Placement Operations Sample Clauses

Placement Operations. Collect haul tickets from each load of mixture delivered to the project and provide the Department’s copy to the Engineer approximately every hour, or as directed. Use a hand-held thermal camera or infrared thermometer, when a thermal imaging system is not used, to measure and record the internal temperature of the mixture as discharged from the truck or Material Transfer Device (MTD) before or as the mix enters the paver and an approximate station number or GPS coordinates on each ticket. Calculate the daily yield and cumulative yield for the specified lift and provide to the Engineer at the end of paving operations for each day unless otherwise directed. The Engineer may suspend production if the Contractor fails to produce and provide haul tickets and yield calculations by the end of paving operations for each day. Prepare the surface by removing raised pavement markers and objectionable material such as moisture, dirt, sand, leaves, and other loose impediments from the surface before placing mixture. Remove vegetation from pavement edges. Place the mixture to meet the typical section requirements and produce a smooth, finished surface with a uniform appearance and texture. Offset longitudinal joints of successive courses of hot-mix by at least 6 in. Place mixture so that longitudinal joints on the surface course coincide with lane lines and are not placed in the wheel path, or as directed. Ensure that all finished surfaces will drain properly. Place the mixture at the rate or thickness shown on the plans. The Engineer will use the guidelines in Table 13 to determine the compacted lift thickness of each layer when multiple lifts are required. The thickness determined is based on the rate of 110 lb./sq. yd. for each inch of pavement unless otherwise shown on the plans. Table 13
Sample 1
AutoNDA by SimpleDocs
Placement Operations. Collect haul tickets from each load of mixture delivered to the project and provide the Department’s copy to the Engineer approximately every hour, or as directed. Use a hand-held thermal camera or infrared thermometer to measure and record the internal temperature of the mixture as discharged from the truck or Material Transfer Device (MTD) before or as the mix enters the paver and an approximate station number or GPS coordinates on each ticket unless otherwise directed. Calculate the daily yield and cumulative yield for the specified lift and provide to the Engineer at the end of paving operations for each day unless otherwise directed. The Engineer may suspend production if the Contractor fails to produce and provide haul tickets and yield calculations by the end of paving operations for each day. Prepare the surface by removing raised pavement markers and objectionable material such as moisture, dirt, sand, leaves, and other loose impediments from the surface before placing mixture. Remove vegetation from pavement edges. Place the mixture to meet the typical section requirements and produce a smooth, finished surface with a uniform appearance and texture. Offset longitudinal joints of successive courses of hot-mix by at least 6 in. Place mixture so that longitudinal joints on the surface course coincide with lane lines, or as directed. Ensure that all finished surfaces will drain properly. Place the mixture at the rate or thickness shown on the plans. The Engineer will use the guidelines in Table 12 to determine the compacted lift thickness of each layer when multiple lifts are required. The thickness determined is based on the rate of 110 lb./sq. yd. for each inch of pavement unless otherwise shown on the plans. Table 12
Sample 1
Placement Operations. Chain of command in the event of unforeseen circumstances during construction • Procedures for surface preparation, application/installation, finishing, and curing • Method of protecting and finishing around bridge drains • Method of protecting and finishing along parapets • Method for controlling, measuring and maintaining overlay thickness, profile, surface tolerance, and texturing. • Environmental BMP's required to ensure that the overlay materials do not leave the site (including protective measures at inlets, scuppers, barrier drains, etc.)
Sample 1

Related to Placement Operations

  • Shift Operation When a three (3) shift operation is established by the Employer, the following conditions will apply: Those employees working on the day shift shall work eight (8) hours at the straight time rate. Those employees working on the afternoon shift shall work seven and one-half (7 1/2) hours per shift. A shift differential of one-seventh (1/7) shall be paid for all normal scheduled shift hours worked. Those employees working on the night shift shall work seven (7) hours per shift. A shift differential of one-fifth (1/5) shall be paid for all normal scheduled shift hours worked.

  • Current Operating Areas Where logging or road construction is in progress but not completed, unless agreed otherwise, Purchaser shall, before opera- tions cease annually, remove all temporary log culverts and construct temporary cross drains, drainage ditches, dips, berms, culverts, or other facilities needed to control erosion. Such protection shall be provided, prior to end of a Normal Operating Season, for all disturbed, unprotected ground that is not to be disturbed further prior to end of operations each year, including roads and associated fills, tractor roads, skid trails, and fire lines. When weather permits operations after Normal Operating Season, Pur- chaser shall keep such work on any additional disturbed areas as up to date as practicable.

