Notification of Readiness for Interim Inspection for Punchlist Completion Sample Clauses

Notification of Readiness for Interim Inspection for Punchlist Completion. Not more than 30 days after Material Completion, and upon completion of the Final Punchlist (including all Minor Items and such Permitted Incomplete Items as are due to be completed), the Contractor shall give the Design Professional and Owner written notice requesting inspection for Final Completion in the following words: “The work on the Contract for the [SHOW NAME OF PROJECT AS IT APPEARS IN THE CONTRACT] having been 100% completed, except for Permitted Incomplete Work not yet due to be completed, it is requested that an Inspection for Final Completion be made promptly by the Design Professional in accordance with Section 6 of the General Requirements.” No Inspection for Interim Inspection for Punchlist Completion shall be made until such time as the Design Professional and Owner have received notice in the exact form indicated above. In the event the Contractor shall have issued the "Notice of Readiness for Interim Inspection for Punchlist Completion " prematurely, hereinafter referred to as a "false start," the Contractor shall be liable for the damage resulting from the false start including, but not limited to, the salaries, professional fees, and travel and living expenses of the persons or parties inconvenienced by the false start.
AutoNDA by SimpleDocs
Notification of Readiness for Interim Inspection for Punchlist Completion. The Design Professional shall conduct the Interim Inspection for Punchlist Completion. The Design Professional shall confirm the Final Punch List has been completed including all Minor Items. Upon successful completion of the inspection, the Design Professional shall issue a Report of Interim Inspection for Punchlist Completion, noting any Permitted Incomplete Work which remains to be accomplished and the date by which it is to be completed. In the event all Permitted Incomplete Work has been completed at the time of this Interim Inspection, and the Design Professional so certifies, then this inspection shall be deemed an Inspection for Final Completion. In the event any Minor Item is determined to be incomplete, the Owner may give the fourteen (14) day notice of failure to complete the Work set forth in Section 6.2.3.
Notification of Readiness for Interim Inspection for Punchlist Completion. Not more than 30 days after Material Completion, and upon completion of the Final Punchlist (including all Minor Items and such Permitted Incomplete Items as are due to be completed), the Design-Builder shall give the Program Manager and Owner written notice requesting inspection for Final Completion in the following words: No Inspection for Interim Inspection for Punchlist Completion shall be made until such time as the Program Manager and Owner have received notice in the exact form indicated above. In the event the Design-Builder shall have issued the "Notice of Readiness for Interim Inspection for Punchlist Completion " prematurely, hereinafter referred to as a "false start," the Design-Builder shall be liable for the damage resulting from the false start including, but not limited to, the salaries, professional fees, and travel and living expenses of the persons or parties inconvenienced by the false start.
Notification of Readiness for Interim Inspection for Punchlist Completion. Not more than 30 days after Material Completion, and upon completion of the Final Punchlist (including all Minor Items and such Permitted Incomplete Items as are due to be completed), the CM/GC shall give the Design Professional and Owner written notice requesting inspection for Final Completion in the following words: No Inspection for Interim Inspection for Punchlist Completion shall be made until such time as the Design Professional and Owner have received notice in the exact form indicated above. In the event the CM/GC shall have issued the "Notice of Readiness for Interim Inspection for Punchlist Completion " prematurely, hereinafter referred to as a "false start," the CM/GC shall be liable for the damage resulting from the false start including, but not limited to, the salaries, professional fees, and travel and living expenses of the persons or parties inconvenienced by the false start.

Related to Notification of Readiness for Interim Inspection for Punchlist Completion

  • Project Completion Report At the completion of construction and once a Project is placed in service, the Subrecipient must submit a Project Completion Report that includes the total number of units built and leased, affordable units built and leased, DR-MHP units built and leased, an accomplishment narrative, and the tenants names, demographics and income for each DR-MHP unit.

