Ongoing Conformance Sample Clauses

Ongoing Conformance. The Licensed Products, Packaging, nutritional labels, ingredient lists, taste, quality, and Advertising Materials must conform in all material respects to the final production samples or finished materials approved by Friday’s. At any time (and from time to time) during the Term, upon receipt of a written request from Friday’s, Licensee will promptly provide to Friday’s a reasonable number of samples of the Licensed Products, Packaging, nutritional labels, ingredient lists, or Advertising Materials, at no cost to Friday’s, for quality control inspection. The value of all samples furnished to Friday’s shall not be included in the calculation of Gross Sales. In the event Friday’s reasonably determines that: (i) any Licensed Products, Packaging, nutritional labels, ingredient lists, taste, quality, or Advertising Materials do not conform in quality to samples previously approved by Friday’s; (ii) the quality of a Licensed Product originally approved by Friday’s has deteriorated in later production runs; (iii) the Licensed Product is adulterated or mis-branded within the meaning of the Federal Food, Drug and Cosmetic Act of June 25, 1938, as amended, or within the meaning of any state or other food and drug law or otherwise in violation of any law or regulation; (iv) the Licensed Product is un-saleable as a consumer food in the course of retail trade; or (v) the Licensed Products, Packaging, nutritional labels, ingredient lists, taste, quality, or Advertising Materials have been altered, damaged, or do not meet the then existing standards of Friday’s, Friday’s may, in addition to other remedies available to it, consult with Licensee to determine whether a Recall of the Licensed Product is appropriate under the circumstances and based on Licensee’s Recall Protocol.
Sample 1
AutoNDA by SimpleDocs

Related to Ongoing Conformance

  • Year 2000 Compliance Each Party warrants that it has implemented a program the goal of which is to ensure that all software, hardware and related materials (collectively called “Systems”) delivered, connected with BellSouth or supplied in the furtherance of the terms and conditions specified in this Agreement: (i) will record, store, process and display calendar dates falling on or after January 1, 2000, in the same manner, and with the same functionality as such software records, stores, processes and calendar dates falling on or before December 31, 1999; and (ii) shall include without limitation date data century recognition, calculations that accommodate same century and multicentury formulas and date values, and date data interface values that reflect the century.

  • Quality of Materials and workmanship The Contractor shall ensure that the Construction, Materials and workmanship are in accordance with the requirements specified in this Agreement, Specifications and Standards and Good Industry Practice.

  • Financial Viability and Regulatory Compliance 2.6.1 Contractor warrants and represents that its corporate entity is in good standing with all applicable federal, state, and local licensing authorities and that it possesses all requisite licenses to perform the services required by this contract. Contractor further warrants and represents that it owes no outstanding delinquent federal, state or local taxes or business assessments. 2.6.2 Contractor agrees to promptly disclose to the MPHA any IRS liens or licensure suspension or revocation that may adversely affect its capacity to perform the services outlined within this contract. The failure by Contractor to disclose such issue to the MPHA in writing within 5 days of such notification received will constitute a material breach of this contract. 2.6.3 Contractor further agrees to promptly disclose to the MPHA any change of more than 50% of its ownership and/or any declaration of bankruptcy that Contractor may undergo during the term(s) of this contract. The failure of Contractor to disclose any change of more than 50% of its ownership and/or its declaration of bankruptcy within 5 days of said actions shall constitute a material breach of this contract. 2.6.4 All disclosures made pursuant to this section of the contract shall be made in writing and submitted to MPHA within the time periods required herein.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • Year 2000 Compliant Borrower shall perform all acts reasonably necessary to ensure that (a) Borrower and any business in which Borrower holds a substantial interest, and (b) all customers, suppliers and vendors whose compliance is likely to be material to Borrower's business, become Year 2000 Compliant in a timely manner. Such acts shall include, without limitation, performing a comprehensive review and assessment of all Borrower's systems and adopting a detailed plan, with itemized budget, for the remediation, monitoring and testing of such systems. As used in this paragraph, "Year 2000 Compliant" shall mean, in regard to any entity, that all software, hardware, firmware, equipment, goods or systems utilized by or material to the business operations or financial condition of such entity, will properly perform date sensitive functions before, during and after the year 2000. Borrower shall, immediately upon request, provide to Agent such certifications or other evidence of Borrower's compliance with the terms of this paragraph as Bank may from time to time require.

  • Training Materials Training Materials will be provided for each student. Training Materials may be used only for either (i) the individual student’s reference during Boeing provided training and for review thereafter or (ii) Customer’s provision of training to individuals directly employed by the Customer.

  • Reverse Engineering The Customer must not reverse assemble or reverse compile or directly or indirectly allow or cause a third party to reverse assemble or reverse compile the whole or any part of the software or any products supplied as a part of the Licensed System.

  • Forecasting Requirements 19.5.1 The Parties shall exchange technical descriptions and forecasts of their Interconnection and traffic requirements in sufficient detail necessary to establish the Interconnections necessary for traffic completion to and from all Customers in their respective designated service areas.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!