as defined in the Indenture) then outstanding under the Indenture and affected by such amendment and modification. The Indenture also contains provisions permitting the holders of a majority in aggregate principal amount of the series of Notes of which this Note is a part then outstanding and all other Securities then outstanding under the Indenture and affected thereby, on behalf of the holders of all such Securities, to waive compliance by the Issuer with certain provisions of the Indenture and certain past defaults under the Indenture and their consequences. Any such consent or waiver by the holder of this Note shall be conclusive and binding upon such holder and upon all future holders of this Note and of any Note issued upon the registration of transfer hereof or in exchange herefor or in lieu hereof whether or not notation of such consent or waiver is made upon this Note. The determination of whether particular Securities are “outstanding” will be made in accordance with the Indenture. Any action by the holder of this Note shall bind all future holders of this Note, and of any Note issued in exchange or substitution hereof or in place hereof, in respect of anything done or permitted by the Issuer or by the Trustee in pursuance of such action. New Notes authenticated and delivered after the execution of any agreement modifying, amending or supplementing this Note may bear a notation in a form approved by the Issuer as to any matter provided for in such modification, amendment or supplement to the Indenture or the Notes. New Notes so modified as to conform, in the opinion of the Issuer, to any provisions contained in any such modification, amendment or supplement may be prepared by the Issuer, authenticated by the Trustee and delivered in exchange for this Note.

  • Modification of Agreement This Agreement may be modified, amended, suspended or terminated, and any terms or conditions may be waived, but only by a written instrument executed by the parties hereto.

  • Modification and Waiver No supplement, modification or amendment of this Agreement shall be binding unless executed in writing by the parties hereto. No waiver of any of the provisions of this Agreement shall be deemed or shall constitute a waiver of any other provisions of this Agreement nor shall any waiver constitute a continuing waiver.

  • Enforcement of Due-on-Sale Clauses; Assumption and Modification Agreements; Certain Assignments (a) When any Mortgaged Property is conveyed by the Mortgagor, the Master Servicer or Subservicer, to the extent it has knowledge of such conveyance, shall enforce any due-on-sale clause contained in any Mortgage Note or Mortgage, to the extent permitted under applicable law and governmental regulations, but only to the extent that such enforcement will not adversely affect or jeopardize coverage under any Required Insurance Policy. Notwithstanding the foregoing: (i) the Master Servicer shall not be deemed to be in default under this Section 3.13(a) by reason of any transfer or assumption which the Master Servicer is restricted by law from preventing; and (ii) if the Master Servicer determines that it is reasonably likely that any Mortgagor will bring, or if any Mortgagor does bring, legal action to declare invalid or otherwise avoid enforcement of a due-on-sale clause contained in any Mortgage Note or Mortgage, the Master Servicer shall not be required to enforce the due-on-sale clause or to contest such action. (b) Subject to the Master Servicer's duty to enforce any due-on-sale clause to the extent set forth in Section 3.13(a), in any case in which a Mortgaged Property is to be conveyed to a Person by a Mortgagor, and such Person is to enter into an assumption or modification agreement or supplement to the Mortgage Note or Mortgage which requires the signature of the Trustee, or if an instrument of release signed by the Trustee is required releasing the Mortgagor from liability on the Mortgage Loan, the Master Servicer is authorized, subject to the requirements of the sentence next following, to execute and deliver, on behalf of the Trustee, the assumption agreement with the Person to whom the Mortgaged Property is to be conveyed and such modification agreement or supplement to the Mortgage Note or Mortgage or other instruments as are reasonable or necessary to carry out the terms of the Mortgage Note or Mortgage or otherwise to comply with any applicable laws regarding assumptions or the transfer of the Mortgaged Property to such Person; provided, however, none of such terms and requirements shall either (i) both (A) constitute a "significant modification" effecting an exchange or reissuance of such Mortgage Loan under the REMIC Provisions and (B) cause any portion of any REMIC formed under the Series Supplement to fail to qualify as a REMIC under the Code or (subject to Section 10.01(f)), result in the imposition of any tax on "prohibited transactions" or (ii) constitute "contributions" after the start-up date under the REMIC Provisions. The Master Servicer shall execute and deliver such documents only if it reasonably determines that (i) its execution and delivery thereof will not conflict with or violate any terms of this Agreement or cause the unpaid balance and interest on the Mortgage Loan to be uncollectible in whole or in part, (ii) any required consents of insurers under any Required Insurance Policies have been obtained and (iii) subsequent to the closing of the transaction involving the assumption or transfer (A) the Mortgage Loan will continue to be secured by a first mortgage lien pursuant to the terms of the Mortgage, (B) such transaction will not adversely affect the coverage under any Required Insurance Policies, (C) the Mortgage Loan will fully amortize over the remaining term thereof, (D) no material term of the Mortgage Loan (including the interest rate on the Mortgage Loan) will be altered nor will the term of the Mortgage Loan be changed and (E) if the seller/transferor of the Mortgaged Property is to be released from liability on the Mortgage Loan, such release will not (based on the Master Servicer's or Subservicer's good faith determination) adversely affect the collectability of the Mortgage Loan. Upon receipt of appropriate instructions from the Master Servicer in accordance with the foregoing, the Trustee shall execute any necessary instruments for such assumption or substitution of liability as directed in writing by the Master Servicer. Upon the closing of the transactions contemplated by such documents, the Master Servicer shall cause the originals or true and correct copies of the assumption agreement, the release (if any), or the modification or supplement to the Mortgage Note or Mortgage to be delivered to the Trustee or the Custodian and deposited with the Mortgage File for such Mortgage Loan. Any fee collected by the Master Servicer or such related Subservicer for entering into an assumption or substitution of liability agreement will be retained by the Master Servicer or such Subservicer as additional servicing compensation. (c) The Master Servicer or the related Subservicer, as the case may be, shall be entitled to approve a request from a Mortgagor for a partial release of the related Mortgaged Property, the granting of an easement thereon in favor of another Person, any alteration or demolition of the related Mortgaged Property (or, with respect to a Cooperative Loan, the related Cooperative Apartment) without any right of reimbursement or other similar matters if it has determined, exercising its good faith business judgment in the same manner as it would if it were the owner of the related Mortgage Loan, that the security for, and the timely and full collectability of, such Mortgage Loan would not be adversely affected thereby and that any portion of any REMIC formed under the Series Supplement would not fail to continue to qualify as a REMIC under the Code as a result thereof and (subject to Section 10.01(f)) that no tax on "prohibited transactions" or "contributions" after the startup day would be imposed on any such REMIC as a result thereof. Any fee collected by the Master Servicer or the related Subservicer for processing such a request will be retained by the Master Servicer or such Subservicer as additional servicing compensation. (d) Subject to any other applicable terms and conditions of this Agreement, the Trustee and Master Servicer shall be entitled to approve an assignment in lieu of satisfaction with respect to any Mortgage Loan, provided the obligee with respect to such Mortgage Loan following such proposed assignment provides the Trustee and Master Servicer with a "Lender Certification for Assignment of Mortgage Loan" in the form attached hereto as Exhibit M, in form and substance satisfactory to the Trustee and Master Servicer, providing the following: (i) that the substance of the assignment is, and is intended to be, a refinancing of such Mortgage; (ii) that the Mortgage Loan following the proposed assignment will have a rate of interest at least 0.25 percent below or above the rate of interest on such Mortgage Loan prior to such proposed assignment; and (iii) that such assignment is at the request of the borrower under the related Mortgage Loan. Upon approval of an assignment in lieu of satisfaction with respect to any Mortgage Loan, the Master Servicer shall receive cash in an amount equal to the unpaid principal balance of and accrued interest on such Mortgage Loan and the Master Servicer shall treat such amount as a Principal Prepayment in Full with respect to such Mortgage Loan for all purposes hereof.

