SEDIMENT CONTROL STRUCTURES. Sediment control shall be accomplished using sediment traps, silt fences, settling ponds, slash windrows, or other methods as approved in writing by the Contract Administrator.
SEDIMENT CONTROL STRUCTURES. On the following roads, Purchaser shall install sediment trap in accordance with the SEDIMENT TRAP DETAIL. Sediment control shall be accomplished using sediment traps or other methods as approved in writing by the Contract Administrator. Purchaser shall provide and evenly spread a 3‐inch layer of straw to all exposed soils within 50 feet of a stream or wetland. Soils must be covered before the first anticipated storm event. Soils may not sit exposed during any rain event.
SEDIMENT CONTROL STRUCTURES. On the following road, Purchaser shall install sediment traps in accordance with the table below. Purchaser shall provide and evenly spread a 4‐inch layer of straw to all exposed soils at culvert installations. Soils must be covered before the first anticipated storm event. Soils may not sit exposed during any rain event.
SEDIMENT CONTROL STRUCTURES. 9.1 Contractor shall construct and maintain necessary settlement control structures for runoff as required by mining permits, NPDES permits, and any other applicable permits.
SEDIMENT CONTROL STRUCTURES. On the following road, Purchaser shall install a sediment pond in accordance with the SETTLING POND DETAIL. Sediment control shall be accomplished using sediment traps, silt fences, settling ponds, or other methods as approved in writing by the Xxxxxxxx Xxxxxxxxxxxxx. Purchaser shall provide and evenly spread a 4-inch layer of straw to all exposed soils within 50 feet of a stream or wetland. Soils must be covered before the first anticipated storm event. Soils may not sit exposed during any rain event.
SEDIMENT CONTROL STRUCTURES. On the following road, Purchaser shall install a sediment pond in accordance with the SETTLING POND DETAIL.
SEDIMENT CONTROL STRUCTURES. On the following road(s), Purchaser shall install sediment traps in accordance with the SEDIMENT TRAP DETAIL.
SEDIMENT CONTROL STRUCTURES. On the following road(s), Purchaser shall install sediment control structures as listed below. CP-850 23+25 Install above ground perforated pipe L side. CP-850 30+40 Settling ponds and silt fence in ditch both sides of culvert inlet. DRAFT
SEDIMENT CONTROL STRUCTURES. On the following road(s), Sediment control shall be as listed below or other methods as approved in writing by the Contract Administrator. Purchaser shall provide and evenly spread a 3-inch layer of straw or hay to all exposed soils at bridge installation and at culvert installations within 100 feet of a stream or wetland. Soils must be covered before the first anticipated storm event. Soils may not sit exposed during any rain event. DRAFT Purchaser shall spread grass seed and straw and/or hay mulch on all exposed soils including, but not limited to, stream culverts, waste areas, sidecast pullback areas, stream crossing removals, bridge installations, and other areas directed by the Contract Administrator. Revegetation of exposed soils shall be accomplished by manual dispersal of grass seed unless otherwise detailed in this Road Plan. Other methods of covering must be approved in writing by the Contract Administrator.
SEDIMENT CONTROL STRUCTURES. On the following roads, Purchaser shall install sediment traps, and/or geotextile silt fencing in accordance with the manufacturer’s instructions. FG‐ML 0+00 to 63+29 Install silt fencing at typed water crossings as directed by the contract administrator. There are 3 typed water crossings. Install sediment traps at typed water crossings as directed by the contract administrator. FG‐06 0+00 to 60+92 Install silt fencing at typed water crossings as directed by the contract administrator. There are 4 typed water crossings. Install sediment traps in ditches adjacent to typed water crossings as directed by the contract administrator. FG‐0606 0+00 to 4+93 Install silt fencing at typed water crossings as directed by the contract administrator. There is 1 typed water crossings. FG‐0608 0+00 to 10+18 Install silt fencing at typed water crossings as directed by the contract administrator. There is 1 typed water crossings. BW‐13 22+00 to 24+81 Install silt fencing on right side of road to separate road from typed water.
