Procedures for Alternate Sourcing Sample Clauses

Procedures for Alternate Sourcing. (a) In the event of the occurrence of an event as described in Sections 3.8 and 3.10, Bayer Canada shall respond in writing to HQ within two (2) Business Days, or such longer time period if agreed to by HQ and Bayer Canada, confirming whether it can provide Replacement Products and, if so, shall provide comprehensive specifications and proposed delivery schedule for such Replacement Products (the “Proposal”). If the Proposal is acceptable to HQ, HQ will so advise Bayer Canada and the supply of the Replacement Product shall be governed by the terms of this Agreement. (b) If HQ, acting reasonably, rejects the Proposal or if no Proposal is offered within the stipulated or agreed time frame, HQ may proceed to locate Replacement Products from a third party selected by HQ. The quantity of Replacement Product purchased by HQ pursuant to this paragraph shall be obtained solely for the purpose of averting any Shortage. Talecris and Bayer Canada acknowledge that HQ has the right to purchase sufficient Replacement Product to reestablish its Target Level inventory. Bayer Canada shall have the right to review the proposed purchase of Replacement Product by HQ and consent of Bayer Canada to the purchase is required if reimbursement is to be sought by HQ. Bayer Canada shall respond to HQ within one (1) Business Day of receipt of the notice of the proposed purchase of Replacement Product. If Bayer Canada fails to respond in one (1) Business Day, then it shall be deemed to have consented. Consent of Bayer Canada will not be unreasonably withheld. (c) If Replacement Product is purchased by HQ from a third party with the consent of Bayer Canada, or if it is subsequently determined that Bayer Canada’s refusal to consent to the purchase was unreasonable, Bayer Canada shall compensate HQ for the amount, if any, by which the price HQ would have had to pay to Bayer Canada for the Commercial Product had it been delivered pursuant to this Agreement is less than the price paid to purchase the Replacement Product. Such amounts shall be due and payable, in cash or in credit at the option of Bayer Canada within fifteen (15) days of delivery by HQ of an invoice for such amounts. Compensation by Bayer Canada of HQ pursuant to this paragraph shall be the limit of Bayer Canada’s liability hereunder. (d) Nothing in this Section 3.9 shall limit the right of any party to terminate this Agreement pursuant to Article 16 should the occurrence of an event as described in Section 3.8 constitute a ...
AutoNDA by SimpleDocs

Related to Procedures for Alternate Sourcing

  • Procedures for LNP Request The Parties shall provide for the requesting of End Office LNP capability on a reciprocal basis through a written request. The Parties acknowledge that Verizon has deployed LNP throughout its network in compliance with FCC 96-286 and other applicable FCC Regulations. 15.4.1 If Party B desires to have LNP capability deployed in an End Office of Party A, which is not currently capable, Party B shall issue a LNP request to Party A. Party A will respond to the Party B, within ten (10) days of receipt of the request, with a date for which LNP will be available in the requested End Office. Party A shall proceed to provide for LNP in compliance with the procedures and timelines set forth in FCC 00-000, Xxxxxxxxx 80, and FCC 97-74, Paragraphs 65 through 67. 15.4.2 The Parties acknowledge that each can determine the LNP-capable End Offices of the other through the Local Exchange Routing Guide (LERG). In addition, the Parties shall make information available upon request showing their respective LNP-capable End Offices, as set forth in this Section 15.4.

