Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Dissemination of Research Findings and Acknowledgement of Controlled-Access Datasets Subject to the NIH GDS Policy
Distributions; Xxxxxx Xxx Guaranty On or before each Determination Date (or as soon thereafter as is reasonably practicable), Xxxxxx Mae shall calculate the Lower Tier Distribution Amount for the current calendar month. On each Distribution Date, Xxxxxx Xxx shall withdraw from the Certificate Account the portion of the Lower Tier Distribution Amount distributable thereon and shall make the distributions to the Holders of the related Lower Tier Regular Classes in the respective amounts and in the applicable manner determined pursuant to Section 2.02. In the event that the amount on deposit in the Certificate Account on any Distribution Date shall be less than the applicable portion of the Lower Tier Distribution Amount distributable thereon, Xxxxxx Mae shall provide from its own funds the amount of any such insufficiency. In addition, in the event that (i) the applicable portion of the Lower Tier Distribution Amount shall be insufficient to pay all interest due and payable on the related Lower Tier Regular Classes on such Distribution Date or (ii) such Distribution Date is a Final Distribution Date for any Class and the distribution on such Distribution Date of the applicable portion of the Lower Tier Distribution Amount will not be sufficient to reduce the Class Balance of such Class to zero on such Final Distribution Date, then Xxxxxx Xxx shall (a) withdraw from the Certificate Account, such amount as shall be necessary to remedy such insufficiency and (b) to the extent that funds in the Certificate Account shall be insufficient therefor, apply its own funds towards remedying the same.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
How to get a TIN If you do not have a TIN, apply for one immediately. To apply for an SSN, get Form SS-5, Application for a Social Security Card, from your local SSA office or get this form online at xxx.XXX.xxx. You may also get this form by calling 0-000-000-0000. Use Form W-7, Application for IRS Individual Taxpayer Identification Number, to apply for an ITIN, or Form SS-4, Application for Employer Identification Number, to apply for an EIN. You can apply for an EIN online by accessing the IRS website at xxx.xxx.xxx/Xxxxxxxxxx and clicking on Employer Identification Number (EIN) under Starting a Business. Go to xxx.xxx.xxx/Xxxxx to view, download, or print Form W-7 and/or Form SS-4. Or, you can go to xxx.xxx.xxx/XxxxxXxxxx to place an order and have Form W-7 and/or SS-4 mailed to you within 10 business days. If you are asked to complete Form W-9 but do not have a TIN, apply for a TIN and write “Applied For” in the space for the TIN, sign and date the form, and give it to the requester. For interest and dividend payments, and certain payments made with respect to readily tradable instruments, generally you will have 60 days to get a TIN and give it to the requester before you are subject to backup withholding on payments. The 60-day rule does not apply to other types of payments. You will be subject to backup withholding on all such payments until you provide your TIN to the requester.
Conhecimento da Lingua O Contratado, pelo presente instrumento, declara expressamente que tem pleno conhecimento da língua inglesa e que leu, compreendeu e livremente aceitou e concordou com os termos e condições estabelecidas no Plano e no Acordo de Atribuição (“Agreement” xx xxxxxx).
International Olympic Committee; International Red Cross and Red Crescent Movement As instructed from time to time by ICANN, the names (including their IDN variants, where applicable) relating to the International Olympic Committee, International Red Cross and Red Crescent Movement listed at xxxx://xxx.xxxxx.xxx/en/resources/registries/reserved shall be withheld from registration or allocated to Registry Operator at the second level within the TLD. Additional International Olympic Committee, International Red Cross and Red Crescent Movement names (including their IDN variants) may be added to the list upon ten (10) calendar days notice from ICANN to Registry Operator. Such names may not be activated in the DNS, and may not be released for registration to any person or entity other than Registry Operator. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Registry Operator may self-‐allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.
COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.
Unbundled Copper Loops (UCL) 2.4.1 BellSouth shall make available Unbundled Copper Loops (UCLs). The UCL is a copper twisted pair Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters) and is not intended to support any particular telecommunications service. The UCL will be offered in two types – Designed and Non-Designed.
