Project Steering Committee 1. For a sound implementation and management of the project, a steering committee shall be set up in line with provisions of the programme manual.
2. The steering committee is the decision-making body of the project and it shall be composed by representatives of the LP and all PPs duly authorised to represent the respective LP and PP institutions. It shall be chaired by the LP and it shall meet on a regular basis. Associated partners shall be invited to take part in the steering committee in an advisory capacity. External key stakeholders may also be invited to take part to one or more meetings in an observer/advisory capacity.
3. The steering committee shall at least:
a. be responsible for monitoring and validating the implementation of the project and the achievement of the planned results as in the approved application form;
b. perform the financial monitoring of the project implementation and to decide on any budget modifications as in § 11 of this agreement;
c. monitor and manage deviations of the project implementation;
d. decide on project modifications (e.g. partnership, budget, activities, and duration) if needed;
e. be responsible for the settlement of any disputes within the partnership (as stipulated in § 22 of this agreement).
4. Further aspects, including the creation of sub-groups or task forces, may be set out in the rules of procedure of the steering committee.
MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.
Joint Steering Committee Promptly after the Effective Date, the Parties will form a Joint Steering Committee (the “JSC”) composed of an equal number of employees of each of Curis and Genentech, but in no event to exceed four (4) members from each Party. The JSC shall determine the specific goals for the Collaboration, shall manage the ongoing research conducted under the Collaboration in accordance with the Research Plan, shall monitor the progress and results of such work, and shall oversee and coordinate the development and commercialization of Compounds (other than Collaboration Products); provided, however, that the JSC shall not have decision-making authority with respect to the development and commercialization of Collaboration Products, which shall be governed by the CSC. The presence of at least one (1) representative of each Party shall constitute a quorum for the conduct of any JSC meeting. All decisions of the JSC shall require unanimous approval, with the representatives of each Party collectively having one (1) vote, provided in the event of a deadlock, the issue shall be referred to the Chief Executive Officer of Curis and the Senior Vice President of Research of Genentech, or their respective designees, who shall promptly meet and attempt in good faith to resolve such issue within thirty (30) days. If such executives cannot resolve such matter, then Genentech shall have final decision-making authority with regard to decisions regarding the Collaboration (including, without limitation, the JSC’s designation of a Compound as either a Lead Product or Excluded Product); provided, however, that in no event shall Genentech have the right or power to take any of the following actions without the approval of Curis’ representatives on the JSC:
(a) approve the initial Research Plan (an outline of which has been agreed upon by the Parties as of the Effective Date);
(b) amend or modify this Agreement or the Research Plan;
(c) resolve any such matter in a manner that conflicts with the provisions of this Agreement (including, without limitation, the Research Plan);
(d) make any decision with respect to the development or commercialization of Curis Products; or
(e) make any decision with respect to the prosecution, maintenance, defense or enforcement of any Curis Patents. The JSC shall meet at such frequency as the JSC agrees, except that, until the filing of the first IND for a Lead Product utilizing Systemic Delivery in a Major Market, the JSC shall meet on at least a quarterly basis. Meetings of the JSC, and JSC dispute resolution meetings between Curis’ Chief Executive Officer and Genentech’s Senior Vice President of Research (or their designees), may be conducted by videoconference, teleconference or in person, as agreed by the Parties, and the Parties shall agree upon the time and place of meetings. A reasonable number of additional representatives of a Party may attend meetings of the JSC in a non-voting capacity. The JSC shall exist for so long as either any work is being conducted under the Research Plan or any Compound is being developed or commercialized by Genentech, Curis, or any of their respective Affiliate(s) or sublicensee(s) in any Major Market. The JSC shall also be responsible for designating one or more representatives of each Party with expertise in patent law (which individuals need not be members of the JSC) to oversee intellectual property matters relating to the Collaboration, subject to the provisions of Article 10, and such patent committee shall coordinate with and report to the JSC.
Condominiums/Planned Unit Developments If the Mortgaged Property is a condominium unit or a planned unit development (other than a de minimis planned unit development) such condominium or planned unit development project such Mortgage Loan was originated in accordance with, and the Mortgaged Property meets the guidelines set forth in the Originator's Underwriting Guidelines;
Joint Occupational Health and Safety Committee The Employer and the Union recognize the role of the joint Occupational Health and Safety Committee in promoting a safe and healthful workplace. The parties agree that a Joint Occupational Health and Safety Committee shall be established for each Employer covered by this Collective Agreement. The Committee shall govern itself in accordance with the provisions of the Industrial Health and Safety Regulations made pursuant to the Workers’ Compensation Act. The Committee shall be as between the Employer and the Union, with equal representation, and with each party appointing its own representatives. Representatives of the Union shall be chosen by the Union membership or appointed by the Union. All minutes of the meetings of the Joint Occupational Health & Safety Committee will be recorded in a mutually agreeable format and will be sent to the Union. The Union further agrees to actively pursue with the other Health Care Unions a Joint Union Committee for the purposes of this Article. The Employer agrees to provide or cause to be provided to Employer members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. The Union agrees to provide or cause to be provided to Union members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. Such training and orientation shall take place within six (6) months of taking office.