  • Direct Operation System Agency may temporarily assume operations of a Grantee’s program or programs funded under this Contract when the continued operation of the program by Xxxxxxx puts, at risk, the health or safety of clients and/or participants served by Grantee.

  • Processing operations The personal data transferred will be subject to the following basic processing activities:

  • Business Operations Company will provide all necessary equipment, personnel and other appurtenances necessary to conduct its operations. Company will conduct its business operations hereunder in a lawful, orderly and proper manner, considering the nature of such operations, so as not to unreasonably annoy, disturb, endanger or be offensive to others on the Airport. Company will provide all services under this Agreement on a fair and reasonable basis to all users of the Airport. Service will be prompt, courteous and efficient.

  • Operations Logs Seller shall maintain a complete and accurate log of all material operations and maintenance information on a daily basis. Such log shall include, but not be limited to, information on power production, fuel consumption, efficiency, availability, maintenance performed, outages, results of inspections, manufacturer recommended services, replacements, electrical characteristics of the generators, control settings or adjustments of equipment and protective devices. Seller shall maintain this information for at least two (2) years and shall provide this information electronically to Buyer within one day of Buyer’s request.

  • Operations As of the date hereof, the Company has not conducted, and prior to the IPO Closing the Company will not conduct, any operations other than organizational activities and activities in connection with offerings of its securities.

  • USE AND STORAGE GENERAL PRACTICES You herein acknowledge that XS Power Batteries may set up any such practices and/or limits regarding the use of our Services, without limitation of the maximum number of days that any email, message posting or any other uploaded content shall be retained by XS Power Batteries, nor the maximum number of email messages that may be sent and/or received by any member, the maximum volume or size of any email message that may be sent from or may be received by an account on our Service, the maximum disk space allowable that shall be allocated on XS Power Batteries's servers on the member's behalf, and/or the maximum number of times and/or duration that any member may access our Services in a given period of time. In addition, you also agree that XS Power Batteries has absolutely no responsibility or liability for the removal or failure to maintain storage of any messages and/or other communications or content maintained or transmitted by our Services. You also herein acknowledge that we reserve the right to delete or remove any account that is no longer active for an extended period of time. Furthermore, XS Power Batteries shall reserve the right to modify, alter and/or update these general practices and limits at our discretion. MODIFICATIONS XS Power Batteries shall reserve the right at any time it may deem fit, to modify, alter and or discontinue, whether temporarily or permanently, our service, or any part thereof, with or without prior notice. In addition, we shall not be held liable to you or to any third party for any such alteration, modification, suspension and/or discontinuance of our Services, or any part thereof.

  • Interim Operations (a) The Company covenants and agrees as to itself and its Subsidiaries that, from and after the execution of this Agreement and prior to the Effective Time (unless Parent shall otherwise approve in writing, which approval shall not be unreasonably withheld, conditioned or delayed, and except as (1) required by applicable Law, (2) expressly required by this Agreement or (3) otherwise expressly disclosed in Section 6.1(a) of the Company Disclosure Letter), the Company shall use its reasonable best efforts to conduct its business and the business of its Subsidiaries in the ordinary course of business consistent with past practice and each of the Company and its Subsidiaries shall, subject to compliance with the specific matters set forth below, use reasonable best efforts to preserve its business organization intact and maintain the existing relations and goodwill with Governmental Entities, customers, suppliers, distributors, licensors, creditors, lessors, employees and business associates and others having material business dealings with it and keep available the services of the Company and its Subsidiaries’ present employees and agents. Without limiting the generality of, and in furtherance of, the foregoing, the Company covenants and agrees as to itself and its Subsidiaries that, from and after the date of this Agreement and prior to the Effective Time, except (A) as required by applicable Law, (B) as Parent may approve in writing (such approval not to be unreasonably withheld, conditioned or delayed), (C) as expressly disclosed in Section 6.1(a) of the Company Disclosure Letter or (D) as expressly provided for in this Agreement, the Company shall not and will not permit any of its Subsidiaries to:

  • PROFESSIONAL DEVELOPMENT AND EDUCATIONAL IMPROVEMENT A. The Board agrees to implement the following:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!