How Much May I Contribute to a Xxxx XXX As a result of the Economic Growth and Tax Relief Reconciliation Act (“EGTRRA”) of 2001, the maximum dollar amount of annual contributions you may make to a Xxxx XXX is $5,500 for tax years beginning in 2013 with the potential for Cost-of-Living Adjustment (COLA) increases in $500 increments. However, these amounts are phased out or eliminated entirely if your adjusted gross income is over a certain level, as explained in more detail below. Year 2020 2021 Xxxx XXX Contribution Limit $6,000 $6,000 You may make annual contributions to a Xxxx XXX in any amount up to 100% of your compensation for the year or the maximum contribution limits shown in the table above, whichever is less. The limitation is reduced by any contributions made by you or on your behalf to any other individual retirement plan (such as a Traditional IRA) except SEP IRAs and SIMPLE IRAs. Your annual contribution limitation is not reduced by contributions you make to a Xxxxxxxxx Education Savings Account that covers someone other than yourself. In addition, qualifying rollover contributions and transfers are not subject to these limitations. If you are age 50 or older by the end of the year, you may make additional “catch-up” contributions to a Xxxx XXX. The “catch-up” contribution limit is $1,000 for tax years 2009 and beyond. If you are married and file a joint return, you may make contributions to your spouse’s Xxxx XXX. However, the maximum amount contributed to both your own and to your spouse’s Xxxx XXX may not exceed 100% of your combined compensation or the maximum contribution shown in the table above, whichever is less. The maximum amount that may be contributed to either your Xxxx XXX or your spouse’s Xxxx XXX is shown in the table above. Again, these dollar limits are reduced by any contributions made by or on behalf of you or your spouse to any other individual retirement plan (such as a Traditional IRA) except SEP IRAs and SIMPLE IRAs. Again, the limit is not reduced for contributions either of you make to a Xxxxxxxxx Education Savings Account for someone other than yourselves. As noted in Item 1, your eligibility to contribute to a Xxxx XXX depends on your AGI (as defined below). The amount that you may contribute to a Xxxx XXX is reduced proportionately for AGI which exceeds the applicable dollar amount. For the 2020 and 2021 tax years, the amount that you may contribute to your Xxxx XXX is as follows: Single Individual Year Eligible to Make a Contribution if AGI is Less Than: Eligible to Make a Partial Contribution if AGI is Between: Not Eligible to Make A Contribution if AGI is Over: 2020 $124,000 $124,000 - $139,000 $139,000 2021 & After - sub- ject to COLA increases $125,000 $125,000 - $140,000 $140,000 Married Individual Filing a Joint Income Tax Return Year Eligible to Make a Contribution if AGI is Less Than: Eligible to Make a Partial Contribution if AGI is Between: Not Eligible to Make A Contribution if AGI is Over: 2020 $196,000 $196,000 - $206,000 $206,000 2021 & After - sub- ject to COLA increases $198,000 $198,000 - $208,000 $208,000 If you are a married taxpayer filing separately, your contribution phases out over the first $10,000 of AGI, so that if your AGI is $10,000 or more you may not contribute to a Xxxx XXX for the year. Note that the amount you may contribute to a Xxxx XXX is not affected by your participation in an employer-sponsored retirement plan. To determine the amount you may contribute to a Xxxx XXX (assuming it does not exceed 100% of your compensation), you can refer to IRS Publication 590-A: Modified Adjusted Gross Income for Xxxx XXX Purposes and Determining Your Reduced Xxxx XXX Contribution Limit. The amount you contribute may not exceed the maximum contribution limits shown in the table above reduced by the amount contributed on your behalf to all other individual retirement accounts (except SEP IRAs and SIMPLE IRAs). Your contribution to a Xxxx XXX is not reduced by any amount you contribute to a Xxxxxxxxx Education Savings Account for the benefit of someone other than yourself. If you are the beneficiary of a Xxxxxxxxx Education Savings Account, additional limits may apply to you. Please contact your tax advisor for more information.
