ORIGINAL CONDITIONS A. All reinsurance under this Contract shall be subject to the same rates, terms, conditions, waivers and interpretations and to the same modifications and alterations as the Policy, subject to the terms and conditions of this Contract, and the Reinsurer shall be credited with its exact proportion of the Insured's premiums due to the Company under the Policy.
B. Nothing herein shall in any manner create any obligation or establish any right against the Reinsurer in favor of third parties or any persons not parties to this Contract except as provided with respect to the Insured in this Contract or in the Assumption of Liability Endorsement.
C. In the event of a Quota Share Reduction, as that term is defined under the Policy, each Subscribing Reinsurer's participation percentage in this Contract shall be increased in the proportion that 100% bears to the total Subscribing Reinsurer's participation after the Quota Share Reduction. For the avoidance of doubt, such participation percentage increase is necessary to account for the reduction provisions of the Reduction Under Quota Share Contract Article of the Policy. If applicable, the Remaining Aggregate Retention, as that term is defined under the Policy, would likewise be adjusted. Any termination of a Subscribing Reinsurer's participation in this Contract shall not require the consent of any other Subscribing Reinsurer. As respects each Subscribing Reinsurer still participating on this Contract following the Reinsurer Reduction Date, as that term is defined under the Policy, in no event shall its share of the aggregate limit following the Reinsurer Reduction Date be greater than its share of the aggregate limit prior to the Reinsurer Reduction Date, notwithstanding that its participation percentage may increase as a result thereof. As an example, where the aggregate limit is $300,000,000 with each of three Subscribing Reinsurers retaining a 33.33% share ($100,000,000 each), and one Subscribing Reinsurer's share is terminated, then the resulting aggregate limit becomes $200,000,000 with each of the two remaining Subscribing Reinsurers retaining a 50.00% share (i.e., 33.33% x 100%/66.67%). As respects each of the two remaining Subscribing Reinsurers, its share of the aggregate limit shall remain at $100,000,000.
Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
Supplemental Conditions 1. All individuals involved, and all others who might possibly contribute to the acceptable adjustment of a grievance, are authorized and urged to testify with full assurance that no reprisal will follow by reason of such participation.
2. Upon the final determination of the grievance, the documents, communication and records, excepting a record of the grievance and the final adjustment thereof, and excepting records required by law to be kept and maintained, shall be destroyed.
3. At each step of the procedure, the grievant shall be entitled to be accompanied by legal counsel or any other parties the grievant may designate.
4. All grievance hearings shall be confidential.
5. All discussions and hearings shall be conducted at times other than when classes are in session during the school day.
6. It is the responsibility of the grievant to utilize the procedure for adjusting grievances as soon as he is aware of grievance.
7. Excluded from the grievance procedure shall be matters for which law mandates another method of review.
8. The filing of a formal grievance at all levels shall be in writing and shall be reasonably specific as to the nature of the complaint. The grievance should, to the extent possible, describe the alleged event or act giving rise to the grievance including the time, date, and place of the event or act and the names and addresses of any witnesses thereto. The grievant must file Grievance Report Form, Appendix "A".
9. Nothing in this grievance procedure shall be construed as prohibiting a grievant from seeking a judgment or ruling in a court of law.
10. The number of days indicated at each level should be considered as a maximum and every effort should be made to expedite the process. The time limits specified may, however, be extended by mutual agreement.
11. In the event a grievance is filed at such time that it cannot be processed through all the steps in this grievance procedure by the end of the school year and if left unresolved until the beginning of the following school year could result in irreparable harm to the grievant, the time limit set forth herein shall be reduced so that the grievance procedure may be exhausted prior to the end of the school year or within a maximum of thirty (30) days thereafter.
12. If the Board or any of its administrative staff do not present a written decision within the time allotted after the grievance hearing, such failure to act shall be an admission that the grievance was justified and the grievant shall receive the remedy he is seeking.
