Project Proposal Windows Sample Clauses

Project Proposal Windows. The Office of the Interconnection shall provide notice to stakeholders of a 60-day proposal window for Short-term Projects and a 120-day proposal window for Long-lead Projects and Economic-based Enhancements or Expansions. The specifics regarding whether or not the following types of violations or projects are subject to a proposal window are detailed in the Operating Agreement, Schedule 6, section 1.5.8(m) for Immediate-need Reliability Projects; Operating Agreement, Schedule 6, section 1.5.8(n) for reliability violations on transmission facilities below 200 kV; and Operating Agreement, Schedule 6, section 1.5.8(p) for violations on transmission substation equipment. The Office of Interconnection may shorten a proposal window should an identified need require a shorter proposal window to meet the needed in-service date of the proposed enhancements or expansions, or extend a proposal window as needed to accommodate updated information regarding system conditions. The Office of the Interconnection may shorten or lengthen a proposal window that is not yet opened based on one or more of the following criteria: (1) complexity of the violation or system condition; and (2) whether there is sufficient time remaining in the relevant planning cycle to accommodate a standard proposal window and timely address the violation or system condition. The Office of the Interconnection may lengthen a proposal window that already is opened based on or more of the following criteria: (i) changes in assumptions or conditions relating to the underlying need for the project, such as load growth or Reliability Pricing Model auction results; (ii) availability of new or changed information regarding the nature of the violations and the facilities involved; and (iii) time remaining in the relevant proposal window. In the event that the Office of the Interconnection determines to lengthen or shorten a proposal window, it will post on the PJM website the new proposal window period and an explanation as to the reasons for the change in the proposal window period. During these windows, the Office of the Interconnection will accept proposals from existing Transmission Owners and Nonincumbent Developers for potential enhancements or expansions to address the posted violations, system conditions, economic constraints, as well as Public Policy Requirements.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs

Related to Project Proposal Windows

  • Bidding and Proposal Phase 1.5.1 In conjunction with the development of the Guaranteed Maximum Price and at other times as appropriate to the Project, the Architect/Engineer shall assist the Owner and Construction Manager by receiving and recording requests for Bid and Request for Proposal (“RFP”) Documents, receiving and resolving questions about Bid and RFP Documents; preparing addenda, issuing addenda, and accounting for addenda issued; attending pre-bid and pre-proposal conferences and HUB meetings; evaluating bids and proposals; and assisting in preparing and awarding multiple contracts for construction. Architect/Engineer shall answer inquiries from bidders and proposers at Owner’s request, and shall prepare and issue any necessary addenda to the bidding or proposal documents.

  • Technical Proposal The technical proposal may be presented in free format. It shall not exceed ten pages, not counting the CVs. It shall respect the following page limit and structure: • Technical methodology (max. 7 pages) • Quality management (max. 1 page) • Project management (max. 1 page) • Resource management (proposal (max. 1 page) + CVs of experts)

  • Cost Proposal After the Approved Working Drawings are approved by Landlord and Tenant, and the Contractor and subcontractors have been selected pursuant to Section 4.1 above, Landlord shall provide Tenant with a cost proposal in accordance with the Approved Working Drawings setting forth the reconciled bids and copies of all sub-bids, which cost proposal shall include, as nearly as possible, the cost of all Tenant Improvement Allowance Items to be incurred in connection with the construction of the Tenant Improvements (the "COST PROPOSAL"). The Cost Proposal shall reflect bids that will be priced by Contractor on an individual item-by-item or trade-by-trade basis. Landlord and Tenant shall work together in good faith in an attempt to agree upon a mutually acceptable Cost Proposal as soon as reasonably possible. Notwithstanding the foregoing, portions of the cost of the Tenant Improvements may be delivered to Tenant as such portions of the Tenant Improvements are priced by Contractor (on an individual item-by-item or trade-by-trade basis), even before the Approved Working Drawings are completed (the "PARTIAL COST PROPOSAL") for purposes of facilitating the early purchase of items and construction of the same. Tenant shall approve and deliver the Cost Proposal to Landlord within seven (7) business days of the receipt of the same, or, as to a Partial Cost Proposal within five (5) business days of receipt of the same, and upon receipt of the same by Landlord, Landlord shall be released by Tenant to purchase the items set forth in the Cost Proposal or Partial Cost Proposal, as the case may be, and to commence the construction relating to such items. If Tenant disapproves the Cost Proposal or Partial Cost Proposal, Tenant shall provide Landlord with a reasonably sufficient explanation, and in such event, Landlord and Tenant shall use good faith, diligent efforts to work with each other and Contractor to address Tenant's reasons for disapproving the Cost Proposal or Partial Cost Proposal, whichever is the case and a new Cost Proposal (or Partial Cost Proposal, as applicable) shall be prepared and the process described in this Section 4.2 shall be repeated. The date by which Tenant must approve and deliver the Cost Proposal or the last Partial Cost Proposal to Landlord, as the case may be, shall be known hereafter as the "COST PROPOSAL DELIVERY DATE". The total of all Partial Cost Proposals, if any, shall be known as the Cost Proposal.