  • Response/Compliance with Audit or Inspection Findings A. Grantee must act to ensure its and its Subcontractors’ compliance with all corrections necessary to address any finding of noncompliance with any law, regulation, audit requirement, or generally accepted accounting principle, or any other deficiency identified in any audit, review, inspection or investigation of the Grant Agreement and the services and Deliverables provided. Any such correction will be at Grantee’s or its Subcontractor's sole expense. Whether Xxxxxxx's action corrects the noncompliance shall be solely the decision of the System Agency. B. As part of the services, Grantee must provide to HHS upon request a copy of those portions of Grantee's and its Subcontractors' internal audit reports relating to the services and Deliverables provided to the State under the Grant Agreement. C. Grantee shall include the requirement to provide to System Agency (and any of its duly authorized federal, state, or local authorities) internal audit reports related to this Grant Agreement in any Subcontract it awards. Upon request by System Agency, Grantee shall enforce this requirement against its Subcontractor. Further, Grantee shall include in any Subcontract it awards a requirement that all Subcontractor Subcontracts must also include these provisions.

  • Time for Completion The Contractor shall deliver the material and/or services called for in the specifications/proposal and within the delivery time specified and in accordance with the terms of the contract. Work shall be completed within 30 days from the Notice to Proceed issued by the City of Sparks Purchasing Division. The Contractor shall not alter or vary any terms or conditions contained or incorporated herein, including but not limited to, the quantity, price, delivery date or date designated as After Receipt of Order (ARO) or date for commencement or completion of services as mutually agreed upon, unless such alteration or variation is consented to in writing by a duly authorized representative of the City. The City reserves the right to cancel resultant Contract upon ten days written notice in the event the type and quality of the product or work performance is unsatisfactory or in default, subject to Contractor’s right to cure as outlined in termination clause. This is a non-exclusive Contract and the City reserves the right to acquire the material and/or services at its discretion, from other sources during the term of this Contract.

  • Notice to Proceed Work shall not commence on this Project until the Director has issued a written Notice to Proceed to the Recipient. Such Notice will not be issued until the Director is assured that the Recipient has complied with the Recipient's responsibilities concerning OEPA plan approval, when applicable. A Notice to Proceed shall be required for all project prime contractors or direct procurement initiated by the Recipient following execution of this Agreement.

  • Inspection/Testing In order to assess Supplier’s work quality and/or compliance with this Order, upon reasonable notice by Buyer: (a) all goods, materials and services related to the items purchased hereunder, including, raw materials, components, assemblies, work in process, tools and end products shall be subject to inspection and testing by Buyer, its customer, representative or regulatory authorities at all places, including sites where the goods are made or located or the services are performed, whether at Supplier’s premises or elsewhere; and (b) all of Supplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer or its designee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Supplier shall notify Buyer in writing at least twenty (20) days prior to each of Supplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspect or test goods, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall not relieve Supplier from its warranty obligations or any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request.

  • Completion of Repairs Borrower will commence any Repairs as soon as practicable after the date of this Loan Agreement and will diligently proceed with and complete such Repairs on or before the Completion Date. All Repairs and Capital Replacements will be completed in a good and workmanlike manner, with suitable materials, and in accordance with good building practices and all applicable laws, ordinances, rules, regulations, building setback lines and restrictions applicable to the Mortgaged Property. Borrower agrees to cause the replacement of any material or work that is defective, unworkmanlike or that does not comply with the requirements of this Loan Agreement, as determined by Lender.

  • Notice of Completion The Interconnection Customer shall notify the Transmission Provider and the Interconnected Transmission Owner in writing when it has completed construction of (i) the Customer Facility;