  • Procedures for Advances (a) In the case of the making of any Advance, the repayment of any Advance, or any termination, increase or reduction of the Facility Amount and prepayments of Advances, the Borrower shall give the Administrative Agent a Borrower Notice. Each Borrower Notice shall specify the amount (subject to Section 2.1 hereof) of Advances to be borrowed or repaid and the Funding Date or repayment date (which, in all cases, shall be a Business Day) and whether such Advance is a Revolver Advance or a Swing Advance. (b) Subject to the conditions described in Section 2.1, the Borrower may request an Advance from the Lenders by delivering to the Administrative Agent at certain times the information and documents set forth in this Section 2.2. (c) No later than 12:00 noon (New York, New York time) five (5) Business Days prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Borrower shall notify (i) the Collateral Custodian by delivery to the Collateral Custodian of written notice of such proposed Funding Date, and (ii) the Administrative Agent by delivery to the Administrative Agent of a credit report and transaction summary for each Loan that is the subject of the proposed Advance setting forth the credit underwriting by the Originator of such Loan, including without limitation a description of the Obligor and the proposed loan transaction in the form of Exhibit M hereto; provided that, in the case of Advances funding Revolver Loans, the requirements of this Section 2.2(c) shall apply only with respect to the first Advance to be made with respect to each such Revolver Loan. By 5:00 p.m. (New York, New York time) on the next Business Day, the Administrative Agent shall use its best efforts to confirm to the Borrower the receipt of such items and whether it has reviewed such items and found them to be complete and in proper form. If the Administrative Agent makes a determination that the items are incomplete or not in proper form, it will communicate such determination to the Borrower. Failure by the Administrative Agent to respond to the Borrower by 5:00 p.m. (New York, New York time) on the day the related Funding Request is delivered by the Borrower shall constitute an implied determination that the items are incomplete or not in proper form. The Borrower will take such steps requested by the Administrative Agent to correct the problem(s). In the event of a delay in the actual Funding Date due to the need to correct any such problems, the Funding Date shall be no earlier than two (2) Business Days after the day on which the Administrative Agent confirms to the Borrower that the problems have been corrected. (d) No later than 1:00 p.m. (New York, New York time) one (1) Business Day prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Administrative Agent, each Managing Agent and the Collateral Custodian, as applicable, shall receive or shall have previously received the following: (i) a Funding Request in the form of Exhibit A; (ii) a wire disbursement and authorization form shall be delivered to the Administrative Agent; and (iii) a certification substantially in the form of Exhibit H concerning the Collateral Custodian’s receipt of certain documentation relating to the Eligible Loan(s) related to such Advance shall be delivered to the Administrative Agent, which may be delivered either as a separate document or incorporated in the Monthly Report. Each Funding Request for a Revolver Advance shall specify the aggregate amount of the requested Advance, which shall be in an amount equal to at least $500,000. (e) No later than 12:00 noon (New York, New York time) on the Business Day proposed for a Swing Advance, the Administrative Agent shall receive or shall have previously received the following: (i) a Funding Request in the form of Exhibit A; and (ii) a wire disbursement and authorization form. (f) Each Funding Request shall be accompanied by (i) a Borrower Notice, depicting the outstanding amount of Advances under this Agreement and representing that all conditions precedent for a funding have been met, including a representation by the Borrower that the requested Advance shall not, on the Funding Date thereof, exceed the Availability on such day, (ii) a calculation of the Borrowing Base as of the applicable Funding Date (which calculation may, for avoidance of doubt, take into account (A) Loans which will become Transferred Loans on or prior to such Funding Date and (B) an updated Loan List including each Loan that is subject to the requested Advance, (C) the proposed Funding Date, and (D) wire transfer instructions for the Advance; provided, however, the Funding Request for a Swing Advance shall be required to contain only the information described in Section 2.2(e)(i) and (ii) above. A Funding Request shall be irrevocable when delivered; provided however, that if the Borrowing Base calculation delivered pursuant to clause (ii) above includes a Loan which does not become a Transferred Loan on or before the applicable Funding Date as anticipated, and the Borrower cannot otherwise make the representations required pursuant to clause (i) above, the Borrower shall revise the Funding Request accordingly, and shall pay any loss, cost or expense incurred by any Lender in connection with the broken funding evidenced by such revised Funding Request. (g) On the Funding Date following the satisfaction of the applicable conditions set forth in this Section 2.2 and Article III, the Lenders shall make available to the Administrative Agent at its address listed beneath its signature on its signature page to this Agreement (or on the signature page to the Joinder Agreement pursuant to which it became a party hereto), for deposit to the account of the Borrower or its designee in same day funds, at the account specified in the Funding Request, an amount equal to such Lender’s ratable share of the Advance then being made (except that in the case of a Swing Advance, the Swingline Lender will make available to the Borrower the amount of any such Swing Advance). Each wire transfer of an Advance to the Borrower shall be initiated by the applicable Lender no later than 3:00 p.m. (New York, New York time) on the applicable Funding Date.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • Auction Schedule; Method of Submission of Orders (a) The Funds and the Auction Agent shall conduct Auctions for each series of Preferred Shares in accordance with the schedule set forth below. Such schedule may be changed at any time by the Auction Agent with the consent of the Fund, which consent shall not be withheld unreasonably. The Auction Agent shall give notice of any such change to BD. Such notice shall be received prior to the first Auction Date on which any such change shall be effective. Time Event ---- ----- By 9:30 A.M. Auction Agent advises the Funds and the Broker-Dealers of the Maximum Rate as set forth in Section 3.2(a) hereof.

