Products and Pricing Initiatives Sample Clauses

Products and Pricing Initiatives. The prices in Attachment A are preliminary, tentative and subject to validation by Supplier of anticipated xxxx of material, assembly, test and other transformation costs that are included in the prices in Attachment A. Supplier will verify promptly, after the receipt of the complete design package (including but not limited to, xxxx of materials, approved vendor list and released controlled drawings and documents) from Dot Hill, the accuracy of such costs included in such prices, and advise Dot Hill promptly of any increases or decreases in prices to Dot Hill arising or resulting from any material discrepancies between anticipated costs that Supplier expects to incur and those costs included in the prices in Attachment A. Dot Hill may purchase Product(s) from Supplier based on the prices set forth in Attachment A if there are no such material discrepancies which result in an increase in prices for Product(s) to Dot Hill. If, however, there are material discrepancies which result in an increase in prices for Product(s) to Dot Hill, then Dot Hill and Supplier shall work together to attempt to resolve immediately such material discrepancies and Dot Hill may purchase Product(s) from Supplier, at Dot Hill’s option, at either (i) the then-adjusted, updated pricing that include such material discrepancies or the (ii) the then-current updated agreed prices once such material discrepancies are resolved. Attachment A shall be updated at any time and from time to time by Dot Hill and Supplier to reflect any product changes and cost and other price changes. At a minimum, Dot Hill shall receive from Supplier a reduction in then-current prices for the cost reductions described in Section 3.3.3 (Cost Reductions) of the Agreement. All cost reductions provided by Supplier shall be cumulative, i.e., the then-current prices in Attachment A will be reduced further for such costs reductions. During the first week of each calendar quarter and more frequently as requested by Dot Hill, Supplier shall provide a detailed cost breakdown to Dot Hill for each Product covered by this Second Award Letter for the then-current quarter and estimates for the following [***]. Such breakdown will cover all then-current costs for the Product(s).
Sample 1
AutoNDA by SimpleDocs
Products and Pricing Initiatives 
Sample 1Sample 2Sample 3See All (4)

Related to Products and Pricing Initiatives

  • Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.

  • Pricing Information Each Fund or its designee will furnish Plan Provider on each business day that the New York Stock Exchange is open for business ("Business Day"), with (i) net asset value information as of the close of trading (currently 4:00 p.m. Eastern Time) on the New York Stock Exchange or as at such later times at which a Fund's net asset value is calculated as specified in such Fund's prospectus ("Close of Trading"), (ii) dividend and capital gains information as it becomes available, and (iii) in the case of income Funds, the daily accrual or interest rate factor (mil rate). The Funds shall use their best efforts to provide such information to Plan Provider by 6:00 p.m. Central Time on the same Business Day. Distributor or its affiliate will provide Plan Provider (a) daily confirmations of Account activity within five Business Days after each day on which a purchase or redemption of Shares is effected for the particular Account, (b) if requested by Plan Provider, quarterly statements detailing activity in each Account within fifteen Business Days after the end of each quarter, and (c) such other reports as may be reasonably requested by Plan Provider.

  • Products and Services General Information

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!