General Condition The Aircraft will:
(a) be clean by international airline standards;
(b) have installed the full complement of engines and other material equipment, parts and accessories and loose equipment required under the Agreed Maintenance Program and installed in the other Boeing/XxXxxxxxx Xxxxxxx MD-87 aircraft operated by Lessee (together with any additions and improvements thereto, or replacements thereof, effected pursuant to and in accordance with this Agreement) and be in a condition suitable for immediate operation in commercial service;
(c) be airworthy, conform to type design and be in a condition for safe operation with all equipment, components and systems operating in accordance with their intended use and within limits established by the manufacturer and approved by the Aviation Authority, and all pilot discrepancies and deferred maintenance items cleared on a terminating action basis;
(d) have a U.S. Standard Transport Category Certificate of Airworthiness issued by the FAA in accordance with FAR Part 129 (or if required by the Lessor, be eligible for a valid export certificate of airworthiness with respect to the Aircraft issued by the Aviation Authority) and unconditionally meet all FAA requirements for immediate operations under FAR Part 129;
(e) comply with the manufacturer's original specification to the extent that it so complied on the date of this Agreement and subject to any alterations made pursuant to and in accordance with this Agreement after such date;
(f) have undergone, immediately prior to redelivery, the MSG-3 equivalent of a "C" Check in accordance with the Agreed Maintenance Program so that all Airframe inspections falling due within the next 3,000 hours, 3,000 cycles or twelve months (whichever is applicable and most limiting) of operation in accordance with the Agreed Maintenance Program have been accomplished;
(g) if the Flight Hours of the Airframe remaining until the scheduled completion of the Major Checks (collectively, a "Complete Heavy Work Package") on the Expiry Date are:
(i) less than on the Delivery Date, then the Lessee shall pay to the Lessor an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are less than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00, provided, however, that no payment shall be due from -------- ------- Lessee under this clause (g)(i) if, immediately preceding the redelivery of the Aircraft, the Lessee has performed a Complete Heavy Work Package;
(ii) more than on the Delivery Date, then the Lessor shall pay to the Lessee an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are more than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00; For the avoidance of doubt, any amounts due to the Lessor pursuant to this clause (g) may be set off against any amounts due to Lessee pursuant to paragraphs (b) or (d) of Schedule 10 and a payment made for the net amount due;
(h) have complied with all airworthiness directives and mandatory orders affecting that model of Aircraft issued by the Aviation Authority (and, if different, the FAA) that are required terminating action during the Term;
(i) no special or unique manufacturer inspection or check requirements specific to the Aircraft will exist unless there is no terminating action available from any source;
(j) have installed all applicable vendor's and manufacturer's service bulletin kits received free of charge by the Lessee that are appropriate for the Aircraft and, to the extent not installed, those kits which have been received with respect to this Aircraft will be furnished free of charge to the Lessor;
(k) be free of any system-related leaks which are outside maintenance manual limitations;
(l) all fluid reservoirs (including fuel, oil, oxygen, hydraulic and water) will be full, and the waste tank serviced in accordance with the manufacturer's instructions;
(m) if required under the Approved Maintenance Program, all fuel tanks will have recently undergone an anti-fungus/biological growth contamination laboratory evaluation, and any excessive levels of contamination corrected;
(n) have an FAA-approved aging aircraft program in operation and up-to-date; and
(o) have all signs and decals clean, secure and legible.
Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.
SPECIAL CONDITIONS A submitted appeal must;
– OTHER SPECIAL CONDITIONS I.
12.1 Exchange rate applicable for the conversion of currencies into euro Payments shall be made by the Commission in euro. The co-ordinator shall submit the payment requests in accordance with article I.5.3, including the underlying financial statements, in euro. By way of derogation from article II.16.1, any conversion of actual costs into euro shall be made by the beneficiary at the monthly accounting rate established by the Commission and published on its website applicable on the day when the cost was incurred.
ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:
Minimum scope of coverage Commercial general coverage shall be at least as broad as Insurance Services Office Commercial General Liability occurrence form CG 0001 (ed. 11/88) or Insurance Services Office form number GL 0002 (ed. 1/73) covering comprehensive General Liability and Insurance Services Office form number GL 0404 covering Broad Form Comprehensive General Liability. Automobile coverage shall be at least as broad as Insurance Services Office Automobile Liability form CA 0001 (ed. 12/90) Code 1 (“any auto”). No endorsement shall be attached limiting the coverage.