Joint Commercialization Committee As of the Effective Date, the Parties have established a joint commercialization committee (the “Joint Commercialization Committee” or the “JCC”), composed of up to [ * ] representatives of each Party, to monitor and discuss the Commercialization of Products at the operational level. Each JCC representative shall have knowledge and expertise in the commercialization of products similar to Products. The JCC shall in particular:
(a) review and recommend the Commercialization Plans and related activities with respect to the Commercialization of Products in the Collaborator Territory, and report to the JEC on all significant Commercialization activities in the Collaborator Territory;
(b) provide a forum for and facilitate communications and coordination between the Parties with respect to the Commercialization of Products in the Collaborator Territory and the Exelixis Territory;
(c) on an annual basis, discuss and establish Collaborator’s Minimum Commercial Performance thresholds pursuant to Section 6.3(b) and propose recommendation to JEC; [ * ] = Certain confidential information contained in this document, marked by brackets, has been omitted and filed separately with the Securities and Exchange Commission pursuant to Rule 24b-2 of the Securities Exchange Act of 1934, as amended.
(d) review the status of material Product manufacturing and supply activities and strategies associated with Commercialization;
(e) review and discuss the major findings of Collaborator’s market research with respect to any Product in the Collaborator Territory, if any;
(f) review and oversee the branding and product positioning strategy for Products in the Collaborator Territory and evaluate Collaborator’s brand strategy for the Product in the Collaborator Territory for consistency with the then-current global brand strategy for the Product;
(g) discuss Product list price and status of reimbursement in the Collaborator Territory; and
(h) perform such other functions as may be appropriate to further the purposes of this Agreement with respect to the Commercialization of Products, including endeavoring to resolve any disputes between the Parties arising from the deliberations of the JCC, or as otherwise directed by the JEC.
Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.
Development Budget Attached hereto as Exhibit "B" and incorporated herein by this reference is the Development Budget in an amount equal to $_____________. Owner acknowledges and represents that the attached Development Budget includes the total costs and expenses to acquire, develop, renovate and construct the Real Property and the Apartment Housing.
Local Professional Development Committee A. There shall be a Local Professional Development Committee (LPDC) to oversee, review, and approve individual professional development plans (IPDP) for course work, continuing education units and/or other equivalent activities.
1. The LPDC shall be responsible to recommend for the Superintendent’s approval, all in-service activities and workshops offered in the district during the school year for staff professional development.
2. Recommendations for District Workshops and In-Service activities should be submitted to the LPDC for approval and recommendation no later than the last school day of the year prior to the year it will be implemented.
3. The LPDC chair shall review and approve all “Professional Growth Reimbursement Application” forms.
B. The LPDC shall consist of three (3) teachers appointed by the Association President and two (2) members appointed by the Superintendent. One of the Superintendent's appointees will be a Principal employed by the district.
C. Appointments shall be for two (2) years with half of the committee members being appointed every other year.
1. Appointments shall be made on or before May 1.
2. The Appointments shall be made by each party outlined above, notifying the other of those appointed.
3. In the event of a vacancy, the committee members shall be replaced in accordance with "B." above.
4. The Association shall name a fourth teacher member and the Superintendent shall name a third administrative member to serve as alternates and attend trainings. These two (2) people shall act as substitutes when a committee member is absent.
D. This committee shall meet monthly.
1. The committee may also be convened by the request of two sitting members.
2. A quorum shall consist of five (5) members. When administrative licenses/certificates are reviewed, two (2) sitting teacher members will abstain and the decision will be decided by three (3) members.
3. If the committee determines it is needed, they will be provided two (2) professional release days to meet during regular school hours. Substitutes will be provided for the committee members on these release days.
4. Committee members shall be provided an additional annual stipend of $1,000 for meetings beyond the normal work day or year. This stipend shall be paid in two (2) semi-annual payments. Any member who fails to serve the full year shall have the above compensation prorated on a monthly basis for each month served.
5. Decisions of the LPDC will be made by consensus of the committee members present.
6. The committee minutes shall be prepared and maintained in compliance with the laws governing the operation of committees of public bodies.
Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.
