Single/Double Sample Clauses

Single/Double. Triple Based propellant: Are propellants that incorporate the use of nitrocellulose and a combination of nitroglycerin and/or nitroguanidine along with a stabilizer and other ingredients that are used to modify the formulation to achieve a particular performance requirement. The following must be included in the report for single/double/triple based propellants. The test methods mentioned below shall be used unless an alternate method is required by the detail specifications associated with the item being procured. i. Propellant Moisture/Volatiles content shall be tested in accordance with one of the following methods 103.5.2, 101.1.2, 101.2.2 of the latest revision of MIL-STD-286. ii. Density shall be tested in accordance with method 510.3 of the latest revision of MIL-STD-286. iii. Heat of Explosion (HOE) shall be tested in accordance with method 802.1 of the latest revision of MIL- STD-286. iv. Shore “A” Hardness shall be tested in accordance with section 5.4.20 of the latest revision of MIL- STD-2100. v. Uniaxial mechanical properties shall be tested at minimum of three temperatures between -80°F to +225°F. Samples and testing shall be performed in accordance with CPIA Publication No. 21, Class C specimen that shall be tested at a crosshead speed of 2 in/min unless otherwise stated in the contract. A minimum of five samples per temperature is required for testing. The analysis shall include values for maximum stress, stress at rupture, elongation at rupture, elongation at maximum stress, and initial (tangential) modulus at each temperature. Copies of the stress versus strain curves shall be provided as part of the required data. Alternative methods for obtain the mechanical properties of the material can be used as long as the test methods will provided the results required as listed above. vi. Stability: The Contractor shall provide baseline stabilizer content test data indicating the percent weight of virgin stabilizer (example 2-NDPA wt. %) and any daughter products (examples 2.4’-DNDPA, 2.2’ DNDPA, 2.4-DNDPA wt. %) that may exist for each propellant batch at the time of production for the CAD or PAD end item. vii. Strand burn rate testing shall be performed at a minimum of three temperatures between -80°F to +225°F. Burn rates shall be recorded for a minimum of four pressures within the operational pressure range of 500 to 12,000 psi. A minimum of 3 samples shall be tested at each temperature and pressure. viii. Relative Quickness/Force/Vivacity sh...
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Single/Double

  • Single Audit Subrecipient must be audited as required by 2 CFR part 200, subpart F when it is expected that Subrecipient's Federal awards expended during the respective fiscal year equaled or exceeded the threshold set forth in §200.501 Audit requirements.

  • SINGLE-USE PRODUCTS The Board of County Commissioners has established a single-use products and plastic bags policy intended to reduce the use of products which have become globally recognized as having lasting negative impacts on the environment. Neither single-use products nor plastic bags may be sold or disbursed on County property by staff or contracted vendors, except as set forth in Orange County Administrative Regulation 9.01.03. Failure to comply with the Regulation may result in termination of the contract or other contractual remedies, and may affect future contracting with the County. The use of reusable, recyclable, biodegradable, or compostable materials is encouraged.

  • Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.

  • Single Loan All Loans to Borrower and all of the other Obligations of Borrower arising under this Agreement and the other Loan Documents shall constitute one general obligation of Borrower secured, until the Termination Date, by all of the Collateral.

  • System Access Control Data processing systems used to provide the Cloud Service must be prevented from being used without authorization.

  • Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • Start-Up and Synchronization Consistent with the mutually acceptable procedures of the Developer and Connecting Transmission Owner, the Developer is responsible for the proper synchronization of the Large Generating Facility to the New York State Transmission System in accordance with NYISO and Connecting Transmission Owner procedures and requirements.

  • Management Structure Describe the overall management approach toward planning and implementing the contract. Include an organization chart for the management of the contract, if awarded.

  • Contractor Changes The Contractor shall notify DAS in writing no later than ten (10) Days from the effective date of any change in: a. its certificate of incorporation or other organizational document; b. more than a controlling interest in the ownership of the Contractor; or c. the individual(s) in charge of the Performance. This change shall not relieve the Contractor of any responsibility for the accuracy and completeness of the Performance. DAS, after receiving written notice by the Contractor of any such change, may require such agreements, releases and other instruments evidencing, to DAS’s satisfaction, that any individuals retiring or otherwise separating from the Contractor have been compensated in full or that provision has been made for compensation in full, for all work performed under terms of the Contract. The Contractor shall deliver such documents to DAS in accordance with the terms of DAS’s written request. DAS may also require, and the Contractor shall deliver, a financial statement showing that solvency of the Contractor is maintained. The death of any Contractor Party, as applicable, shall not release the Contractor from the obligation to Perform under the Contract; the surviving Contractor Parties, as appropriate, must continue to Perform under the Contract until Performance is fully completed.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!