OTHER OPERATING CONDITIONS Sample Clauses

Open Split View

Download

Share

Cite

OTHER OPERATING CONDITIONS. You will notify me of any changes in the operating conditions applicable to any Account.

Sample 1

Save

Copy

Related to OTHER OPERATING CONDITIONS

• GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

• WORKING CONDITIONS 9.01 Lunch periods shall be at mid-shift. 9.02 The Employer shall allow each employee two (2) breaks of ten (10) minutes each, but not more in a work shift. Time of breaks shall be mutually agreed upon. 9.03 Essential protective clothing including welder’s gloves, protective vests or leather jackets, noise abatement devices, and rainwear shall be supplied at no charge to the employee. In the event that an employee does not return the foregoing items supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any money owing to the employee. 9.04 Chemical or flush toilets shall be provided from the commencement of work on all jobs. Where the sewer or chemical toilets are not available, sanitary toilet facilities shall be provided as called for in local sanitary regulations. Toilet houses shall be painted, at least on the inside, and cleaned out daily. Toilet paper will be provided. 9.05 Where there is no running tap water available, drinking water in approved sanitary containers shall be provided. Paper cups will be supplied. Salt tablets shall be supplied during the summer months. 9.06 If requested by the Union or employee, the Employer will provide within three (3) calendar days, a termination slip which shall state the reason for the employee’s termination and whether or not he is eligible for rehire. 9.07 Adequate time will be allowed prior to quitting time for picking up tools. 9.08 A lock-up shall be provided for employees for drying clothes, and dressing room, as well as lunch room. The lock-up shall have tables, and benches with provision for drying clothes. Such lock-up shall have windows and venting with adequate lighting and provision for continuous heat twenty-four (24) hours a day. The Employer shall be responsible for having the lock-up cleaned out daily and kept cleared of building material and other construction paraphernalia. Additional shelters shall be provided for employees to eat their lunch as may be required. 9.09 In case of fire or burglary on property or premises provided by the Employer, the Employer shall protect the value of an employee’s work clothes up to a total of three hundred and fifty dollars ($350.00). The Employer shall also provide fire and burglary insurance for the employees required tools to a total value of the tools, tool for tool, make for make, provided an inventory of tools and clothing is filed with the Employer. The Employer shall supply the required forms and obtain the inventory from each employee. The employee shall receive a signed copy of the inventory from the Employer. Coverage will commence at the date of the filing of the inventory with the Employer. Where an employee fails to file an inventory his rights to submit a claim shall be waived. (a) All mechanics, welders, servicemen, tire servicemen, drill doctors, steel sharpeners, bodymen painters, and mechanics and welder apprentices who request coveralls shall have these supplied and cleaned by the Employer. There shall be one change a week available in the employee’s proper size. Employees are expected to take reasonable care of coveralls supplied. In the event that an employee does not return the coveralls supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any monies owing to the employee. When requested, coveralls shall be supplied on a temporary basis to employees who assist on work as described above, or where the Employer and the Union mutually agree that coveralls are required. (b) Employees entitled to receive coveralls as provided herein may obtain an additional change of coveralls in any one week providing the condition of the coveralls requires a change. The shop xxxxxxx shall use discretion in authorizing the additional change. (c) All shops shall provide adequate clean-up facilities. 9.11 The Employer shall pay the cost of obtaining operators’ licences other than those required under the Motor Vehicles Act for employees covered by this Agreement. 9.12 No employee will be permitted to use his own motor vehicle in a manner which is unfair to other members or against the best interest of the Union. 9.13 Each employee being terminated will be given one (1) hour’s notice of termination by the Employer or one (1) hour’s pay allowed in lieu thereof. Heavy duty mechanics and apprentice mechanics may utilize this hour to gather together their tools and put them in shape for their next job. 9.14 When a mechanic leaves the employ of the Employer, the Employer shall be required to pay cost of shipping mechanic’s tools. Tools shall be shipped within forty-eight (48) hours of his leaving his employment, subject to the same conditions as govern transportation. When an Operating Engineer elects to transport his own tools to and from the jobsite, the employee shall be paid the rate of two dollars and seventy-five cents ($2.75) per one hundred (100) pounds per one hundred (100) miles. (e.g. $2.75 x 528 pounds x 273 miles = $39.64). Where the Employer fails to comply with the above, the employee shall be deemed to be still on the payroll of the Employer and shall receive his usual wages and all other conditions of this Agreement until there is compliance with these provisions. 9.15 Where an employee is involved in an accident while on the job and as a result is unable to perform his work, he shall receive a full day’s pay for the day of the accident.

• Existing Conditions Tenant accepts the Property in its condition as of the execution of the Lease, subject to all recorded matters, laws, ordinances, and governmental regulations and orders. Except as provided herein, Tenant acknowledges that neither Landlord nor any agent of Landlord has made any representation as to the condition of the Property or the suitability of the Property for Tenant's intended use. Tenant represents and warrants that Tenant has made its own inspection of and inquiry regarding the condition of the Property and is not relying on any representations of Landlord or any Broker with respect thereto. If Landlord or Landlord's Broker has provided a Property Information Sheet or other Disclosure Statement regarding the Property, a copy is attached as an exhibit to the Lease.

• Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.

• Unsafe Working Conditions Employees shall be recognized by the Employer to have the competence to determine what constitutes unsafe working conditions within their discipline. No employee shall be disciplined for refusal to work in a situation which is deemed unsafe beyond the reasonable requirements of the employee's job.

• Existing Condition Except as otherwise set forth in the SPAR Disclosure Letter, since the Interim SPAR Marketing Balance Sheet Date, no SPAR Marketing Company has: (a) incurred any liabilities, other than liabilities incurred in the ordinary course of business consistent with past practice (including, without limitation, advances under its commitments and lines of credit), the liabilities contemplated under the SPAR Premerger Agreements; (b) discharged or satisfied any lien or encumbrance or paid any liabilities, other than in the ordinary course of business consistent with past practice (including, without limitation, repayments under its commitments and lines of credit), or failed to pay or discharge when due any liabilities, other than in the ordinary course of business consistent with past practice, or where the obligation is being contested in good faith, and the failure to pay or discharge has not caused and would not be reasonably likely to cause any SPAR Material Adverse Effect; (c) sold, encumbered, assigned or transferred any assets, properties or rights or any interest therein, or made any agreement or commitment or granted any option or right with, of or to any person to acquire any assets, properties or rights of any SPAR Marketing Company or any interest therein, except for sales and dispositions in the ordinary course of business consistent with past practice, and except for the transactions contemplated under the SPAR Premerger Agreements and this Agreement; (d) created, incurred, assumed or guaranteed any indebtedness for money borrowed, or mortgaged, pledged or subjected any of its assets to any mortgage, lien, pledge, security interest, conditional sales contract or other encumbrance of any nature whatsoever, other than (i) in the ordinary course of business (including, without limitation, future advances and floating liens under existing, increased or replacement credit facilities), or (ii) in connection with the financing of the MCI Acquisition; (e) made or suffered any early cancellation or termination of any Material SPAR Document (other than in the ordinary course of business with a vendor to a SPAR Marketing Company); or amended, modified or waived any substantial debts or claims held by it under any Material SPAR Document other than in the ordinary course of business; (f) declared, set aside or paid any dividend or made or agreed to make any other distribution or payment in respect of its capital shares or redeemed, purchased or otherwise acquired or agreed to redeem, purchase or acquire any of shares of its capital stock or its other ownership interests; (g) suffered any damage, destruction or loss that has had or will have (i) a SPAR Material Adverse Effect, or (ii) a replacement cost individually or in the aggregate at more than $100,000; (h) suffered any repeated, recurring or prolonged shortage, cessation or interruption of supplies or utility or other services required to conduct its business and operations; (i) suffered any material adverse change in the business, operations, properties, assets or financial condition of the SPAR Marketing Companies taken as a whole; (j) received notice or had knowledge of any actual or overtly threatened organized or coordinated labor trouble, strike or other similar occurrence, event or condition of any similar character that has had or would be reasonably likely to have a SPAR Material Adverse Effect; (k) increased the salaries or other compensation of, or made any advance (excluding advances for ordinary and necessary business expenses) or loan to, any of its employees or made any increase in, or any addition to, other benefits to which any of its employees are entitled (in each case other than increases in salaries or other compensation in the ordinary course of business consistent with past practice and that in the aggregate have not resulted in a SPAR Material Adverse Effect); (l) changed any of the accounting principles followed by it or the methods of applying such principles, other than the contemplated change for certain of the SPAR Marketing Companies from "subchapter s" status to "subchapter c" status for federal income tax purposes (to be effected shortly before the Effective Time) and other changes in implementing the SPAR Premerger Transactions; (m) except as contemplated by the SPAR Premerger Agreements or this Agreement, entered into any transaction other than in the ordinary course of business consistent with past practice; (n) except as contemplated by the SPAR Premerger Agreements or this Agreement, changed its authorized capital or its securities outstanding or otherwise changed its ownership interests, or granted any options, warrants, calls, conversion rights or commitments with respect to any of its capital stock or other ownership interests; or (o) agreed to take any of the actions referred to above.

• Adverse Weather Conditions Except in emergency conditions, the Employer shall not require an employee to work outside under extreme weather conditions.

• Pre-Existing Conditions The Contractor acknowledges that it has been provided unrestricted access to the existing improvements and conditions on the Project site and that it has thoroughly investigated those conditions. Contractor’s investigation was instrumental in preparing its Proposal to perform the Work. Contractor shall not make or be entitled to any adjustment to the Contract Time or the Contract Sum arising from Project conditions that Contractor discovered or, in the exercise of reasonable care, should have discovered in Contractor’s investigation.

• TEACHING CONDITIONS The parties recognize that optimum school facilities for both student and teacher are desirable to insure the high quality of education that is the goal of both the Association and the Board. It is also acknowledged that the primary duty and responsibility of the teacher is to teach and that the organization of the school and school day should be directed toward ensuring that the energy of the teacher is primarily utilized to this end.

• Buyer’s Closing Conditions The obligation of Buyer to proceed with the Closing contemplated hereby is subject, at the option of Buyer, to the satisfaction on or prior to the Closing Date of all of the following conditions: