Openings and Penetrations. All major openings and penetrations.
Openings and Penetrations. All major openings and penetrations that would be included on a quarter inch (1/4”= 1’-0”) scaled drawing.
Openings and Penetrations Sample Clauses
Related to Openings and Penetrations
Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.
Unsafe Working Conditions Employees shall be recognized by the Employer to have the competence to determine what constitutes unsafe working conditions within their discipline. No employee shall be disciplined for refusal to work in a situation which is deemed unsafe beyond the reasonable requirements of the employee's job.
Contract Database Metadata Elements Title: Great Neck Union Free School District and Great Neck Paraprofessionals Association (2011) Employer Name: Great Neck Union Free School District Union: Great Neck Paraprofessionals Association Local: Effective Date: 07/01/2011 Expiration Date: 06/30/2015 PERB ID Number: 5132 Unit Size: Number of Pages: 28 For additional research information and assistance, please visit the Research page of the Catherwood website - xxxx://xxx.xxx.xxxxxxx.xxx/library/research/ For additional information on the ILR School - xxxx://xxx.xxx.xxxxxxx.xxx/ ARTICLE# TITLE PAGE# Preamble 2 Article 1 Association Rights 2 Article 2 Board-Administration-Association Relationship and Procedures 4 Article 3 Exchange of Proposals 6 Article 4 Professionals Duties and Responsibilities of Paraprofessionals 7 Article 5 Work Assignments 8 Article 6 Annual Appointment 10 Article 7 Selection and Promotion 10 Article 8 Evaluations and Standards 11 Article 9 Procedures for Termination of Employment 11 Article 10 Conferences 12 Article 11 Human Resource File 12 Article 12 Professional Growth 13 Article 13 Sick Leave 14 Article 14 Personal Leave 16 Article 15 Other Leaves 17 Article 16 Grievance Procedures 18 Article 17 Legal Assistance 19 Article 18 Conformity to Law 19 Article 19 Health Insurance 20 Article 20 Retirement Plan 20 Article 21 Salary Schedule 21 Article 22 Seniority Policy 23 Article 23 Compensation for Financial Loss 24 Article 24 Duration of Agreement 25 Appendix A Determination of Negotiating Unit 25 Appendix B Payroll Deduction Authorization 26 Appendix C Bus Aides 26 Appendix D Salary Schedules 27
Unsafe Work Conditions No Employee shall be disciplined for refusal to work on a job which in the opinion of: (a) A member of a safety committee; or (b) A person designated by a safety committee; or (c) A safety officer after an on-site inspection and following discussion with a representative of the Employer, does not meet the standards established pursuant to the Workers' Compensation Act.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
Animals and Pets 3.11.1 Not keep any animals, birds, reptiles or pets of any description in the Property without the prior written consent of the Landlord such consent not to be unreasonably withheld but can be withdrawn upon reasonable notice.
Vaccinations Contractor understands, acknowledges, and agrees that, pursuant to Article II of the General Appropriations Act, none of the General Revenue Funds appropriated to the Department of State Health Services (DSHS) may be used for the purpose of promoting or advertising COVID-19 vaccinations in the 2024-25 biennium. It is also the intent of the legislature that to the extent allowed by federal law, any federal funds allocated to DSHS shall be expended for activities other than promoting or advertising COVID-19 vaccinations. Contractor represents and warrants that it is not ineligible, nor will it be ineligible during the term of this Contract, to receive appropriated funding pursuant to Article II.