  • Proposal Work Authorizations The State may issue a proposal work authorization under which the Engineer will submit a proposal for additional work. The proposal must be for additional work that is within the defined scope of work under this contract. The amount to be paid for a proposal work authorization will be a lump sum for each proposal. The lump sum payment will be no less than two percent (2%) and no more than four percent (4%) of the State's estimate of the cost of the additional work. The Engineer may elect without penalty not to submit a proposal in response to a proposal work authorization. Any proposal submitted in response to a proposal work authorization will be the sole property of the State. The State may, at its option, issue similar or identical proposal work authorizations under other contracts, and the proposals submitted in response to the various proposal work authorizations may be compared by the State for the purpose of determining the contract under which the work will be awarded. The determination of the contract under which the work will be awarded will be based on the design characteristics of the proposal and the Engineer's qualifications and will not consider the Engineer's rates.

  • Technical Proposals Technical proposal information will be streamlined, e.g., the Government anticipates written proposals consisting of thirty (30) pages or less stating compliance or exception to requirements, risks, assumptions and conflict of interest issues. Proposals shall not merely restate PWS/SOO requirements. Written technical proposals shall normally address: * Technical Approach and descriptive narrative of the contractor's understanding of the requested effort * PWS in response to a SOO * Integrated Master Plan (if applicable) * Integrated Master Schedule (if applicable) * Key Personnel Assigned * Quantities/Hours of Personnel by Labor Categories and narrative justification (if applicable) * Other Direct Costs (ODCs) (materials and supplies, travel, training, etc.(quantities and types only)) * Period of Performance * Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI) * Security (including clearance level) * Teaming Arrangement (including subcontracting; identify new ACAs) * Small Business Plan (if a large business) * Other Pertinent Data, such as assumptions made.

  • Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts.

  • ROAD WORK PHASE APPROVAL Purchaser shall obtain written approval from the Contract Administrator upon completion of each of the following phases of road work:  Drainage installation  Subgrade compaction  Rock compaction SUBSECTION RESTRICTIONS

  • Additional proposals If the Company at any time during the continuance of this Agreement desires to modify expand or otherwise vary its activities carried on pursuant to this Agreement beyond those specified in any approved proposal, it shall give notice of such desire to the Minister and within 2 months after giving such notice shall submit to the Minister detailed proposals in respect of such modifications expansions or variations and such other matters as the Minister may require. The provisions of clause 4 and 5 (including (for the avoidance of doubt) clause 5(9)) shall apply, the necessary changes being made, to proposals submitted pursuant to this clause.

  • Project Plan Development of Project Plan Upon the Authorized User’s request, the Contractor must develop a Project Plan. This Project Plan may include Implementation personnel, installation timeframes, escalation procedures and an acceptance plan as appropriate for the Services requested. Specific requirements of the plan will be defined in the RFQ. In response to the RFQ, the Contractor must agree to furnish all labor and supervision necessary to successfully perform Services procured from this Lot. Project Plan Document The Contractor will provide to the Authorized User, a Project Plan that may contain the following items: • Name of the Project Manager, Contact Phone Numbers and E-Mail Address; • Names of the Project Team Members, Contact Phone Numbers and E-Mail Address; • A list of Implementation milestones based on the Authorized User’s desired installation date; • A list of responsibilities of the Authorized User during system Implementation; • A list of designated Contractor Authorized Personnel; • Escalation procedures including management personnel contact numbers; • Full and complete documentation of all Implementation work; • Samples of knowledge transfer documentation; and • When applicable, a list of all materials and supplies required to complete the Implementation described in the RFQ. Materials and Supplies Required to Complete Implementation In the event that there are items required to complete an Implementation, the Contractor may request the items be added to its Contract if the items meet the scope of the Contract. Negotiation of Final Project Plan If the Authorized User chooses to require a full Project Plan, the State further reserves the right for Authorized Users to negotiate the final Project Plan with the apparent RFQ awardee. Such negotiation must not substantively change the scope of the RFQ plan, but can alter timeframes or other incidental factors of the final Project Plan. The Authorized User will provide the Contractor a minimum of five (5) business days’ notice of the final negotiation date. The Authorized User reserves the right to move to the next responsible and responsive bidder if Contractor negotiations are unsuccessful.

  • Contractor’s Bid or Mini-Bid Proposal f. Unincorporated Appendices (if any).

Time is Money Join Law Insider Premium to draft better contracts faster.