Rejected NPCD Sample Clauses

Rejected NPCD. (a) In the event the non-Proposing Party rejects an NPCD in the Exclusive Areas, or the JRB fails to make a decision regarding an NPCD in the Exclusive Areas within the applicable time frame set forth in Section 4.2, then the Proposing Party either may (i) proceed at its own cost with the research and Development of the product or service specified in such rejected NPCD, so long as it is not a Competing Product, or (ii) abandon the product or service proposed in such NPCD. If the Proposing Party proceeds with the research and/or Development of such product or service and it is Commercialized, such product or service will become an Alliance Product as of the date of first Commercialization. The rejecting Party will pay to the Proposing Party, pursuant to Section 10.14(b)(vii) and (viii), [***] percent ([***]%) of Incremental Net Sales of such Alliance Product until the Proposing Party has recovered [***] percent ([***]%) of the Proposing Party’s Development Costs for such Alliance Product, including any feasibility costs where an NPCD-Feasibility was rejected by the other Party. The date on which the NPCD is rejected by the other Party will set the start date for calculating the [***] percent ([***]%) share of the Development Costs to be reimbursed to the Proposing Party pursuant to this Section 4.4(a). (b) In the event the non-Proposing Party rejects an NPCD in the Conditionally Exclusive Areas or the Optional Areas, or the JRB fails to make a decision regarding an NPCD in the Conditionally Exclusive Areas or the Optional Areas within the applicable time frame set forth in Section 4.2, then, subject to Section 4.5, the Proposing Party may proceed with the research, Development, submission of Regulatory Filing, manufacturing and/or Commercialization activities with respect to any product or service specified in such NPCD as a Non-Alliance Product. (c) For the avoidance of doubt, a Party may conduct research, Development, submission of Regulatory Filing, manufacturing and/or Commercialization activities with respect to products and services in the Optional Areas, except where such product [***] indicates material that has been omitted pursuant to a request for confidential treatment. The omitted material has been filed separately with the Securities and Exchange Commission. or service is a Competing Product, without first submitting to the JRB or obtaining a rejection of an NPCD. (d) In the event that the other Party rejects an NPCD-Feasibility in the Option...
AutoNDA by SimpleDocs

Related to Rejected NPCD

  • Rejected Items; Abandonment (a) The Contractor may deliver, cause to be delivered, or, in any other way, bring or cause to be brought, to any State premises or other destination, Goods, as samples or otherwise, and other supplies, materials, equipment or other tangible personal property. The State may, by written notice and in accordance with the terms and conditions of the Contract, direct the Contractor to remove any or all such Goods (“the “Rejected Goods”) and any or all other supplies, materials, equipment or other tangible personal property (collectively, the “Contractor Property”) from and out of State premises and any other location which the State manages, leases or controls. The Contractor shall remove the Rejected Goods and the Contractor Property in accordance with the terms and conditions of the written notice. Failure to remove the Rejected Goods or the Contractor Property in accordance with the terms and conditions of the written notice shall mean, for itself and all Contractor Parties, that: (1) they have voluntarily, intentionally, unconditionally, unequivocally and absolutely abandoned and left unclaimed the Rejected Goods and Contractor Property and relinquished all ownership, title, licenses, rights, possession and interest of, in and to (collectively, “Title”) the Rejected Goods and Contractor Property with the specific and express intent of (A) terminating all of their Title to the Rejected Goods and Contractor Property, (B) vesting Title to the Rejected Goods and Contractor Property in the State of Connecticut and (C) not ever reclaiming Title or any future rights of any type in and to the Rejected Goods and Contractor Property; (2) there is no ignorance, inadvertence or unawareness to mitigate against the intent to abandon the Rejected Goods or Contractor Property; (3) they vest authority, without any further act required on their part or the State’s part, in the Client Agency and the State to use or dispose of the Rejected Goods and Contractor Property, in the State’s sole discretion, as if the Rejected Goods and Contractor Property were the State’s own property and in accordance with law, without incurring any liability or obligation to the Contractor or any other party; (4) if the State incurs any costs or expenses in connection with disposing of the Rejected Goods and Contractor Property, including, but not limited to, advertising, moving or storing the Rejected Goods and Contractor Property, auction and other activities, the State shall invoice the Contractor for all such cost and expenses and the Contractor shall reimburse the State no later than thirty (30) days after the date of invoice; and (5) they do remise, release and forever discharge the State and its employees, departments, commissions, boards, bureaus, agencies, instrumentalities or political subdivisions and their respective successors, heirs, executors and assigns (collectively, the “State and Its Agents”) of and from all Claims which they and their respective successors or assigns, jointly or severally, ever had, now have or will have against the State and Its Agents arising from the use or disposition of the Rejected Goods and Contractor Property. (b) The Contractor shall secure from each Contractor Party, such document or instrument as necessary or appropriate as will vest in the Contractor plenary authority to bind the Contractor Parties to the full extent necessary or appropriate to give full effect to all of the terms and conditions of this section. The Contractor shall provide, no later than fifteen (15) days after receiving a request from the State, such information as the State may require to evidence, in the State’s sole determination, compliance with this section.

  • Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.

  • Sell-Off Period Notwithstanding expiration or termination of this Agreement, Fig may continue to exercise its rights under the Distribution License for a period of sixty (60) days following expiration or termination, whereupon Fig shall exercise reasonable efforts to terminate any Fig Sales, and to cause any Distributor of Fig to terminate any such sales. Fig shall exercise reasonable efforts to remove or cause any Distributor of Fig to remove from publication or display any advertising relating to the Licensed Game posted by Fig or any such Distributor within the Sell-Off Period.

  • Defective Products A defective product may be returned to PRECISIONARY INSTRUMENTS within thirty (30) days of the delivery date for a refund of the original purchase price with the following amendments/fees. To return a defective product, please contact our Customer Service Department and follow the Return of Products Instructions below.

  • Proposed Goods and Services Proposed Goods and Services pdf D/M/WBE Certification OPTIONAL No response Warranty No response

  • Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.

  • ODUF Pack Rejection 6.4.1 Image Access will notify BellSouth within one (1) business day of rejected packs (via the mutually agreed medium). Packs could be rejected because of pack sequencing discrepancies or a critical edit failure on the Pack Header or Pack Trailer records (e.g., out-of-balance condition on grand totals, invalid data populated). Standard ATIS EMI error codes will be used. Image Access will not be required to return the actual rejected data to BellSouth. Rejected packs will be corrected and retransmitted to Image Access by BellSouth.

  • Pack Rejection 6.4.1 <<customer_name>> will notify BellSouth within one business day of rejected packs (via the mutually agreed medium). Packs could be rejected because of pack sequencing discrepancies or a critical edit failure on the Pack Header or Pack Trailer records (i.e. out-of-balance condition on grand totals, invalid data populated). Standard ATIS EMI Error Codes will be used. <<customer_name>> will not be required to return the actual rejected data to BellSouth. Rejected packs will be corrected and retransmitted to <<customer_name>> by BellSouth.

  • Recall List The Board shall maintain a recall list. Copies of the list will be sent to each person on the list and the Association at least once during the fall and once during the spring each year.

  • Rejected Commodities When a Customer rejects a commodity, Contractor will remove the commodity from the premises within ten (10) calendar days after notification of rejection, and the risk of loss will remain with the Contractor. Commodities not removed by the Contractor within ten

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!