  • Review by the Bank of Procurement Decisions The Procurement Plan shall set forth those contracts which shall be subject to the Bank’s Prior Review. All other contracts shall be subject to Post Review by the Bank.

  • Important Information About Procedures for Opening a New Account To help the government fight the funding of terrorism and money laundering activities, Federal law requires all financial organizations to obtain, verify, and record information that identifies each person who opens an account. What this means for you: When you open an account, you are required to provide your name, residential address, date of birth, and identification number. We may require other information that will allow us to identify you.

  • GUIDELINES FOR REVIEWS We may provide you areas on the Site to leave reviews or ratings. When posting a review, you must comply with the following criteria: (1) you should have firsthand experience with the person/entity being reviewed; (2) your reviews should not contain offensive profanity, or abusive, racist, offensive, or hate language; (3) your reviews should not contain discriminatory references based on religion, race, gender, national origin, age, marital status, sexual orientation, or disability; (4) your reviews should not contain references to illegal activity; (5) you should not be affiliated with competitors if posting negative reviews; (6) you should not make any conclusions as to the legality of conduct; (7) you may not post any false or misleading statements; and (8) you may not organize a campaign encouraging others to post reviews, whether positive or negative. We may accept, reject, or remove reviews in our sole discretion. We have absolutely no obligation to screen reviews or to delete reviews, even if anyone considers reviews objectionable or inaccurate. Reviews are not endorsed by us, and do not necessarily represent our opinions or the views of any of our affiliates or partners. We do not assume liability for any review or for any claims, liabilities, or losses resulting from any review. By posting a review, you hereby grant to us a perpetual, non-exclusive, worldwide, royalty-free, fully-paid, assignable, and sublicensable right and license to reproduce, modify, translate, transmit by any means, display, perform, and/or distribute all content relating to reviews.

  • Additional Wet Weather Procedure 14.15.1 Remaining On Site a) for more than an accumulated total of four hours of ordinary time in any one day; or b) after the meal break, as provided for in clause 17.1 of the Award, for more than an accumulated total of 50% of the normal afternoon work time; or c) during the final two hours of the normal work day for more than an accumulated total of one hour, the Enterprise will not be entitled to require the employees to remain on site beyond the expiration of any of the above circumstances.