  • Amendment, Extension and Waiver Subject to applicable law, at any time prior to the consummation of the transactions contemplated by this Agreement, the parties may (a) amend this Agreement, (b) extend the time for the performance of any of the obligations or other acts of either party hereto, (c) waive any inaccuracies in the representations and warranties contained herein or in any document delivered pursuant hereto, or (d) waive compliance with any of the agreements or conditions contained in Articles V and VI hereof or otherwise; provided, however, that after any approval of the transactions contemplated by this Agreement by Innes Street's shareholders, there may not be, without further approval of such shareholders, any amendment of this Agreement which reduces the amount or changes the form of the consideration to be delivered to Innes Street shareholders hereunder other than as contemplated by this Agreement. This Agreement may not be amended except by an instrument in writing authorized by the respective Boards of Directors and signed, by duly authorized officers, on behalf of the parties hereto. Any agreement on the part of a party hereto to any extension or waiver shall be valid only if set forth in an instrument in writing signed by a duly authorized officer on behalf of such party, but such waiver or failure to insist on strict compliance with such obligation, covenant, agreement or condition shall not operate as a waiver of, or estoppel with respect to, any subsequent or other failure.

  • AMENDMENTS TO APPLICATION AND AGREEMENT; WAIVERS A. This Agreement may not be modified or amended except by an instrument or instruments in writing signed by all of the Parties and after completing the requirements of Section

  • Amendments, Modifications and Waivers No amendment, modification or waiver in respect of this Agreement shall be effective against any party unless it shall be in writing and signed by Parent, the Company and Stockholder.

  • Extension of Agreement Prior to the original expiration date of this Agreement, the Parties mutually agree to extend this Agreement to the February 15 extension date identified in Paragraph VIII(A). The Parties acknowledge that no further extensions of this Agreement are authorized.

  • Ratification and Confirmation of Agreement In the event of a conflict between the terms of this Amendment and the Agreement, it is the intention of the parties that the terms of this Amendment shall control and the Agreement shall be interpreted on that basis. To the extent the provisions of the Agreement have not been amended by this Amendment, the parties hereby confirm and ratify the Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!