Pyrometry Sample Clauses

Pyrometry. ‌ The pyrometer measures the temperature of a surface from some distance. Modern pyrometers can be hand-held devices, which offers a great deal of flexibility. The pyrometer determines the temperature from the spectrum of the thermal radiation from a surface. Hot objects radiate electromagnetic radiation, and the distribution of wavelengths emitted by an object depends on temperature and is given by Xxxxxx`s blackbody radiation law. Pyrometers can operate in different atmospheres in temperatures exceeding 2000 °C. The response time is short which makes these devices suitable for studying dynamic processes or moving objects. However, pyrometers require direct optical access to the hot surface, preventing the use in several applications. For example, the temperature distribution within a closed furnace cannot be determined with a pyrometer. The surface characteristics play an important role, and changes in surface parameters, i.e. emissivity, will lead to significant errors in the measurements. Emissivity changes can result from chemical reactions at the surface, like oxidation. For the given application, it is clear that pyrometers used in an indirect setup only has limited use, but if a setup and configuration can be found that allows the point of measurement to be located within the refractory, pyrometric measurements offers an interesting option for monitoring the ladle refractory temperature.
AutoNDA by SimpleDocs

Related to Pyrometry

  • MSEA SEIU shall have exclusive rights to payroll deduction of membership dues, service fees, and premiums for current MSEA-SEIU spon- sored insurance programs. Deductions for other programs may be mutually agreed to by the parties.

  • meminta nasihat daripada Pihak Xxxxxx dalam semua perkara berkenaan dengan jualan lelongan, termasuk Syarat-syarat Jualan (iii) membuat carian Hakmilik Xxxxx xxxxxx rasmi di Pejabat Tanah xxx/atau xxxx-xxxx Pihak-pihak Berkuasa yang berkenaan xxx (iv) membuat pertanyaan dengan Pihak Berkuasa yang berkenaan samada jualan ini terbuka kepada semua bangsa atau kaum Bumiputra Warganegara Malaysia sahaja atau melayu sahaja xxx juga mengenai persetujuan untuk jualan ini sebelum jualan lelong.Penawar yang berjaya (“Pembeli”) dikehendaki dengan segera memohon xxx mendapatkan kebenaran pindahmilik (jika ada) daripada Pihak Pemaju xxx/atau Pihak Tuanpunya xxx/atau Pihak Berkuasa Negeri atau badan-badan berkenaan (v) memeriksa xxx memastikan samada jualan ini dikenakan cukai. BUTIR-BUTIR HARTANAH : HAKMILIK : Hakmilik strata bagi hartanah ini masih belum dikeluarkan oleh pihak berkuasa. NO. HAKMILIK INDUK / NO. LOT : Geran 203771, Lot 106 Seksyen 3 PEKAN/DAERAH/NEGERI : Pekan Batu Tiga / Petaling / Selangor Darul Ehsan PEGANGAN : Selama-lamanya KELUASAN LANTAI : 93.65 meter persegi (1,008 kaki persegi) PEMAJU : Shanghai Realty (M) Sdn Bhd (350799-U) XXXXXXXX XXX : Xxxxxxxx Xxxxx Bin Xxxxxx BEBANAN : Diserahhak kepada RHB Islamic Bank Berhad (200501003283/680329-V) LOKASI XXX PERIHAL HARTANAH Hartanah tersebut terletak di Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. Hartanah tersebut adalah sebuah unit pangsapuri dikenali sebagai Xxxxx Pemaju No. P5-2-11, Tingkat No. 2, Bangunan No. P5, berserta dengan Xxxxx Aksesori No. GRD-07, Pangsapuri Indahria xxx mempunyai alamat surat-menyurat di Unit No. P5-02-11, Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. HARGA RIZAB: Harta ini dijual “keadaan seperti mana sediada” dengan harga rizab sebanyak RM 270,000.00 (RINGGIT MALAYSIA: DUA RATUS XXX TUJUH PULUH RIBU SAHAJA) xxx tertakluk kepada syarat-syarat Jualan xxx melalui penyerahan hakkan dari Pemegang Serahak, tertakluk kepada kelulusan di perolehi oleh pihak Pembeli daripada pihak berkuasa, jika ada, termasuk semua terma, syarat xxx perjanjian yang dikenakan xxx mungkin dikenakan oleh Pihak Berkuasa yang berkenaan. Pembeli bertanggungjawab sepenuhnya untuk memperolehi xxx mematuhi syarat- syarat berkenaan daripada Pihak Berkuasa yang berkenaan, jika ada xxx semua xxx xxx perbelanjaan ditanggung xxx dibayar oleh Xxxxx Xxxxxxx.Pembeli atas talian (online) juga tertakluk kepada terma-terma xxx syarat-syarat terkandung dalam xxx.xxxxxxxxxxxxxxxx.xxx Pembeli yang berminat adalah dikehendaki mendeposit kepada Pelelong 10% daripada harga rizab dalam bentuk Bank Draf atau Cashier’s Order di atas nama RHB Islamic Bank Berhad sebelum lelongan awam xxx xxxx xxxx xxxxxx bersama-sama dengan segala cukai jualan xxx perkhidmatan (SST) xxx/atau cukai yang menggantikan SST hendaklah dibayar dalam tempoh sembilan puluh (90) hari dari tarikh lelongan kepada RHB Islamic Bank Berhad melalui XXXXXX. Butir-butir pembayaran melalui XXXXXX, xxxx berhubung dengan Tetuan T. Rajagopalu & Co. Untuk maklumat lanjut, xxxx berhubung dengan TETUAN T. RAJAGOPALU & CO, Solicitors for Assignee herein whose address is at Xxxxx 0-0, Xxxxxxxx Xxxx Xxxxxx Xxxxx Xxxxx, 00000 Xxxxxxxx Xxxxxx Xxxxxxxx. Tel: 00-0000000 / Fax: 00-0000000 [Ruj: RG/RHB/0339/2023/SYAFIQAH(yusof)], peguamcara bagi pihak pemegang xxxxx xxx atau pelelong yang tersebut dibawah. RAJAN AUCTIONEERS SDN. BHD. X. XXXXX Xx.00X,Xxxxxxx Xxxx,Xxxxx Xxxx Xxxxxx, ( Xxxxxxxx Berlesen ) 41000 Klang, Selangor Darul Ehsan. H/P: 000-0000000 Tel: 00-00000000 / Fax : 00-00000000 H/P: 012-2738109 Ruj Kami: RA/RHBI/TRC/NS/4220-24(fz) CONDITIONS OF SALE

