SENIOR TECHNICIAN Sample Clauses

SENIOR TECHNICIAN. An employee, who will assist the Xxxxxxx in all aspects of the job, can effectively manage the crew in the Xxxxxxx’x temporary absence. Must be able to survey/Inspect poles and lines, treat poles, and assist in the training of crew members when required. This position is not an automatic step in progression, and will be used at the Company’s discretion.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
SENIOR TECHNICIAN. Has a minimum of two as a technician and is qualified to perform the following tasks: the planning and installation, including testing, terminating, and troubleshooting, of structured cabling systems (SCS). Possesses the skills for fiber-optic installation, including splicing, testing, terminating, and troubleshooting. Must be skilled in the maintenance, service, testing, and repair of PBX systems and computer networking systems. Should have experience installing other special systems; such as security/access control, sound reinforcement, media retrieval, wireless/RF, and/or clock systems, etc. Duties may include the supervision of apprentice technicians, installer/technicians, technicians, and/or other senior technicians. Time requirements may be waived by passing a senior technician equivalency exam developed by the NJATC and administered by the local union or through independent third-party testing sanctioned by the NJATC and supported by the IBEW and NECA.
Sample 1
SENIOR TECHNICIAN. Senior Technicians shall perform the job duties and responsibilities of a Journey Technician and are able to install all Company systems and components; troubleshoot system or component problems; repair or replace equipment in accordance with guidelines; document work and obtain client signatures in accordance with guidelines; drive to and from client locations as necessary; meet with clients to discuss installation, repair and installation of system use; and all other duties as required. Existing Employees shall be reclassified as Senior Technicians effective May 1, 2012 and be excluded from the C.T.S. requirement but are encouraged to obtain it. Senior Technicians shall possess and maintain a Washington State Limited Energy License (EL06).
Sample 1
SENIOR TECHNICIAN. (Key) - Five years experience in production planning and equipment fabrication. This experience should include analysis of systems drawings and specifications; assembly of facility setup; supervision of material purchasing and management; direction, coordination and supervision of assembly production operations; and the implementation and supervision of product testing and quality control requirements. NOTICE OF NON-ALLOWABILITY OF COSTS FOR GENERAL PURPOSE OFFICE EQUIPMENT AND GENERAL PURPOSE INFORMATION TECHNOLOGY EQUIPMENT (JUNE 1998)(NSWCDD)
Sample 1
SENIOR TECHNICIAN. An Employee who, by training or experience is capable of installing, terminating and testing all types of communication cabling. They may also design cabling layout and supervise technicians.
Sample 1
SENIOR TECHNICIAN. Senior Technician skills and duties are as described for the Field Technician as well as duties including, but not limited to, the control of the facility via the control panel and other assigned production, monitoring and reporting activities.
Sample 1
SENIOR TECHNICIAN. An Employee at this level has job skills relevant to tasks performed at this level, and to the level of their training. They will possess the skills as for the Level 4 - Technician Grade 3 and will: 5.1 Be able to conduct Core Skill training. 5.2 Will possess site relevant computer and administration skills. 5.3 Will assist management in ensuring quality standards are met and maintained. 5.4 Will assist management in minimising waste within the factory. 5.5 Will assist management with stock control. 5.6 Will hold the Bandag Advanced Master Craftsman Certificate • Level 5 – Senior Technician. 1. Buff Room 1.1 Initial Inspection: - Inspecting the casing for damage - Marking any damage - Input information into the SAP (computer) if applicable 1.2 Buffing: Removal of old tread 1.3 NDI inspection: Input into SAP if applicable 1.4 Skiving: Removal of any tyre casing injuries 1.5 Repair: Repairing of injuries as required 1.6 Cementing: Coating the casing with UC416
Sample 1
AutoNDA by SimpleDocs
SENIOR TECHNICIAN a person holding corporate membership of CIAT or TechRICS or a recognised professional body, approved by the Authorised Officer, but with five years or more relevant work experience.
Sample 1
SENIOR TECHNICIAN. An Employee who, by training or experience is capable of installing, terminating and testing all types of communication cabling. They may also design cabling layout and supervise Technicians. A Technician shall be responsible for installing all types of communication cable They may also ter- minate and test cabling, under the supervision of a Senior Technician and shall be able to work alone when performing service work. Technicians shall advance from level to level after two thousand (2000) hours of work experience at each level. Technicians shall not advance to Senior Technician until he or she has completed an agreed upon industry education program as prescribed by the Ontario Communication Training Trust Fund.
Sample 1

Related to SENIOR TECHNICIAN

  • Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.