  • Referral Procedures Section 1. For Local Unions now having a job referral system as contained in their Collective Bargaining Agreement, the Contractor agrees to utilize such system and it shall be used exclusively by such Contractor, except as it may be modified by this Article. Referrals shall not be affected by obligations of Union membership or the lack thereof. Where airport security clearance requirements apply to work to be performed, the Contractor shall inform the Union’s hiring hall dispatcher of those requirements when requesting workers. Section 2. In the event that Local Unions are unable to fill any request for employees within the time specified by the local CBAs the Contractor may employ applicants from any other available source. The Contractor shall inform the Union of the name and social security number of any applicants hired from other sources and shall refer the applicant to the Local Union for dispatch to the projects prior to the commencement of work. Section 3. There shall be no discrimination against any employee or applicant for employment because of his/her membership or non-membership in the union or based upon race, creed, color, sex, age or national origin, or any other legally protected class of such employee or applicant. Section 4. No employee covered by this Agreement shall be required to join any Union as a condition of being employed on the project; provided, however, that an employee who is a member of the referring union at the time of the referral shall maintain that membership while employed under the Agreement. All employees shall, however, be required to comply with the union security provision of the applicable Collective Bargaining Agreement, for the period during which they are performing on-site work, except as modified by this Agreement. The Contractor agrees to deduct union dues or representation fees, whichever is applicable, from the pay of any employee who executes a voluntary authorization for such deductions and to remit the dues to the Union or Council. Section 5. The parties agree that where a Contractor is not party to a current Collective Bargaining Agreement with the Union having jurisdiction over the affected work, the Contractor may request by name, and the Local will honor, referral of up to a maximum of five (5) persons per each contractor (“core” employees), provided that the Contractor first demonstrate that those persons possess the following qualifications: (1) Any license required by state or federal law for the project work to be performed; (2) Have worked a total of at least one thousand (1,000) hours in the construction craft during the prior three (3) years; (3) Were on the Contractor’s active payroll for at least sixty (60) out of the one hundred eighty (180) calendar days prior to the contract award; (4) Have the ability to perform the work safely. The Contractor may elect to hire its first “core” employee to be a xxxxxxx. After the contractor hires his first core employee, the Union will refer to such contractor one journeyman employee from the hiring hall out-of–work list for the affected trade or craft, then refer one of such Contractor’s “core” employees as a journeyman, and shall, alternate, one core employee and one employee from the out-of-work list, until such Contractor’s crew requirements are met or until such Contractor has hired five (5) “core” employees, whichever occurs first. Thereafter, all additional employees in the affected trade or craft shall be hired exclusively from the hiring hall out-of-work list(s). For the duration of the Contractor’s work the ratio of “core” employees to hiring hall referrals shall be maintained and when the Contractor’s workforce is reduced, employees shall be reduced in the same ratio as was applied in the initial hiring. All employees, core and union, shall be dispatched from the appropriate union. Trust benefits shall be paid on all employees, core and union. Section 6. Upon referral or dispatch from a Union, “turnaround” or refusal of any worker by the Contractors, requires written explanation from the Contractor that shall be communicated from the Prime Contractor to the Port and affected Union within 48 hours. Section 7. Individual seniority will not be recognized or applied to employees working on the project. This provision will not interfere with or supersede the use by individual Contractors of “call lists” maintained by such Contractor pursuant to addenda to the local Collective Bargaining Agreement between such Contractor and a Union signatory to this Agreement. Section 8. The selection of craft foremen and/or general foremen and the number of such foremen and/or general foremen required shall be entirely the responsibility of the Contractor. Craft foremen shall be designated working foremen at the request of the Contractor. Craft workers covered by this Agreement will, in the normal day- to-day operations, take their direction and supervision from their xxxxxxx.

  • Procedures for Borrowing Subject to the prior satisfaction of all other applicable conditions to the making of a Term Loan set forth in this Agreement, to obtain a Term Loan, Borrower shall notify the Lenders (which notice shall be irrevocable) by electronic mail, facsimile, or telephone by 12:00 noon Eastern time three (3) Business Days prior to the date the Term Loan is to be made. Together with any such electronic, facsimile or telephonic notification, Borrower shall deliver to the Lenders by electronic mail or facsimile a completed Disbursement Letter executed by a Responsible Officer or his or her designee. The Lenders may rely on any telephone notice given by a person whom a Lender reasonably believes is a Responsible Officer or designee. On the Funding Date, each Lender shall credit and/or transfer (as applicable) to the Designated Deposit Account, an amount equal to its Term Loan Commitment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!