PARTIAL COMPLETION OF FLIGHTS Sample Clauses

PARTIAL COMPLETION OF FLIGHTS. If a flight does not reach its destination due to adverse weather or technical-, mechanical- or operational-interruption or Force Majeure, the Charterer agrees to pay charges for the completed portion of the trip. Hongkong Jet does not guarantee that an alternate aircraft will be available. Hongkong Jet will make every effort to locate a suitable alternative or return passengers to the point of departure, if required, as soon as is reasonably possible. However, we reserve the right to charge Charterer any resulting costs that Hongkong Jet may incur, in addition to the Charter Price as shown on the Quotation.
AutoNDA by SimpleDocs
PARTIAL COMPLETION OF FLIGHTS. In the event that flyExclusive is unable to complete the trip due to reasons beyond its reasonable control (“Force Majeure”) including but not limited to; mechanical issues, crew sickness, airline delays, airport or airspace restrictions, the Customer will be responsible only for the portion of the itinerary completed. In the event that weather causes a trip to be terminated prior to completion, the charges for the trip will be adjusted to reflect incurred expenses, actual flight hours and/or any minimum charges that might apply.
PARTIAL COMPLETION OF FLIGHTS. If a flight does not reach its destination due to weather, or mechanicals issues and landing is needed TPA is not liable for expenses incurred for replacement, and THE CLIENT must pay the costs that result in proportion to the completed flight. In case of mechanical issues or aircraft unavailability, TPA may provide another aircraft to complete the trip to the initially requested destination, which will be charged at additional cost to THE CLIENT. RESPONSIBILITY TPA shall not be liable for flight rearrangement, changes, cancellations, sickness, weather, strikes, war, quarantine, or any similar cause. THE CLIENT shall be responsible for any loss, expense, indirect, special or consequential damages caused to the aircraft. By accepting these terms and conditions, THE CLIENT acknowledges and accepts to pay the cost that results from the repair of the damages that THE CLIENT causes. OPERATIONAL Aircraft owned by TPA is operated under AOC number TPM/2010 Aircraft contracted to third parties are operated under their respective insurance, permits and certificates, in which case THE CLIENT shall hold harmless and shall indemnify Charter Company against any and all losses.
PARTIAL COMPLETION OF FLIGHTS. In the event that Exclusive Jets, LLC is unable to complete the trip due to reasons beyond its reasonable control (“Force Majeure”) including but not limited to; mechanical issues, crew sickness, airline delays, airport or airspace restrictions, the Customer will be responsible only for the portion of the itinerary completed. In the event that weather causes a trip to be terminated prior to completion, the charges for the trip will be adjusted to reflect incurred expenses, actual flight hours and/or any minimum charges that might apply.
PARTIAL COMPLETION OF FLIGHTS. Prime Jet is not liable for expenses incurred for replacement transportation in the case of mechanicals. If a flight does not reach its destination due to weather or aircraft malfunction, charges apply to any destination reached and return flight of the aircraft and crew (with or without passengers) to a reasonable maintenance base. In the case of mechanicals, Prime Jet may at its option provide substitute transportation which may be charged as an additional fee to charterer and at the approval of the charterer only.

Related to PARTIAL COMPLETION OF FLIGHTS

  • At Substantial Completion and Final Completion the Contractor shall provide a certification letter certifying that the Work does not contain asbestos as required by the UTUGCs.

  • Substantial Completion “Substantial Completion” means the stage in the progress of the Work when the Work, or designated portions thereof, may still require minor modifications or adjustments but, in the Owner’s opinion, the Work has progressed to the point such that all parts of the Work under consideration are fully operational and usable for intended purposes, as evidenced by a Certificate of Substantial Completion approved by the Owner. If a Certificate of Occupancy is required by public authorities having jurisdiction over the Work, said certificate shall be issued before the Work or any portion thereof is considered substantially complete. When the Contractor considers that the Work, or a portion thereof which the Owner agrees to accept separately, is substantially complete, the Contractor shall notify Owner’s Designated Representative (sometimes referred to as the “ODR”) and request a determination as to whether the Work or designated portion thereof is substantially complete. If the ODR does not consider the Work substantially complete, the ODR will notify the Contractor giving reasons therefore. Failure on the Owner’s part to list a reason does not alter the responsibility of the Contractor to complete all Work in accordance with the terms of this Agreement. After satisfactorily completing items identified by Owner’s Designated Representative, the Contractor shall then submit another request for the ODR to determine Substantial Completion. If The ODR considers the Work substantially complete, The ODR will prepare and deliver a certificate of Substantial Completion which shall establish the date of Substantial Completion, shall include a punch list of items to be completed or corrected before final completion and final payment, shall establish the time within which the Contractor shall finish the punch list, and shall establish responsibilities of the Owner and the Contractor for security, maintenance, heat, utilities, damage to the Work, warranty and insurance. Failure to include an item on the punch list does not alter the responsibility of the Contractor to complete all Work in accordance with the terms and conditions of this Agreement. The certificate of Substantial Completion shall be signed by the Owner and the Contractor to evidence acceptance of the responsibilities assigned to them in such certificate. Substantial Completion (as defined in this agreement) for all stages of the Work shall be achieved on or before the following Substantial Completion date: DATE FOR SUBSTANTIAL COMPLETION: TBD Under no circumstances will the time for Substantial Completion exceed this date without a written amendment to this Agreement. THE TIMES SET FORTH IN THE CONSTRUCTION DOCUMENTS ARE AN ESSENTIAL ELEMENT OF THE AGREEMENT. TIME LIMITS STATED IN THE CONTRACT DOCUMENTS ARE OF THE ESSENCE OF THIS AGREEMENT.