  • New Technology When new or updated technology is introduced into a workplace, it will be the responsibility of the employer to provide appropriate and, if necessary, ongoing training to the employees directly affected. Such training will include any health and safety implications or information that will enable employees to operate the equipment without discomfort and will help maintain their general well-being.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • Background Technology List here prior contracts to assign Inventions that are now in existence between any other person or entity and you.

  • Supplier Personnel The Customer and Supplier agree and acknowledge that in the event of the Supplier ceasing to provide the Services or part of them for any reason, Call Off Schedule 10 (Staff Transfer) shall apply. The Supplier shall not and shall procure that any relevant Sub-Contractor shall not take any step (expressly or implicitly and directly or indirectly by itself or through any other person) without the prior written consent of the Customer to dissuade or discourage any employees engaged in the provision of the Services from transferring their employment to the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor. During the Termination Assistance Period, the Supplier shall and shall procure that any relevant Sub-Contractor shall: give the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor reasonable access to the Supplier's personnel and/or their consultation representatives to present the case for transferring their employment to the Customer and/or the Replacement Supplier and/or to discuss or consult on any measures envisaged by the Customer, Replacement Supplier and/or Replacement Sub-Contractor in respect of persons expected to be Transferring Supplier Employees; co-operate with the Customer and the Replacement Supplier to ensure an effective consultation process and smooth transfer in respect of Transferring Supplier Employees in line with good employee relations and the effective continuity of the Services. The Supplier shall immediately notify the Customer or, at the direction of the Customer, the Replacement Supplier of any period of notice given by the Supplier or received from any person referred to in the Staffing Information, regardless of when such notice takes effect. The Supplier shall not for a period of twelve (12) months from the date of transfer re-employ or re-engage or entice any employees, suppliers or Sub-Contractors whose employment or engagement is transferred to the Customer and/or the Replacement Supplier except that this paragraph 10.5 shall not apply where an offer is made pursuant to an express right to make such offer under Call Off Schedule 10.1 (Staff Transfer) in respect of a Transferring Supplier Employee not identified in the Supplier's Final Supplier Personnel List.

  • Joint Technology The Parties agree that, in order to effectuate the provisions of Section 4.4.2, subject to any exclusive licenses granted hereunder, (a) the non-use provisions of this Article 9 shall not apply to each Party’s use of Joint Technology, and (b) each Party may disclose the Joint Technology to Third Parties who are under terms of confidentiality no less strict than those contained in this Agreement.

  • Personnel Equipment and Material Engineer shall furnish and maintain, at its own expense, quarters for the performance of all Engineering Services, and adequate and sufficient personnel and equipment to perform the Engineering Services as required. All employees of Engineer shall have such knowledge and experience as will enable them to perform the duties assigned to them. Any employee of Engineer who, in the reasonable opinion of County, is incompetent or whose conduct becomes detrimental to the Engineering Services shall immediately be removed from association with the Project when so instructed by County. Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the Engineering Services required under this Contract, or will obtain such personnel from sources other than County. Engineer may not change the Project Manager without prior written consent of County.

  • Subcontractors The Contractor will not subcontract any work under the Contract without prior written consent of the Department. The Contractor is fully responsible for satisfactory completion of all its subcontracted work. The Department supports diversity in its procurements and contracts, and requests that the Contractor offer subcontracting opportunities to certified woman-, veteran-, and minority-owned small businesses. The Contractor may contact the OSD at xxxxxxx@xxx.xxxxxxxxx.xxx for information on certified small business enterprises available for subcontracting opportunities.

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

  • Third Party Materials The Application may display, include, or make available third-party content (including data, information, applications, and other products, services, and/or materials) or provide links to third-party websites or services, including through third- party advertising ("Third-Party Materials"). You acknowledge and agree that Company is not responsible for Third-Party Materials, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality, or any other aspect thereof. Company does not assume and will not have any liability or responsibility to you or any other person or entity for any Third-Party Materials. Third-Party Materials and links thereto are provided solely as a convenience to you, and you access and use them entirely at your own risk and subject to such third parties' terms and conditions.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!