  • Telemetry The Meters shall be capable of sending meter telemetry data, and Seller shall provide Buyer with simultaneous access to such data at no additional cost to Buyer. This provision is in addition to Seller’s requirements under ISO-NE Rules and Practices, including ISO-NE Operating Procedure No. 18.

  • Geotechnical Services Engineer will obtain all necessary subsurface investigations, tests, reports, and perform related surveys.

  • Local Control Center, Metering and Telemetry The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.

  • Technical Services Party B will provide technical services and training to Party A, taking advantage of Party B’s advanced network, website and multimedia technologies to improve Party A’s system integration. Such technical services shall include:

  • Digital Health The HSP agrees to:

  • Integrated Digital Loop Carriers The feeder portion of some loops may be provide by means of Integrated Digital Loop Carrier (IDLC). IDLC provides a fiber optic cable transmission path that travels directly into BellSouth’s central office local switch. Where BellSouth uses IDLC ,if technically feasible and capacity does exist, BST will provide Al-Call with a Designed DS0 UVL by using alternative provisioning techniques including but not limited to such as “hairpinning” and DAC grooming. Alternative provisioning techniques will be provided at no additional cost to Al-Call . Hairpinning involves providing a DS0 signal from an IDLC-served loop to Al-Call ’s collocation equipment by using a dedicated pathway that traverses BellSouth’s central office switch. BellSouth will provide such DS0 signal to Al-Call by establishing a copper cross connect between the BellSouth switch and Al-Call ’s collocation equipment.

  • Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.

  • Description of Vendor Entity and Vendor's Goods & Services If awarded, this description of Vendor and Vendor's goods and services will appear on the TIPS website for customer/public viewing. Full service mechanical and electrical contractors offering professional solutions and services in HVAC, Refrigeration, Piping, Plumbing, Electrical, Controls and Engineering. Primary Contact Name Please identify the individual who will be primarily responsible for all TIPS matters and inquiries for the duration of the contract. Xxxx Xxxxx Primary Contact Title Primary Contact Title Project Manager Primary Contact Email Please enter a valid email address that will definitely reach the Primary Contact. xxxxxx@xxxxxxxxxxxxxx.xxx Primary Contact Phone Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto-populate your entry with commas once submitted which is appropriate and expected (Ex. 8,668,398,477). Please provide the accurate and current phone number where the individual who will be primarily responsible for all TIPS matters and inquiries for the duration of the contract can be reached directly. 0000000000 Primary Contact Fax Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto-populate your entry with commas once submitted which is appropriate and expected (Ex. 8,668,398,477). 1 0 0000000000 Primary Contact Mobile Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto-populate your entry with commas once submitted which is appropriate and expected (Ex. 8,668,398,477). 1 0000000000 Secondary Contact Name Please identify the individual who will be secondarily responsible for all TIPS matters and inquiries for the duration of the contract. Xxxx Xxxxx Secondary Contact Title Secondary Contact Title

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!