Pedestal Assembly Sample Clauses

Pedestal Assembly. ▪ A 30” FFH assembly shall provide a 8000 lb. axial load without permanent deformation. ▪ Assembly shall provide a range of adjustment from Ito 2” total. ▪ Provide a means of leveling and locking the assembly at a selected height which requires deliberate action to change height setting and which prevents vibrating displacement. ▪ Pedestal bases Fabricated of a square base with not less than 16 square inches of bearing area and assembled to a stud or tube which is designed to engage the pedestal head assembly; secure to sub floor in accordance with manufacturer’s instructions. ▪ Pedestal heads. Fabricated of a head plate with a corresponding stud or tube which is designed to engage the pedestal base assembly. The head must be the proper type to positively locate the floor panel or to receive a xxxxxxxx system. When specified, the head shall provide a means to fasten the floor panel or xxxxxxxx directly to the head. ▪ Xxxxxxxx system. Xxxxxxxx system shall be all steel construction, designed and fabricated to interlock with pedestal head and to form a modular grid pattern with members under edges of all field floor panels. Xxxxxxxx to be bolted to the pedestal head. ▪ Corner lock fastener. Floor panels shall be provided with four corrosive resistant, captured fasteners, which remain with the panel when removed. Panels shall be removable by releasing the four fasteners and shall remain positively locked onto the pedestal head without the fasteners in place.
Sample 1
AutoNDA by SimpleDocs

Related to Pedestal Assembly

  • General Assembly In addition to the rules described in Section 6.2, the following rules apply:

  • Staging In addition to the staging categories listed in paragraph 1 of Annex 2-A, this Schedule contains staging categories 20-A, 20-B, PR-1 and PR-130:

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Equipment Cleaning (a) Areas, known by Forest Service prior to timber sale advertisement, that are infested with invasive species of concern are shown on Sale Area Map. A current list of invasive species of concern and a map showing the extent of known infestations is available at the Forest Supervisor’s Office. For purposes of this provision, “Off-Road Equipment” includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.

  • Assembly (1)(a) The Contracting Parties shall have an Assembly.

  • Appliances The Landlord shall: (check one) ☐ - Provide the following appliances: . ☐ - Not provide any appliances.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Installations 2.1. This test shall be conducted with either the complete REESS or with a related REESS subsystem(s) including the cells and their electrical connections. If the manufacturer chooses to test with related subsystem(s), the manufacturer shall demonstrate that the test result can reasonably represent the performance of the complete REESS with respect to its safety performance under the same conditions. If the electronic management unit for the REESS is not integrated in the casing enclosing the cells, then the electronic management unit may be omitted from installation on the Tested-Device if so requested by the manufacturer.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.