Conditions of Use CLIENT acknowledges that its use of the Site is subject to and conditioned upon the following terms and agrees that TAILGATE GUYS may exercise any of the remedies set forth herein for CLIENTS failure to comply: a. CLIENT shall comply with all rules and regulations established by TAILGATE GUYS, University of Michigan, and any other applicable authority, including but not limited to parking regulations in effect on campus. A copy of current rules and regulations is attached hereto as Exhibit A, which shall be subject to adjustment at any time by TAILGATE GUYS, University of Michigan or other applicable authorities. b. CLIENT shall be permitted to access the Site at the respective times set forth in the rules or otherwise determined by TAILGATE GUYS and University of Michigan. c. CLIENT acknowledges all risks related to its attendance and use of the site, including risk of damage to or loss of property or risk of serious personal injury or death, and accepts sole responsibility for such risks. CLIENT shall secure all personal property in and around the Site and shall take all precautions necessary to prevent theft or destruction thereof. CLIENT expressly acknowledges and agrees that TAILGATE GUYS shall not be responsible for any personal property of or injury to CLIENT at any time. TAILGATE GUYS will not remove or hold for safe-keeping any personal items left on the Site after event closing and same will be subject to removal by University of Michigan facilities. CLIENT may be subject to costs and fees associated with such removal. d. Eligibility for any TAILGATE GUYS drop off service is determined by Tailgate Guys in its sole discretion and is based on University restrictions, staffing availability and other factors. If CLIENT is eligible to participate in any TAILGATE GUYS drop off service, the CLIENT is responsible for properly packaging all items that will be transported and otherwise agrees to comply with procedures established by TAILGATE GUYS for this “drop off service,” including but not limited to any limitations with regard to the amount and size of items to be transported. TAILGATE GUYS will not be responsible for any damaged or broken items during unloading or loading and transportation to or from the Site. e. CLIENT shall respect the interests of other fans and clients of TAILGATE GUYS and shall not engage in or permit disorderly or offensive conduct in or around the Site. CLIENT further agrees not to exceed the maximum number of guests allowed within the as set forth in the Exhibit A. Should CLIENT violate these provisions, TAILGATE GUYS management will give CLIENT a verbal warning. If CLIENT fails to promptly come into compliance, TAILGATE GUYS may immediately revoke CLIENT’s rights to the Site and in its sole and absolute discretion terminate this Agreement. Upon such revocation or termination, all amounts paid to TAILGATE GUYS with be forfeited by CLIENT and retained by TAILGATE GUYS. f. CLIENT shall not move, alter, or disrupt operation of any media equipment provided by TAILGATE GUYS. In the event of inclement weather, TAILGATE GUYS reserves the exclusive right to cover and protect all equipment associated with the Media Package with such materials and coverings as it deems appropriate, which may include gator covers or hard cases for TV’s, plastic bags for receivers and generators or the like (collectively, the "Protective Equipment"). CLIENT shall not remove any Protective Equipment or items contained inside Protective Equipment, and expressly acknowledges and agrees that only TAILGATE GUYS staff shall have authority to do so. CLIENT acknowledges and agrees that its right to use the media equipment may be suspended, without refund, at TAILGATE GUYS option, for violation of these provisions, and CLIENT further assumes all responsibility for any damages to media equipment resulting from violation of these provisions and shall reimburse TAILGATE GUYS for the cost to repair or replace damaged equipment. g. CLIENT shall keep the Site in a neat and orderly manner at all times and may incur fees set forth on Exhibit A, attached hereto and made a part hereof. h. CLIENT acknowledges and agrees that the signage identifying each Site is uniform and provided by TAILGATE GUYS, who reserves the right to omit any vulgar, offensive or discriminatory content requested by CLIENT, in the sole and absolute discretion of TAILGATE GUYS. i. TAILGATE GUYS reserves the right to immediately terminate CLIENT’s use of the Site for violation of the conditions of use. In addition, CLIENT shall be responsible for payment of all damages incurred by TAILGATE GUYS as a result of CLIENT’s failure to comply with the foregoing conditions of use or as a result of damages by CLIENT of any equipment of TAILGATE GUYS. To insure compliance and payment of damages or fines, CLIENT agrees to keep a credit card on file with TAILGATE GUYS, and hereby authorizes TAILGATE to charge said credit card amounts owing as a result of its breach; provided that TAILGATE GUYS delivers to CLIENT an itemization of said charges and receipt for payment thereof.
Access to Work Locations Reasonable access to employee work locations shall be granted officers of the Association and their officially designated representatives for the purpose of processing grievances or contacting members of the Association concerning business within the scope of representation. Such officers or representatives shall not enter any work location without the consent of the City Manager. Access shall be restricted so as not to interfere with the normal operations of the department or with established safety or security requirements. Solicitation of membership and activities concerned with the internal management of the Association, such as collecting dues, holding membership meetings, campaigning for office, conducting elections and distributing literature, shall not be conducted during working hours.
Subsurface Conditions Unless the Contract Documents stipulate specific quantities and units of rock or unsuitable soils, the Contractor shall assume material below the surface of the Earth to be earth and other material that can be removed by power shovel or similar equipment. Should conditions encountered below the surface of the ground be at variance to the number of unit requirements as indicated by drawings or specifications, and absent an agreed-upon unit price established prior to the bid by Addendum, or after contract execution by Change Order, the Contract Sum and/or time shall be adjusted as provided in the Contract Documents for changes in the work.