  • Inspection Period Purchaser shall have a period of time commencing on the Effective Date and expiring at 5:00 p.m., Dallas, Texas time on June 17, 1998 (the "Inspection Period") within which to examine the Property and to conduct its feasibility study thereof. Seller agrees that, during the Inspection Period, Seller will allow Purchaser and Purchaser's agents access to the Property during normal business hours to conduct soil and engineering, hazardous waste, marketing, feasibility, zoning and other studies or tests and to otherwise determine the feasibility of the Property for Purchaser's intended use; provided, however, that prior to conducting any invasive testing with respect to the Land or Improvements, or any tests or studies which could cause any damage to the Land or Improvements, Purchaser must advise Seller in writing (which notice shall state in reasonable detail the nature and extent of such proposed testing) of its intent to conduct such tests or studies and Seller may, in its reasonable discretion, refuse to approve any such tests or studies, in which event Purchaser's sole remedy shall be to terminate this Contract pursuant to Section 5.2 hereof and receive a refund of the Xxxxxxx Money Deposit, all as provided in said Section 5.2. Seller agrees that, during the Inspection Period, Seller will allow Purchaser and Purchaser's agents to conduct interviews with the Tenants set forth on Schedule 5.1 attached hereto and made a part hereof, and with those certain Tenants which Purchaser notifies Seller in writing during the Inspection Period that Purchaser desires to conduct interviews and which Seller consents to, which consent shall not be unreasonably withheld, provided that such interviews shall take place during normal business hours after reasonable notice (which may be by telephone) to Seller, and such interviews shall be conducted only in the presence of one of Seller's representatives. Not withstanding the foregoing, (a) the costs and expenses of Purchaser's investigation shall be borne solely by Purchaser, (b) prior to the expiration of the Inspection Period, Purchaser shall restore the Property to the condition which existed prior to Purchaser's entry thereon and investigation thereof to the extent the condition of the Property was affected by or as a result of the actions of Purchaser or its agents, contractors or representatives, (c) Purchaser shall not, in Seller's reasonable opinion, materially interfere, interrupt or disrupt the operation of Seller's business on the Property and, further, such access by Purchaser and/or its agents shall be subject to the rights of Tenants under Tenant Leases, (d) in the event the transaction contemplated by this Contract does not close for any reason, Purchaser shall deliver to Seller a descriptive listing of all tests, reports and inspections conducted by Purchaser with respect to the Property and deliver copies thereof to Seller (excluding, however, any proprietary development or marketing materials), (e) Purchaser shall not permit any mechanic's or materialman's liens or any other liens to attach to the Property by reason of the performance of any work or the purchase of any materials by Purchaser or any other party on Purchaser's behalf in connection with any studies or tests conducted pursuant to this Section 5.1, (f) Purchaser shall give notice (which may be by telephone) to Seller a reasonable time prior to entry onto the Property and shall permit Seller to have a representative present during all investigations and inspections conducted with respect to the Property, and (g) Purchaser shall take all reasonable actions and implement all protections necessary to ensure that all actions taken in connection with the investigations and inspections of the Property, and all equipment, materials and substances generated, used or brought onto the Property pose no material threat to the safety of persons or the environment and cause no damage to the Property or other property of Seller or other persons. All information made available by Seller to Purchaser in accordance with this Contract or obtained by Purchaser in the course of its investigations shall be treated as confidential information by Purchaser, and, prior to the purchase of the Property by Purchaser, Purchaser shall use its best efforts to prevent its agents and employees from divulging such information to any third parties except (i) as reasonably necessary to third parties engaged by Purchaser for the limited purpose of analyzing and investigating such information for the purpose of consummating the transaction contemplated by this Contract, including Purchaser's attorneys and representatives, prospective lenders and engineers or (ii) as may required by applicable law, unless such information is generally available to the public or is disclosed by a party other than Purchaser or its agents. Purchaser shall indemnify, defend and hold Seller harmless for, from and against any and all claims, liabilities, causes of action, damages, liens, losses, costs and expenses (including, without limitation, reasonable attorneys' fees) incident to, resulting from or in any way arising out of any of Purchaser's and its agents', contractors' and representatives' activities on the Property, including, without limitation, any tests or inspections conducted by Purchaser or its agents, contractors or representatives on the Property. The agreements contained in this Section 5.1 shall survive the Closing and not be merged therein and shall also survive any termination of this Contract.

  • Inspection; Acceptance The Contractor (immixTechnology, Inc.) can only, and shall only tender for acceptance those items that substantially conform to the software manufacturer’s (“Qualtrics”) published specifications. Therefore, items delivered shall be considered accepted upon delivery. The Government reserves the right to inspect or test any supplies or services that have been delivered. The Government may require repair or replacement of nonconforming supplies or re-performance of nonconforming services at no increase in contract price. If repair/replacement or re-performance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-(1) Within the warranty period; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

  • Inspection Checklist (Check one)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!