Paved Surface Sample Clauses

Paved Surface. Defects and omissions as referenced in Division 1, Section 4, Sub section 49.0 of the Department's Standard Specification shall include construction related defects, on the pavement related to top down ravelling, cracking, premature stripping and/or potholing. In the event that defect(s) are observed on the pavement surface, within the Extended Warranty period, the Engineer will determine whether the defects are material/construction related. The Contractor shall repair at their own expense, all construction related defects as identified by the Engineer. Defects shall be cold planed to a full lane width and to the same depth of the surface course. Emulsified asphalt tack shall be applied to all joints and the underlying asphalt concrete. Asphalt concrete removed by cold planing shall be replaced with the equivalent type of asphalt concrete material according to the Department's Standard Specification, Division 4 Section 4 ‐ Asphalt Concrete Hot Mixed ‐ Hot Placed. The hot mix asphalt shall be compacted to 92.5% of the Maximum Theoretical Density (per ASTM D 3202) using both a rubber tired roller to obtain maximum compaction and a steel drum roller to obtain smoothness. Combination rollers are acceptable. The perimeter of the repaired area shall be sealed with a rubberized joint sealing material as specified in Division 4 Section 11.
Sample 1
AutoNDA by SimpleDocs
Paved Surface. Defects and omissions as referenced in Division 1, Section 3, Sub section 39.0 of the Department's Standard Specification shall include construction related defects, on the pavement related to top down ravelling, cracking, premature stripping and/or potholing. In the event that defect(s) are observed on the pavement surface, within the Extended Warranty period, the Engineer will determine whether the defects are material/construction related. The Contractor shall repair at their own expense, all construction related defects as identified by the Engineer. Defects shall be cold planed to a full lane width and to the same depth of the surface course. Emulsified asphalt tack shall be applied to all joints and the underlying asphalt concrete. Asphalt concrete removed by cold planing shall be replaced with the equivalent type of asphalt concrete material according to the Department's Superpave Asphalt Concrete End Product Specification (EPS). The hot mix asphalt shall be compacted to 92.5% of the Maximum Theoretical Density (per ASTM D 3202) using both a rubber tired roller to obtain maximum compaction and a steel drum roller to obtain smoothness. Combination rollers are acceptable. The perimeter of the repaired area shall be sealed with a rubberized joint sealing material as specified in Division 4 Section 11.
Sample 1

Related to Paved Surface

  • Road Surfaces (1) Grade, shape, crown, and/or outslope surface and shoulders.

  • Surface  Grade and shape the road surface, turnouts, and shoulders to the original shape on the TYPICAL SECTION SHEET. Inslope or outslope as directed to provide a smooth, rut-free traveled surface and maintain surface water runoff in an even, unconcentrated manner.  Blading shall not undercut the backslope or cut into geotextile fabric on the road.  If required by the Contract Administrator, water shall be applied as necessary to control dust and retain fine surface rock.  Surface material shall not be bladed off the roadway. Replace surface material when lost or worn away, or as directed by the Contract Administrator.  Remove shoulder berms, created by grading, to facilitate drainage, except as marked or directed by the Contract Administrator.  For roads with geotextile fabric: spread surface aggregate to fill in soft spots and wheel ruts (barrel spread) to prevent damage to the geotextile fabric.

  • Common Areas Tenant shall have the non-exclusive right to use in common with other tenants in the Project, and subject to the Rules and Regulations referred to in Article 5 of this Lease, those portions of the Project which are provided, from time to time, for use in common by Landlord, Tenant and any other tenants of the Project (such areas, together with such other portions of the Project designated by Landlord, in its discretion, including certain areas designated for the exclusive use of certain tenants, or to be shared by Landlord and certain tenants, are collectively referred to herein as the “Common Areas”). The Common Areas shall consist of the “Project Common Areas” and the “Building Common Areas.” The term “Project Common Areas,” as used in this Lease, shall mean the portion of the Project designated as such by Landlord or areas within the Project that the occupants of the Building are permitted to utilize pursuant to a recorded declaration and which areas shall be maintained in accordance with the declaration. The term “Building Common Areas,” as used in this Lease, shall mean the portions of the Common Areas located within the Building reasonably designated as such by Landlord. The manner in which the Common Areas are maintained and operated shall be at the reasonable discretion of Landlord and the use thereof shall be subject to the Rules and Regulations as Landlord may make from time to time. Landlord reserves the right to close temporarily, make alterations or additions to, or change the location of elements of the Project and the Common Areas, provided that, in connection therewith, Landlord shall perform such closures, alterations, additions or changes in a commercially reasonable manner and, in connection therewith, shall use commercially reasonable efforts to minimize any material interference with Tenant’s use of and access to the Premises.

  • Excavation If any excavation shall be made upon land adjacent to or under the Building, or shall be authorized to be made, Tenant shall afford to the person causing or authorized to cause such excavation, license to enter the Premises for the purpose of performing such work as said person shall deem necessary or desirable to preserve and protect the Building from injury or damage and to support the same by proper foundations, without any claim for damages or liability against Landlord and without reducing or otherwise affecting Tenant’s obligations under this Lease.

  • Exterior Drainage Does water stand on the property for more than 24 hours after a heavy rain? Yes No Unknown Comments Are gutters and downspouts in good repair? Yes No Unknown Comments:

  • Alpine Areas The employer shall pay an Alpine disability allowance of $2.50 per hour worked on projects in alpine areas.

  • Common Area (Check one)

  • Groundwater The groundwater shall not be degraded as a result of the waste maintained at the facility.

  • Building With respect to each parcel of Real Estate, all of the buildings, structures and improvements now or hereafter located thereon. Business Day. Any day on which banking institutions located in the same city and State as the Agent’s Head Office are located are open for the transaction of banking business and, in the case of LIBOR Rate Loans, which also is a LIBOR Business Day.

  • Buildings The Employer will provide and maintain all state-owned buildings, facilities, and equipment in accordance with the specific written order(s) of the Michigan Departments of Licensing and Regulatory Affairs and/or Military and Veterans Affairs. Where facilities are leased by the Employer, the Employer shall make every reasonable effort to assure that such facilities comply with the order(s) of the Michigan Departments of Licensing and Regulatory Affairs and/or Military and Veterans Affairs.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!