ORIGIN OF THE GOODS Sample Clauses

ORIGIN OF THE GOODS. Regarding Goods and/or Services sourced from the Reinsurer´s country, the parties confirm that said Goods/Services are expected to originate from the Reinsurer´s country. If the Insurer – in any specific trasaction – has reason to doubt that this is the case, the Insurer will – as far as possible – investigate the origin, and the Insurer will immediately inform the Reinsurer of this suspicion and the result of his findings.
Sample 1Sample 2
ORIGIN OF THE GOODS. All Materials, Tools and/or Parts delivered under this Contract shall be genuine and from the O.E.M. (Original Material Manufacturer).
Sample 1Sample 2
ORIGIN OF THE GOODS. The Supplier makes no representation and gives no warranty in respect of the source or origin of manufacture of the goods or part thereof.
Sample 1
ORIGIN OF THE GOODS. The determination of the origin of the goods will be governed by what is established in the norms of the Andean legal system.
Sample 1
ORIGIN OF THE GOODS. The Supplier shall furnish on his commercial documents the non-preferential origin of all products (country of origin). Upon request by the Customer, the Supplier shall provide a certificate of origin for the goods delivered. The goods shall comply with all conditions of origin of the relevant bi- or multilateral preferential agreements, or any unilateral conditions of origin of the Generalized System of Preferences, provided the goods are regarded as being covered under those trading regulations.
Sample 1
ORIGIN OF THE GOODS. The goods supplied must conformto the conditions of origin specified in the preferential agreements of the EEC, unless the order confirmation expressly states otherwise.
Sample 1

Related to ORIGIN OF THE GOODS

  • The Goods C12.1 If requested by the Authority, the Contractor shall either provide the Authority with samples of Goods or performance demonstrations of Goods for evaluation and approval at the Contractor’s cost and expense. C12.2 The Contractor shall ensure that the Goods are fully compatible with any Equipment, to the extent specified in the Specification. C12.3 The Contractor acknowledges that the Authority relies on the skill and judgment of the Contractor in the supply of the Goods and the performance of its obligations under the Contract. C12.4 The Contractor shall supply and, where relevant, install the Goods in accordance with the Specification and the Tender and with all applicable provisions of the Contract.

  • Trade in Goods The Parties shall accord to one another most-favoured- nation treatment in all areas in respect of: — customs duties and charges applied to imports and exports, including the method of collecting such duties and charges, — provisions relating to customs clearance, transit, warehouses and transhipment, — taxes and other internal charges of any kind applied directly or indirectly to imported goods, — methods of payment and the transfer of such payments, — the rules relating to the sale, purchase, transport, distribution and use of goods on the domestic market.

  • Emergency Standby for Goods and/or Services If any Federal or State official, having authority to do so, declares an emergency or the occurrence of a natural disaster within the State of Connecticut, DAS and the Client Agency may request the Goods and Services on an expedited and prioritized basis. Upon receipt of such a request the Contractor shall make all necessary and appropriate commercially reasonable efforts to reallocate its staffing and other resources in order to give primary preference to Performing this Contract ahead of or prior to fulfilling, in whole or in part, any other contractual obligations that the Contractor may have. The Contractor is not obligated to make those efforts to Perform on an expedited and prioritized basis in accordance with this paragraph if doing so will make the Contractor materially breach any other contractual obligations that the Contractor may have. Contractor shall acknowledge receipt of any request made pursuant to this paragraph within 2 hours from the time that the Contractor receives it via purchase order or through a request to make an expedited or prioritized purchase through the State of Connecticut Purchasing Card (MasterCard) Program (the “P-Card Program”). If the Contractor fails to acknowledge receipt within 2 hours, confirm its obligation to Perform or actually Perform, as set forth in the purchase order or through the P-Card Program, then DAS and the Client Agency may procure the Performance from another source without further notice to Contractor and without creating any right of recourse at law or in equity against DAS or Client Agency.

  • Originating Goods For the purposes of this Agreement, a good shall be treated as an originating good if it is: (a) wholly obtained or produced in a Party as provided in Article 3.3 (Goods Wholly Obtained or Produced); (b) produced in a Party exclusively from originating materials from one or more of the Parties; or (c) produced in a Party using non-originating materials, provided the good satisfies the applicable requirements set out in Annex 3A (Product-Specific Rules), and meets all other applicable requirements of this Chapter.

  • Inspection of Goods 8.1 The Buyer shall inspect the goods upon delivery. 8.2 Where goods are damaged the Buyer shall notify the Supplier. The Buyer may reject the damaged goods and the following provisions shall apply: 8.2.1 the Supplier shall collect the damaged goods from the Buyer at the Supplier’s expense; 8.2.2 during the period between delivery of the goods to the Buyer and collection by the Supplier, the Buyer shall not be liable for any loss or further damage caused to the damaged goods; 8.2.3 all sums payable by the Buyer in relation to the damaged goods shall cease to become payable; 8.2.4 all sums paid by the Buyer in relation to the damaged goods shall be repaid by the Supplier immediately; 8.2.5 the Buyer shall be entitled to claim damages from the Supplier for any losses caused to the Buyer as a result of the goods being damaged. 8.3 Where there are shortages in the order the Buyer shall notify the Supplier and the following provisions shall apply: 8.3.1 all sums payable by the Buyer in relation to the missing goods shall cease to become payable; 8.3.2 all sums paid by the Buyer in relation to the missing goods shall be repaid by the Supplier immediately; 8.3.3 the Buyer shall be entitled to claim damages from the Supplier for any losses caused to the Buyer as a result of the shortages. 8.4 If the Buyer so requests, the Supplier shall immediately replace damaged goods or supply goods which are missing at the Supplier’s expense or the Buyer shall be entitled to cancel, without notice, the whole or any unexecuted part of the order and the rights referred to in Clause 5.2 shall apply. 8.5 Where there is an excess of goods in relation to the order the Buyer may reject the excess goods by notice in writing to the Supplier and the following provisions shall apply: 8.5.1 the Supplier shall collect the excess goods from the Buyer at the Supplier’s expense; 8.5.2 during the period between delivery of the goods and collection by the Supplier, the Buyer shall not be liable for any loss or damage caused to the excess goods; 8.5.3 no sum shall be due to the Supplier for the excess goods and in the event that sums are paid to the Supplier for the excess goods, the Supplier shall repay such sums to the Buyer immediately. 8.6 The Buyer may accept excess goods by notifying the Supplier of such acceptance and the price of the excess goods shall be payable by the Buyer. 8.7 The Supplier shall repair or replace free of charge, goods damaged or lost in transit upon receiving notice to that effect from the Buyer. 8.8 The Buyer’s signature on any delivery note of the Supplier is evidence of the number of packages received only and not evidence of the correct quantity of goods received or that the goods are in a good condition or of the correct quality.

  • Instructional Materials The Board recognizes that appropriate texts, library reference facilities, maps and globes, laboratory equipment, audio-visual equipment, art supplies, athletic equipment, current periodicals, standard tests, duplicating supplies, questionnaires, and similar materials are the tools of the teaching profession. The administration and the teachers will confer from time to time for the purpose of improving the selection and use of such educational tools, and the Board undertakes promptly to consider all joint decisions thereon made by its representative and the Association.

  • Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant- assisted project in accordance with Section 287.057, Florida Statutes.

  • Goods For purposes of the Contract, all things which are movable at the time that the Contract is effective and which include, without limiting this definition, supplies, materials and equipment, as specified in the Invitation to Bid and set forth in Exhibit A.

  • COUNTERFEIT GOODS Seller agrees that it will not furnish to Jeppesen Goods or separately-identifiable items or components of Goods that: (i) are an unauthorized copy or substitute of an “Original Equipment Manufacturer” or “Original Component Manufacturer” (collectively, “OEM”) item; (ii) are not traceable to an OEM sufficient to ensure authenticity in OEM design and manufacture; (iii) do not contain proper external or internal materials or components required by the OEM or are not constructed in accordance with OEM design; (iv) have been re- worked, re-marked, re-labeled, repaired, refurbished, or otherwise modified from OEM design but not disclosed as such or are represented as OEM authentic or new; or (v) have not passed successfully all OEM required testing, verification, screening, and quality control processes, (collectively “Counterfeit Goods”). Notwithstanding the foregoing, Goods or items that contain modifications, repairs, re-work, or re-marking as a result of Seller’s or its subcontractor’s design authority, material review procedures, quality control processes or parts management plans, and that have not been misrepresented or mismarked without legal right to do so, will not be deemed Counterfeit Goods. Counterfeit Goods will be deemed nonconforming for this PO under which they were delivered. Seller will implement and/or maintain an appropriate strategy to ensure that Goods furnished to Jeppesen under this PO are not Counterfeit Goods. Seller’s strategy will include, but is not limited to, the direct procurement of items from OEMs or authorized suppliers, conducting approved testing or inspection to ensure the authenticity of items, and, when items are to be procured from non-authorized suppliers, obtaining from such non-authorized suppliers appropriate certificates of conformance that provide one or more of the following: (i) the OEM’s original certificate of conformance for the item; (ii) sufficient records providing unbroken supply chain traceability to the OEM; or (iii) test and inspection records demonstrating the item’s authenticity. If Seller becomes aware or suspects that it has furnished Counterfeit Goods to Jeppesen under this PO, Seller promptly, but in no case later than thirty (30) days from discovery, will notify Jeppesen in writing and replace, at Seller’s expense, such Counterfeit Goods with OEM or Jeppesen- approved Goods that conform to the requirements of this PO. Seller will be liable for all costs related to the replacement of Counterfeit Goods, installation of authentic Goods, and any testing or validation necessitated by the installation of authentic Goods after the Counterfeit Goods have been replaced. Seller bears responsibility for procuring authentic Goods or items from its subcontractors and will ensure that all such subcontractors comply with the requirements of this Section.

  • REJECTION OF GOODS Notwithstanding any other rights of, or remedies available to UNDP under the Contract, in case any of the Goods are defective or otherwise do not conform to the specifications or other requirements of the Contract, UNDP, at its sole option, may reject or refuse to accept the Goods, and within thirty (30) days following receipt of notice from UNDP of such rejection or refusal to accept the Goods, the Contractor shall, in sole option of UNDP: 11.7.1 provide a full refund upon return of the Goods, or a partial refund upon a return of a portion of the Goods, by UNDP; or, 11.7.2 repair the Goods in a manner that would enable the Goods to conform to the specifications or other requirements of the Contract; or, 11.7.3 replace the Goods with Goods of equal or better quality; and, 11.7.4 pay all costs relating to the repair or return of the defective Goods as well as the costs relating to the storage of any such defective Goods and for the delivery of any replacement Goods to UNDP.