  • Completion of Punch List items 14.4.1 All items in the Punch List shall be completed by the Concessionaire within 90 (ninety) days of the date of issue of the Provisional Certificate and for any delay thereafter, other than for reasons solely attributable to the Authority or due to Force Majeure, the Authority shall be entitled to recover Damages from the Concessionaire to be calculated and paid for each day of delay until all items are completed, at the lower of (a) 0.1% (zero point one per cent) of the Performance Security, and (b) 0.2% (zero point two per cent) of the cost of completing such items as estimated by the Independent Engineer. Subject to payment of such Damages, the Concessionaire shall be entitled to a further period not exceeding 120 (one hundred and twenty) days for completion of the Punch List items. For the avoidance of doubt, it is agreed that if completion of any item is delayed for reasons solely attributable to the Authority or due to Force Majeure, the completion date thereof shall be determined by the Independent Engineer in accordance with Good Industry Practice, and such completion date shall be deemed to be the date of issue of the Provisional Certificate for the purposes of Damages, if any, payable for such item under this Clause 14.4.1.

  • Upon Substantial Completion of the Work or designated portion thereof and upon application by the Contractor and certification by the Architect, the State shall make payment, reflecting adjustment in retainage, if any, for such Work or portion thereof, as provided in the Contract Documents.

  • COMMENCEMENT AND COMPLETION OF THE PROJECT Section 3.01 The Project

  • Commencement and Completion of Work Upon the Effective Date of the Contract, bidder agrees to commence all Preconstruction Activities. Upon issuance of a Proceed Order, bidder agrees to commence physical activities on the Site with adequate forces and equipment and to complete to Material Completion all work in 90 consecutive calendar days beginning the day after the date of the Proceed Order. Bid Bond. Enclosed herewith is a Bid Bond (NO OTHER FORM ACCEPTABLE) in the amount of Dollars ($ ) (being not less than five percent of the Bid). Bidder agrees that the above stated amount is the proper measure of liquidated damages that the Owner will sustain by bidder’s failure to execute the Contract or to furnish the Performance and Payment Bonds should bidder’s bid be accepted. Obligation of Bid Bond. If this bid is accepted within thirty-five days after the date set for the opening of bids and bidder fails to execute the Contract within ten days after Notice of Successful Bid, or if bidder fails to furnish both Performance and Payment Bonds, the obligation of the Bid Bond will remain in full force and effect and the money payable thereon shall be paid into the funds of the Owner as liquidated damages for such failure; otherwise, the obligations of the Bid Bond will be null and void. Bidder Certification Certification under Oath. Under oath I certify that I am a principal or other representative of the bidder, and that I am authorized by it to execute the foregoing bid on its behalf; and further, that I am a principal person of the bidder with management responsibility for the construction for the bidder, and as such I am personally knowledgeable of all its pertinent matters. I further certify that this bid is made without prior understanding, agreement, or connection with any corporation, firm, or person submitting a bid for the same services, materials, labor, supplies, or equipment and is in all respects fair and without collusion or fraud. Bidder and its principals understand that collusive bidding is a violation of state and federal law and can result in fines, prison sentences, and civil damage awards. Bidder agrees to abide by all conditions of this bid. BY: Authorized Signature (BLUE INK) Printed Name Title Sworn to and subscribed before me this Day of , 20 . Notary Public My commission expires:

  • Final Completion The full and final completion of all Work in accordance with the Contract Documents.

  • After Substantial Completion § 12.2.2.1 In addition to the Contractor’s obligations under Section 3.5, if, within one year after the date of Substantial Completion of the Work or designated portion thereof or after the date for commencement of warranties established under Section 9.9.1, or by terms of any applicable special warranty required by the Contract Documents, any of the Work is found to be not in accordance with the requirements of the Contract Documents, the Contractor shall correct it promptly after receipt of notice from the Owner to do so, unless the Owner has previously given the Contractor a written acceptance of such condition. The Owner shall give such notice promptly after discovery of the condition. During the one-year period for correction of Work, if the Owner fails to notify the Contractor and give the Contractor an opportunity to make the correction, the Owner waives the rights to require correction by the Contractor and to make a claim for breach of warranty. If the Contractor fails to correct nonconforming Work within a reasonable time during that period after receipt of notice from the Owner or Architect, the Owner may correct it in accordance with Section 2.5.

  • Substantial Completion Date Substantial Completion of the Work as defined in Article 6.1.2 of the General Conditions to the Continuing Contract for Construction Management shall be achieved by July 31, 2022.

  • Completion of Project The Borrower shall carry out the Project in accordance with the Technical Description as may be modified from time to time with the approval of the Bank, and complete it by the final date specified therein.

Time is Money Join Law Insider Premium to draft better contracts faster.