Other matters for planning agreements. Bushland
Other matters for planning agreements Sample Clauses
Related to Other matters for planning agreements
Attachment C, Standard State Provisions for Contracts and Grants Attachment C is hereby deleted in its entirety and replaced by the Attachment C December 15, 2017 attached to this Amendment. Child Support (Applicable to natural persons only; not applicable to corporations, partnerships or LLCs). Contractor is under no obligation to pay child support or is in good standing with respect to or in full compliance with a plan to pay any and all child support payable under a support order as of the date of this amendment.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Matters Applicable to All Requests for Compensation (a) Any Agent or any Lender claiming compensation under this Article III shall deliver a certificate to the Borrower setting forth the additional amount or amounts to be paid to it hereunder which shall be conclusive in the absence of manifest error. In determining such amount, such Agent or such Lender may use any reasonable averaging and attribution methods. (b) With respect to any Lender’s claim for compensation under Sections 3.01, 3.02, 3.03 or 3.04, the Borrower shall not be required to compensate such Lender for any amount incurred more than one hundred and eighty (180) days prior to the date that such Lender notifies the Borrower of the event that gives rise to such claim; provided that if the circumstance giving rise to such claim is retroactive, then such 180-day period referred to above shall be extended to include the period of retroactive effect thereof. If any Lender requests compensation by the Borrower under Section 3.04, the Borrower may, by notice to such Lender (with a copy to the Administrative Agent), suspend the obligation of such Lender to make or continue from one Interest Period to another applicable Eurocurrency Rate Loan, or, if applicable, to convert Base Rate Loans into Eurocurrency Rate Loans, until the event or condition giving rise to such request ceases to be in effect (in which case the provisions of Section 3.06(c) shall be applicable); provided that such suspension shall not affect the right of such Lender to receive the compensation so requested. (c) If the obligation of any Lender to make or continue any Eurocurrency Rate Loan, or to convert Base Rate Loans into Eurocurrency Rate Loans shall be suspended pursuant to Section 3.06(b) hereof, such Lender’s applicable Eurocurrency Rate Loans shall be automatically converted into Base Rate Loans (or, if such conversion is not possible, repaid) on the last day(s) of the then current Interest Period(s) for such Eurocurrency Rate Loans (or, in the case of an immediate conversion required by Section 3.02, on such earlier date as required by Law) and, unless and until such Lender gives notice as provided below that the circumstances specified in Sections 3.02, 3.03 or 3.04 hereof that gave rise to such conversion no longer exist: (i) to the extent that such Lender’s Eurocurrency Rate Loans have been so converted, all payments and prepayments of principal that would otherwise be applied to such Lender’s applicable Eurocurrency Rate Loans shall be applied instead to its Base Rate Loans; and (ii) all Loans that would otherwise be made or continued from one Interest Period to another by such Lender as Eurocurrency Rate Loans shall be made or continued instead as Base Rate Loans (if possible), and all Base Rate Loans of such Lender that would otherwise be converted into Eurocurrency Rate Loans shall remain as Base Rate Loans. (d) If any Lender gives notice to the Borrower (with a copy to the Administrative Agent) that the circumstances specified in Sections 3.02, 3.03 or 3.04 hereof that gave rise to the conversion of any of such Lender’s Eurocurrency Rate Loans pursuant to this Section 3.06 no longer exist (which such Lender agrees to do promptly upon such circumstances ceasing to exist) at a time when Eurocurrency Rate Loans made by other Lenders under the applicable Facility are outstanding, if applicable, such Lender’s Base Rate Loans shall be automatically converted, on the first day(s) of the next succeeding Interest Period(s) for such outstanding Eurocurrency Rate Loans, to the extent necessary so that, after giving effect thereto, all Loans held by the Lenders holding Eurocurrency Rate Loans under such Facility and by such Lender are held pro rata (as to principal amounts, interest rate basis, and Interest Periods) in accordance with their respective Commitments for the applicable Facility.
Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.
REQUESTS FOR FLEXIBLE WORKING ARRANGEMENTS 49.1 Employee may request change in working arrangements s.65 of the Act. Note 1: Section 65 of the Act provides for certain Employees to request a change in their working arrangements because of their circumstances, as set out in s.65(1A).
Indemnity for Personality Agreements Vendor agrees to indemnify and hold harmless and defend TIPS, TIPS Member(s), officers and employees, from and against all claims and suits for damages, injuries to persons (including death), property damages, losses, and expenses including court costs and attorney’s fees, arising out of, or resulting from, Vendor’s performance of this Agreement or sales made to TIPS Members under this agreement , including all such causes of action based upon common, constitutional, or statutory law, or based in whole or in part, upon allegations of negligent or intentional acts on the part of the Vendor, its officers, employees, agents, subcontractors, licensees, invitees, unless such claims are based in whole upon the negligent acts or omissions of the TIPS, TIPS Member(s), officers, employees, or agents. If based in part upon the negligent acts or omissions of the TIPS, TIPS Member(s), officers, employees, or agents, Vendor shall be responsible for their proportional share of theclaim.
Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.
Mechanisms for Cooperation Pursuant to Article 149 (Objectives), the Parties hereby establish a Committee on Cooperation comprising representatives of each Party.
Certification Regarding Entire TIPS Agreement for Part 1 and Part 2 Contracts 5 This is a two part solicitation. Part 1 is solicited for TIPS sales that are not considered a "public work" construction (1) The TIPS solicitation document resulting in the Agreement; (2) Any addenda or clarifications issued in relation to the corresponding TIPS solicitation; (3) All solicitation information provided to Vendor by TIPS through the TIPS eBid System; (3) Vendor’s entire proposal response to the corresponding TIPS solicitation including all accepted required attachments, acknowledged notices and certifications, accepted negotiated terms, accepted pricing, accepted responses to questions, and accepted written clarifications of Vendor’s proposal, and; any properly included attachments to the TIPS Contract. Does Vendor agree? Yes, Vendor agrees TIPS Members often turn to TIPS Contracts for ease of use and to receive discounted pricing. Vendor must respond with a percentage from 0%-100%. The percentage discount that you input below will be applied to your Part 1 "Catalog Pricing", as defined in the solicitation, for all TIPS Sales made during the life of the contract. You cannot alter this percentage discount once the solicitation legally closes. You will always be required to discount every TIPS Sale by the percentage included below with the exception of limited goods/services specifically identified and excluded from this discount in Vendor’s original proposal. If you add goods or services to your "Catalog Pricing" during the life of the contract, you will be required to sell those new items with this discount applied.
